Instrukcja obsługi Honeywell TE103NL

Streszczenie treści zawartej na stronie nr. 1

TABLE OF CONTENTS

INTRODUCTION 3
ABOUT HIDEKI ELECTRONICS 3
PRODUCT OVERVIEW 4
REMOTE SENSOR 7
BEFORE YOU BEGIN 9
BATTERY INSTALLATION 10
LOW BATTERY WARNING 11
TABLE STAND 11
Wireless Thermometer
GETTING STARTED 11
with
CHECKING REMOTE AND INDOOR
TEMPERATURES 12
Alarm Clock
MAXIMUM AND MINIMUM READINGS 12
LOST COMMUNICATION 13
CALENDAR AND CLOCK DISPLAY MODES 13
MANUAL SETTINGS 14
SNOOZE 15
DISABLING ALARM 15
PRECAUTIONS 16
SPECIFICATIONS 17
FCC STATEMENT 18
DECLARATION

Streszczenie treści zawartej na stronie nr. 2

FRONT VIEW B. MEMory BUTTON WEATHER AND PRECISE TIME INFORMATION • Press to toggle between current temperature, IN A THREE - LINE LCD DISPLAY minimum and maximum. Readings include both the indoor and outdoor temperatures G • Press & hold to clear memory C. MODE BUTTON • Toggles between the (5) clock modes OUT One-Channel Remote Temperature - Month & Date, MIN MAX Indoor Temperature - Time with seconds, IN - Time with the day of the week, M D w min s Time of Day w

Streszczenie treści zawartej na stronie nr. 3

BEFORE YOU BEGIN NOTE: Batteries in the outdoor remote sensors may • The remote sensor can be placed indoors or have reduced voltage supply and a shorter effective outdoors, the main unit must be placed indoors. range at temperatures below freezing. We • We recommend using alkaline batteries for the recommend using lithium batteries below 32°F remote sensor and main unit when temperatures are (0°C). above 32°F (0°C). We recommend using AA lithium batteries for the remot

Streszczenie treści zawartej na stronie nr. 4

MANUAL SETTINGS LOST COMMUNICATION CLOCK If the main unit display line for the remote sensor • Press and hold MODE button for 3 seconds: the year reading goes blank, press and hold DOWN ( ) button digits will flash. for 2 seconds to begin a new signal search. If the signal • Press UP ( ) or DOWN ( ) to change flashing digits. still isn’t received, make sure that remote sensor is in • After the first value is set, press MODE button again its proper location: to confirm. •

Streszczenie treści zawartej na stronie nr. 5

SPECIFICATIONS FCC STATEMENT Main Unit This device complies with Part 15 of the FCC Rules. Indoor Temperature Operation is subject to the following two conditions: Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F (1) This device may not cause harmful interference, and Temperature resolution: 0.1°C/0.2°F (2) This device must accept any interference received, User-selectable ( °F or °C ) temperature display including interference that may cause undesired operation. Low battery ind