Instrukcja obsługi Aube Technologies TH123

Streszczenie treści zawartej na stronie nr. 1





 
 




  




TEMPERATURE SPAN ADJUSTMENT
SUMMARY
Press PROG key while RETURN key is pressed in. or button
changes the span setting.
INTRODUCTION
This thermostat can replace most common residential thermostats
and is designed to be used with electric, gas or oil heating and air
conditioning systems using 24 volts control and relay current up to
1.0 ampere.
Several useful functions and operating modes have been incorpo-
rated to adapt a v

Streszczenie treści zawartej na stronie nr. 2

WARNING: After removing the wall plate, if you find that it is Turn on the main switch of the system. The thermostat is ready mounted on a junction box (e.g. a box similar to one behind a light for use. switch or electric outlet), 240 volts circuit may be present and there WIRING DIAGRAM is a danger of electric shock. Please consult a qualified electrician. The TH123 thermostat can be used with any single stage heating WIRE LABELLING and cooling system. You cannot directly use this thermostat

Streszczenie treści zawartej na stronie nr. 3

5-WIRE HEATING AND COOLING SYSTEM your thermostat will operate without batteries, it is recommended to replace the batteries when the display is showing “BATT”. OPERATING MODES The thermostat has four (4) operating modes: AUTOmatic, MANual, TIMER ECONO and REMOTE ECONO. AUTO The AUTOmatic mode executes in sequence (hourly) the recorded programs. Press on the AUTO button. The “PROG” icon and the running program will be displayed. Pressing or button displays the tempera- ture set point of t

Streszczenie treści zawartej na stronie nr. 4

This function holds the temperature setpoint at 5°C PROGRAMMING SCHEDULE (40°F) (heating) in order to prevent freezing. It is not Use following programming schedule as a memorandum before programmable. programming or changing a program by writing down your schedule of heating and cooling. FILTER: The thermostat keeps a record of the number of hours your filter has been used. It will display the total number Weekday programs (Mon.... Fri.) of hours the system has used the filter from the mome