Streszczenie treści zawartej na stronie nr. 1
READ THIS MANUAL BEFORE OPERATING YOUR GAS CHOPPER SCOOTER™
ELECTRA ACCESSORIES, INC. STRONGLY SUGGESTS
THE OPERATOR OF THIS PRODUCT BE 16 YEARS OF AGE OR OLDER.
Assembly and User's Manual
Model #: 88905 / 88969
For the most recent version of this user's manual and for all updated
product information please visit www.electraUSA.com or call Electra
Customer Service / Technical Support Toll-Free Number at:
1-888-467-1234
M-F 10am - 9pm EST
NEITHER ELECTRA ACCESSORIES NOR THE RETAIL SELLER OF
Streszczenie treści zawartej na stronie nr. 2
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THE GAS CHOPPER SCOOTER™. TO DETERMINE IF COVERAGE IS PROVIDED YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT. 1
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS Features and Specifications_________________________________________3 Contents of the Box________________________________________________4 General Safety Guidelines & Restrictions_________________________5,6,7,8 Assembly Instructions Handlebars _________________________________________________9 Lights__________________________________________________9 Backrest___________________________________________10 Mirrors_________________________________
Streszczenie treści zawartej na stronie nr. 4
FEATURES & SPECIFICATIONS Item Specifications Cylinder Displacement 43 cc Engine Type Single Cylinder, 2-Stroke Air-cooled Fuel Type Unleaded Gasoline mixed w/High-Grade 2-Stroke Motor Oil Gas Tank Capacity 1 Liter (.26 Gallons) Gas:Oil Ratio 32:1 Carburetor Double Films Spark Plug NGK-BM6A Spark Plug Gap .6mm-.7mm Starting Options Electric & Manual Pull Start Top Speed 14 MPH Max HP .47 Torque .9Nm/3800rpm Tire Pressure 50PSI Wheel Size (88905)10” Dual Rear (88969)11” Single Rear (88905/88969)
Streszczenie treści zawartej na stronie nr. 5
CONTENTS OF BOX l GAS CHOPPER SCOOTER™ l User/Assembly manual l Tool kit containing 13/16 mm and 8/10 open ended wrench, combination Phillips/flat head screwdriver, 4 mm/5 mm/6 mm/8 mm Allen wrenches, 22 mm socket l Spare fuses (10 Amp x 3 qty) l 2 Keys l 12V Battery charger GAS CHOPPER SCOOTER™ Manual Battery Charger Tool Kit 4
Streszczenie treści zawartej na stronie nr. 6
GENERAL SAFETY GUIDELINES & RESTRICTIONS This Manual contains many notes concerning the consequences of failure to maintain or inspect your GAS CHOPPER SCOOTER™. Your safety and the safety of others is very important. We have provided important safety messages in this manual and on the GAS CHOPPER SCOOTER™. Please read these messages carefully. A safety message alerts you to potential hazards that could hurt you or others. Each safety message is preceded by a safety alert symbol and one
Streszczenie treści zawartej na stronie nr. 7
GENERAL SAFETY GUIDELINES & RESTRICTIONS HELMET USE WHILE RIDING THE MINI SPORT GAS RACER™ Your state DMV, or the city or county where it will be used, may require that you use a helmet that meets the federal Department of Transportation "DOT" requirements (like those used by motorcycle riders) while riding the GAS CHOPPER SCOOTER™. Other states or municipalities may require that a helmet meet the Consumer Product Safety Commission (CPSC) helmet requirements (like those used by human powered
Streszczenie treści zawartej na stronie nr. 8
GENERAL SAFETY GUIDELINES & RESTRICTIONS • GAS CHOPPER SCOOTER ™ should not be ridden by any person that is physically or mentally challenged • GAS CHOPPER SCOOTER ™ should not be ridden by any person with vision, balance, hearing or coordination impairments • GAS CHOPPER SCOOTER ™ should not be ridden by any person using headphones or a cellular phone (They mask traffic sounds and emergency vehicle sirens, distract you from concentrating on what's going on around you, and th
Streszczenie treści zawartej na stronie nr. 9
GENERAL SAFETY GUIDELINES & RESTRICTIONS BEFORE EACH RIDE: • Make sure you properly (per the instructions in the helmet) wear a helmet that meets DOT or CPSC regulations • Wear protective clothing and gloves •Wear eye protection that does not interfere with your peripheral vision • Check local and state laws before operating the GAS CHOPPER SCOOTER™ in any area • Make sure Battery is fully charged • Make sure the horn and headlight are operational • Make sure Brakes are in proper working o
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLY INSTRUCTIONS TM BEFORE ASSEMBLING YOUR GAS CHOPPER SCOOTER , PLEASE BE SURE YOU HAVE ALL NECESSARY PARTS. REFER TO CONTENT OF BOX. PLEASE FOLLOW PROPER ASSEMBLY INSTRUCTIONS. IF YOU DO TM NOT HAVE THE PROPER PARTS NECESSARY TO ASSEMBLE YOUR GAS CHOPPER SCOOTER , PLEASE DO NOT RETURN THE UNIT TO THE ORIGINAL PLACE OF PURCHASE. CALL ELECTRA CUSTOMER SERVICE AT: 1-888-467-1234 M-F 10am - 9pm EST. *For convenience of packing and shipping, the handlebars, throttle, accessory control gri
Streszczenie treści zawartej na stronie nr. 11
