Streszczenie treści zawartej na stronie nr. 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Models:
350TRSI-AUF
350TRSILP-AUF
SAI Global
SANS 1539:2008
Ref No GSCS20162
AS4553:2008
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow
• Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation. and operation.
WARNING
WARNING: If the information in these
HOT SURFACES!
instructions is not followed exactly, a f
Streszczenie treści zawartej na stronie nr. 2
PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING THIS APPLIANCE. MODELS: 350TRSI-AUF, 350TRSILP-AUF installation to ensure maximum benefit and safety. Failure to follow them will void your ARE SAI GLOBAL APPROVED FOR warranty and may present a fire hazard. NATURAL GAS, PROPANE OR BUTANE The Heat & Glo, a brand of Hearth & Home AS A BALANCED FLUE HEATER. Technologies Inc. warranty will be voided Refer to the appliance data plates for gas by, and Heat & Glo, a brand of Hearth & consu
Streszczenie treści zawartej na stronie nr. 3
SAMPLE Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fireplace, an important documents and product manuals. elegant and clean alternative to wood burning fireplaces. The information contained in this owner’s manual, unless The Heat & Glo gas fireplac
Streszczenie treści zawartej na stronie nr. 4
B. SANS Compliance FOR YOUR SAFETY This appliance is designed to operate on LPG Novida Testing Service IF YOU SMELL GAS: • Turn off as supply at bottle Liquefi ed Petroleum Safe Appliance • Extinguish all naked fl ames Gas Safety Association Verifi cation • Do not operate any electrical appliances of Southern Africa • Ventilate the area • Check for leaks as detailed in this manual If odor persist, contact your dealer or gas supplier immediately. BURN-BACK (FIRE IN BURNER TUBE OR CHAMBER)
Streszczenie treści zawartej na stronie nr. 5
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 6
B. IntelliFire Plus™ Ignition System Wiring . . . . . . . . . . . . . 54 C. Optional Accessories Requirements . . . . . . . . . . . . . . . . 54 D. Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 E. Control Module Operation . . . . . . . . . . . . . . . . . . . . . . . . 55 13 Finishing A. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 63 B. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 1
Streszczenie treści zawartej na stronie nr. 7
C. Limited Lifetime Warranty AUSTRALIAN WARRANTY INFORMATION Warranty information in the attached manual is for international markets, not Australia. For Australian warranty information, please see below. Hearth & Home Technologies Inc (HHT) 7571 215th Street West, Lakeville, MN 55044 0011-1-651-345-1777 www.heatnglo.com HHT extends the following manufacturer’s warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorised dealer. HHT warran
Streszczenie treści zawartej na stronie nr. 8
Warranty Period Heat & Glo Manufactured Appliances and Venting Components Covered EPA Parts Labor Gas Wood Pellet Coal Electric Venting Wood 5 years 1 years X X Castings & baffl es Manifold tubs HEAT & GLO 7 years 3 years X X X chimney and termination 10 years 1 year X Burners, logs and refractory Limited 3 year X X X X X Firebox and heat exchanger Lifetime All Replacement Parts 90 Days X X X X X X X beyond warranty period OTHER RIGHTS The HHT manufacturer’s warranty is in addition to other r
Streszczenie treści zawartej na stronie nr. 9
• Non Heat & Glo venting components, hearth components or other accessories used in conjunction with the appliance. • Any part of a pre-existing fi replace system in which an insert or a decorative gas appliance is installed. • Removal, installation, reinstallation, set up or any other costs associated with a claim including travel and shipping charges for parts • HHT’s obligation under this warranty does not extend to the appliance’s capability to heat the desired space. Informa- tion is provi
Streszczenie treści zawartej na stronie nr. 10
Listing and Code Approvals 1 A. Appliance Certification C. High Altitude Installations N O T I C E : If the heating value of the gas has been reduced, MODELS: 350TRSI-AUF, 350TRSILP-AUF these rules do not apply. Check with your local gas utility or authorities having jurisdiction. LABORA T OR Y : SAI Global TYPE: Gas Space Heating Appliance When installing above 2000 ft. (610 m) elevation: ST ANDARD: AS4553:2008 Reduce input rate 4% for each 1000 ft. (305 m) above 2000 ft. (610 m). D. Non
Streszczenie treści zawartej na stronie nr. 11
