Instrukcja obsługi SIIG 04-0207A

Streszczenie treści zawartej na stronie nr. 1

Low Profile PCI-1S1P
Quick Installation Guide
Introducing the Low Profile PCI -1S1P
The Low Profile PCI -1S1P conforms to the new PCI card form factor
standard made for space constrained system designs.
Features and Benefits
• Conforms to PCI v2.2 Plug and Play
 Full support for DOS- and Windows-based software
 IRQ sharing feature eliminates IRQ conflicts
Serial interface:
 High-speed 16550 UART serial port (9-pin) supports baud rates
up to 920Kbps. Works with various types of serial dev

Streszczenie treści zawartej na stronie nr. 2

Package Contents  One Low Profile PCI -1S1P board  One Driver Installation diskette  One 5-year warranty card  This quick installation guide Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touch

Streszczenie treści zawartej na stronie nr. 3

3. From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in a:\Win95, then click OK. 4. Remove the diskette and select Yes to restart the computer for the setup to take effect. Windows 98/98 SE: 1. At the Add New Hardware Wizard windows, click Next. 2. Select Search for the best driver for your devices (Recommend), then click Next. 3. Select Specify a location, insert the Driver Installation diskette and type in a:\Win98, then clickNext. 4. Click Next, then Fini

Streszczenie treści zawartej na stronie nr. 4

4. From Choose Destination Location window, click Next. 5. Remove the Driver Installation diskette, select Yes to restart Windows and click Finish. To verify successful installation in Windows NT 4.0: 1. Go to Start / Setting / Control Panel, double click SIIG Cyber PCI 20X device icon. 2. New COM port address and LPT number will be assigned for the ports when successfully installed. The board is ready to connect devices. Note If you plan to connect a parallel device other than a printer to t

Streszczenie treści zawartej na stronie nr. 5

To verify successful installation in Windows 2000: 1. Double click My Computer, Control Panel, System, Hardware, and click Device Manager. 2. Click on the + (plus sign) in front of Ports (Com & LPT). 3. New Cyber port(s) should be listed. DOS/Windows 3.1x: 1. Insert the Driver Installation diskette, from the C: prompt, type in copy a:\dos\*.*, then press . 2. Type in edit autoexec.bat, then press . 3. Add C:\CB20XPC.exe at the bottom of the autoexec.bat file. 4. Go to File, save t

Streszczenie treści zawartej na stronie nr. 6

Troubleshooting Problem: I am installing a parallel port(s) and my system freezes up when Windows tries to install the driver for my printer port. Solution: Enter your system bios, set the onboard parallel port I/O address to 278h, save and exit. In certain systems, the address 278h is reserved for ISA boards. So when the PCI parallel port tries to capture this address, your system gets confused and freezes up. Problem: I am installing serial port(s) and these ports show up without COM port as

Streszczenie treści zawartej na stronie nr. 7

Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on ONLINE SUPPORT. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away. Return Merchandise Authorization (RMA) SIIG warrants to the original buyer of the product that the hardware is free of defects in materials and workmanship for a period of one, two or five years from the date of purchas

Streszczenie treści zawartej na stronie nr. 8

PRODUCT NAME MODEL NUMBER Low Profile PCI -1S1P LP0407 FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTICE: This equipment