ASSEMBLY INSTRUCTIONS BACKREST INSTALLATION 1. Remove the backrest mounting hardware from the GAS CHOPPER SCOOTER™. Attach the backrest by aligning the backrest frame against the fixed mounting brackets, inserting the bolts through the rubber mounting cushion, through the backrest frame, and finally through the fixed mounting bracket on the GAS CHOPPER SCOOTER™. Secure all 4 bolts with self locking nuts. *Make sure the small rubber cushion is located between the heads of the bolts and the bac
Streszczenie treści zawartej na stronie nr. 12
PRE-RIDE ADJUSTMENTS ADJUST FRONT & REAR BRAKES The front and rear brakes your GAS CHOPPER SCOOTER™ have been pre-assembled and pre- adjusted by the manufacture. However, the cables and brakes may need adjustment if they are not slowing or stopping the GAS CHOPPER SCOOTER™ properly. The brakes can be adjusted at the handlebar mounted brake levers. BRAKE ADJUSTMENTS: 1. Determine brake lever has proper slack *Brake lever cannot be too tight or it can snap the cable! *Brake lever can
Streszczenie treści zawartej na stronie nr. 13
Loosen Tighten Loosen Tighten PRE-RIDE ADJUSTMENTS DRIVE CHAIN MAINTENANCE Periodic adjustments of the drive chain will be necessary to maintain proper tension. If the drive chain is loose, it may make a "popping" noise, which indicates a need for immediate adjustment. To manually check the drive chain tension, make sure the drive chain is properly seated on both the front and rear sprockets. Place your finger underneath the center of the drive chain and push upwards to the top of the chopp
Streszczenie treści zawartej na stronie nr. 14
PRE-RIDE ADJUSTMENTS TIRE ADJUSTMENTS: IMPORTANT INFORMATION!!! Proper Tire Pressure 50 PSI 45 40 30 50 60 20 70 10 PSI 0 80 Make sure that the air pressure for all tires is 50 PSI . If the tires have less than the recommended amount of pressure, poor handling, and damage to the tires and rims may occur. Use an air pressure gauge to check for the air pressure of the tire. DO NOT USE GAS STATION AIR FILLING STATIONS AS THE PRESSURE IS USUALLY TOO HIGH AND THE GAUGES ARE INACCURATE. OVER
Streszczenie treści zawartej na stronie nr. 15
PRE-RIDE ADJUSTMENTS MIXING GAS & OIL FOR GAS CHOPPER SCOOTER™ : Your GAS CHOPPER SCOOTER™ is equipped with a two-stroke engine. It is REQUIRED that you ALWAYS premix gasoline and oil prior to filling the gasoline tank. Failure to use a premixed gasoline mixture will cause serious engine problems resulting in total engine failure. If engine fails or seizes while rider is operating GAS CHOPPER SCOOTER™, it could lead to an accident, injuries, damage to the bike, or even death. To mix y
Streszczenie treści zawartej na stronie nr. 16
BATTERY CHARGING THE GAS CHOPPER SCOOTER™ BATTERY To avoid damage to the battery when charging, use only the charger provided with your GAS CHOPPER SCOOTER™. 1. DO NOT CHARGE OR STORE THE GAS CHOPPER SCOOTER™ CLOSER THAN 20 FEET FROM ANY FLAME (E.G. FURNACE, FIREPLACE, WATER HEATER, SPACE HEATER) 2. Be sure to only use 110V AC with the GAS CHOPPER SCOOTER™ charger. Also make sure the plug is inserted into a three prong grounded AC outlet. 3. PLUG the POWER INPUT CORD into t
Streszczenie treści zawartej na stronie nr. 17
STARTING INSTRUCTIONS First, be sure there is pre-mixed gasoline the gas tank. If unsure about the gasoline mixture, refer to the Gasoline/Oil Mixing Instructions section. Make sure both fuel lines are properly attached to the carburetor. There is one main fuel line (black) and one primer bulb line (clear). If these lines are not properly attached, the engine will not run. 1. Make sure battery is fully charged (see battery charging instructions) *When using the electric starter feature,
Streszczenie treści zawartej na stronie nr. 18
SERVICE & MAINTENANCE MAINTENANCE Technological breakthroughs have made components more complex than ever before, and the pace of innovation is increasing. This on-going revolution makes it impossible for this manual to provide all the information required to properly repair and/or maintain your GAS CHOPPER SCOOTER™. In order to help minimize the chances of an accident and possible injury, it is critical that you have all repair and maintenance work performed regularly. For more detailed mai
Streszczenie treści zawartej na stronie nr. 19
SERVICE & MAINTENANCE TIRE MAINTENANCE Make sure that the air pressure for all tires is correct. If the tires have less than the recommended amount of pressure, this may cause the unit the handle poorly or cause damage to the tires. Use an air pressure gauge to check for the air pressure of the tire. DO NOT USE GAS STATION AIR FILLING STATIONS AS THE PRESSURE IS USUALLY TOO HIGH AND THE GAUGES ARE INACCURATE. OVER INFLATION OF THE TIRE COULD CAUSE A BLOW OUT AND CRASH. A lubricant or oil s
Streszczenie treści zawartej na stronie nr. 20
SERVICE & MAINTENANCE GAS:OIL MAINTENANCE *Refer to Pre-Ride Adjustments in this manual (pg. 14) BATTERY MAINTENANCE *Refer to battery charging instructions (pg. 15) BATTERY RECYCLING When maintained and used properly, (by following charging and storage guidelines), the Lead Acid Battery used in this product has a normal life span of many miles. When the battery no longer holds a charge or is unable to be charged properly, it should be removed from the GAS CHOPPER SCOOTER™ and delivered