User Guide Operating Instructions 2 • Keep remote controls out of reach of children. A. Gas Fireplace Safety • Never leave children alone near a hot fireplace, whether operating or cooling down. WARNING • Teach children to NEVER touch the fireplace. HOT SURFACES! Glass and other surfaces are hot during • Consider not using the fireplace when children will be operation AND cool down. present. Hot glass will cause burns. Contact your dealer for more information, or visit: www. • DO NOT touc
Streszczenie treści zawartej na stronie nr. 12
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Fan Kit F. Fixed Glass Assembly A fan is shipped with this appliance. See Section 9.E. D. Clear Space G. Remote Controls, Wall Controls and Wall Switches W ARNING! DO NOT place combustible objects in front of the fireplace or block louvers. High temperatures may Follow the instructions supplied with the control installed start a fire. See Figure 2.2. to operate your fireplace: Avoid placing candles and other heat-sensitive objects on For safety
Streszczenie treści zawartej na stronie nr. 13
I. Lighting Instructions (IPI) FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) WARNING: If you do not follow these instructions exactly, a fire or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automatically lights the burner. DO NOT try to light the burner by hand. • Immediately call your gas supplier A. This appliance is equipped with an from a neighbor’s phone. Follow the interm
Streszczenie treści zawartej na stronie nr. 14
J. Control Module Operation MODULE 1. The control module has an ON/OFF/REMOTE selector switch that must be set. See Figure 2.3. OFF Position: Appliance will ignore all power inputs and will not respond to any commands from a wall switch or remote. The unit should be in the OFF position during installation, service, battery installation, fuel conversion, and in the event that the control goes into LOCK-OUT SELECTOR mode as a result of an error code. SWITCH ON Position: Appliance wil
Streszczenie treści zawartej na stronie nr. 15
K. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fireplace off and allow it to completely cool. • Remove fixed glass assembly. See Section 9.E. • Clean fixed glass assembly. See Section 3. • Replace the fixed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fire- place. NOTICE! Open window s for air circulation during fire- place brea
Streszczenie treści zawartej na stronie nr. 16
Maintenance and Service 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace. Frequency: Annually By: Homeowner When properly maintained, your fireplace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualified service technician. • Assess condition of screen and replace as necessary. A. Maintenance Tasks-Homeowner • Inspect
Streszczenie treści zawartej na stronie nr. 17
B. Maintenance Tasks-Qualified Service Burner Ignition and Operation Technician Frequency: Annually The following tasks must be performed by a qualified ser- By: Qualified Service Technician vice technician. Tools needed: Protective gloves, vacuum cleaner, whisk Gasket Seal and Glass Assembly Inspection broom, flashlight, voltmeter, indexed drill bit set, and a manometer. Frequency: Annually • Verify burner is properly secured and aligned with pilot By: Qualified Service Technician or ignit
Streszczenie treści zawartej na stronie nr. 18
Installer Guide Getting Started 4 A. Typical Appliance System NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual HORIZONTAL TERMINATION CAP Note: Dual venting configurations (SECTION 10.H) ARE NOT allowed. Appliance MUST be vented EITHER vertically OR horizontally. VERTICAL TERMINATION CAP (SECTION 10.L) NON-COMBUSTIBLE ROOF FLASHING MAINTAINS
Streszczenie treści zawartej na stronie nr. 19
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to op- • Carefully remove the appliance and components from erate with all combustion air siphoned from outside of the the packaging. building and all exhaust gases expelled to the outside of • The vent system components and decorative doors and the building. No additional outside air source is required. fronts may be shipped in separate packages. Installation MUS
Streszczenie treści zawartej na stronie nr. 20
Framing and Clearances 5 NOTICE: Illustrations reflect typical installations and are A. Selecting Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for the appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. D
