Instrukcja obsługi Harbor Freight Tools 9018

Streszczenie treści zawartej na stronie nr. 1

CHILDREN’S PATIO SET
4 PIECE
Model 09018
ASSEMBLY and OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools .
For technical questions and replacement parts, please call 1-800-444-3353

Streszczenie treści zawartej na stronie nr. 2

Specifications Table Dimensions 28” Dia. x 20-1/4” H Chair Dimensions (2) 12” X 14” X 24” H Umbrella Dimensions 46” Dia. x 30-1/2” L (opened) Umbrella Stand 2-1/8” W x 5-5/8” L Chair Sitting Area 9-1/4” W x 12” L Materials: Hard Wood, Carbon Steel Frames, Gray Paint, Waterproof Umbrella Material CHAIR CAPACITY: 220 LBS. / TABLE CAPACITY: 175 LBS. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts

Streszczenie treści zawartej na stronie nr. 3

9. Maintain the Patio Set with care. Keep it clean for better and safer performance. Inspect the Patio Set periodically, and if damaged, have it repaired by an authorized technician. 10. Stay alert. Watch what you are doing, use common sense. Do not assemble the Patio Set when you are tired. 11. Check for damaged parts. Before using the Patio Set, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for a

Streszczenie treści zawartej na stronie nr. 4

Assembly See the Parts List/Drawing on page 6. 1. Assembling the Table Stand (#1): Use two sets of Screws (#6) on each side of the Brace (#10) to support the bottom of the Table Stand (#1). Align the Umbrella Stand (#9) next to the Brace (#10). See FIGURE 1. FIGURE 1 Table Brace (#10) Stand (#1) Umbrella Screws (#6) Stand (#9) 2. Attach the two Brackets (#11) to the FIGURE 2 Screws (#6) underside of the Table Board (#2) using four sets of Table Screws (#5). See FIGURE 2. Table Board Bracket

Streszczenie treści zawartej na stronie nr. 5

Assembly (continued) 4. Connect the Umbrella (#8) and the FIGURE 4 Pole (#12) using Screw (#7). Slide the Pole (#12) into the Umbrella Stand (#9). See FIGURE 4. Umbrella (#8) Screw (#7) Pole (#12) Umbrella Stand (#9) 5. Attach the Chair Board (#4) to the Chair Stand (#3) FIGURE 5 using four sets of Screws (#6). Chair Board (#4) Note: Remember to set the Patio Set up on a flat, dry, level surface. Do Chair Stand (#3) not deploy the Umbrella (#8) during windy conditions. Maintenance 1. Peri

Streszczenie treści zawartej na stronie nr. 6

Parts List Part No. Description Qty. 1 Table Stand 1 2 Table Board 1 3 Chair Stand 2 4 Chair Board 2 5 Table Screw (6mm x 35mm) 4 Sets 6 Screw (6mm x 20mm) 14 Sets 7 Screw 1 8 Umbrella 1 9 Umbrella Stand 1 10 Brace 1 11 Bracket 2 12 Pole 1 #6 #5 #9 #7 #10 #11 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU- TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO