Streszczenie treści zawartej na stronie nr. 1
Owner's Manual
®
7-in.
Buffer / Polisher
Model No.
172.107210
Double Insulated
CAUTION: Read, understand and follow WARRANTY
•
all Safety Rules and Operating Instructions SAFETY
•
in this manual before using this product.
UNPACKING
•
• DESCRIPTION
Sears Brands Management Corporation, OPERATION
•
Hoffman Estates, IL 60179 U.S.A. MAINTENANCE
•
www.sears.com 3025736 ACCESSORIES
•
7/11/12
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. Warranty.........................................................................Page 2 The safety symbols and the explanations with them deserve your careful attention Safety Symbols...............………….................................Page 3 and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no subs
Streszczenie treści zawartej na stronie nr. 3
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS TOOL USE AND CARE SAFETY ! WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire ! WARNING: BE SURE to read and understand all instructions before and/or serious injury. operating this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Save all warnings and instructions for
Streszczenie treści zawartej na stronie nr. 4
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. ELECTRICAL SAFETY cont. SAFETY SYMBOLS FOR YOUR TOOL 2. Power tool plugs must match the outlet. Never modify the plug in any way. The label on your tool may include the following symbols. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. V.......................................................................Volts A.........................
Streszczenie treści zawartej na stronie nr. 5
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BUFFER / POLISHERS cont. ADDITIONAL RULES FOR SAFE OPERATION 6. To avoid splashing wax, ALWAYS start and stop the buffer / polisher on or against the surface to be polished. ! WARNING: BE SURE to read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, 7. After plugging in extension cord, loop extension cord over tool’s stub length plug. fire and /
Streszczenie treści zawartej na stronie nr. 6
UNPACKING DESCRIPTION KNOW YOUR BUFFER / POLISHER ! WARNING: Your tool should NEVER be connected to the power source when you are assembling parts, making adjustments, installing or NOTE: Before attempting to use your buffer / polisher, familiarize yourself removing bonnets, cleaning or when it is not in use. Disconnecting the tool will prevent accidental starting, which could cause serious personal injury. with all of the operating features and safety requirements. 1. Remove the bu
Streszczenie treści zawartej na stronie nr. 7
OPERATION cont. DESCRIPTION cont. BEFORE YOU BEGIN TO WAX, BUFF AND POLISH YOUR CAR: KNOW YOUR BUFFER / POLISHER cont. 1. Remove all road tar, excess grease spots and bug stains with a general-purpose cleaner. Perimeter Non-marring Flat Top Cap Fig. 2 2. Wash, clean and dry your vehicle. Handle System On/Off 3. Make sure the work area is dry. Slide Switch ATTACHING THE WAX APPLICATOR BONNET TO THE FOAM PAD (See Figure 3) Fig. 3 ! WARNING: When changing Stub L
Streszczenie treści zawartej na stronie nr. 8
OPERATION cont. OPERATION cont. RUNNING YOUR BUFFER / POLISHER AND WAXING VEHICLE RUNNING YOUR BUFFER / POLISHER AND WAXING VEHICLE cont. 1. After plugging tool into extension cord, loop 11. When you have finished applying wax with Fig. 10 extension cord over tool’s stub length plug. Fig. 6 the applicator, bonnet, SHUT OFF the Then wrap hook and loop strip around buffer / polisher before removing from the extension cord to secure it in place.
Streszczenie treści zawartej na stronie nr. 9
OPERATION cont. ACCESSORIES CAR CARE TIPS ! WARNING: The use of attachments or accessories that are not 1. Wash and polish the car 3 to 4 times a year to help ensure paint protection. recommended for this tool might be dangerous and could result in serious 2. Wash the car at least every 2 weeks with a car wash solution which will not harm injury. the finish or strip the wax. AVOID washing with household detergents. 3. Wash with a clean sponge and dry with a terry cloth t
Streszczenie treści zawartej na stronie nr. 10
7-in. Buffer / Polisher PARTS LIST MODEL NUMBER 172.107210 The model number will be found on the nameplate of the buffer/polisher. Always mention the model number in all correspondence regarding your tool. Item No. Custom Parts No. Parts No. Parts Description Qty. 1 10721-1-00 SW01.01.27-00 Cord & Plug 1 2 10721-2-00 ST05.01.03-00 Cord Protector 1 3 10721-3-00 ST08.01.07-00 Cord Clamp 1 4 10721-4-00 SW55.57.0-00 Screw 2 5 10721-5-00 SA30.0.09.0-01 Brand 1 6 10721-6-0
