Streszczenie treści zawartej na stronie nr. 1
1. 3.3V AGP card (essentially this means all AGP 1X and AGP 2X
cards) are not supported. Only 1.5V AGP cards essentially this
means any card that supports AGP 4X or higher) can be used in
this mainboard.
2. Please read the user guide before proceeding with your installation.
Serious damage may occur if the procedure is not followed
properly.
3. For immediate Technical questions, please visit
http://www.soyousa.com/support and http://www.soyousa.com/kb.
4. Make sure you use
Streszczenie treści zawartej na stronie nr. 2
SY-P4I845PEISA SY-P4I845GEISA Motherboard **************************************************** mPGA Socket 478 Processor supported Intel 845PE/GE AGP/PCI/ISA 400/533 MHz Front Side Bus supported ATX Form Factor **************************************************** User's Manual
Streszczenie treści zawartej na stronie nr. 3
SOYO™ SY-P4I845PEISA/GEISA Copyright © 2003 by Soyo Computer Inc. Trademarks: Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belong to their respective companies. Copyright Notice: All rights reserved. This manual has been copyrighted by Soyo Computer Inc. No
Streszczenie treści zawartej na stronie nr. 4
Table of Contents SY-P4I845PEISA/GEISA Table of Contents CHAPTER 1 MOTHERBOARD DESCRIPTION ............................... 1 1-1 INTRODUCTION................................................................ 1 1-2 UNPACKING THE MOTHERBOARD............................... 1 1-3 KEY FEATURES ................................................................. 2 1-4 HANDLING THE MOTHERBOARD................................. 4 1-5 ELECTROSTATIC DISCHARGE PREC
Streszczenie treści zawartej na stronie nr. 5
Table of Contents SY-P4I845PEISA/GEISA CHAPTER 55 USB 2.0 DRIVER INSTALLATION........................... 82 v
Streszczenie treści zawartej na stronie nr. 6
Motherboard Description SY-P4I845PEISA/GEISA Chapter 1 MOTHEBOARD DESCRIPTION 1-1 INTRODUCTION The SY-P4I845PEISA/GEISA AGP/PCI/ISA Motherboard is a high-performance Socket 478 processor supported ATX form-factor system board. SY-P4I845PEISA/GEISA uses the Intel 845GE/GV Chipset technology. This Motherboard is fully compatible with industry standards and adds many technical enhancements. 1-2 UNPACKING THE MOTHERBOARD When unpacking the Motherboard, check for the following items: Th
Streszczenie treści zawartej na stronie nr. 7
Motherboard Description SY-P4I845PEISA/GEISA Warning: Do not unpack the Motherboard from its anti-static packaging until you are ready to install it. Like most electronic equipment, your Motherboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpainted portion of the computer chassis to drain the static charges. Handle the Motherboa
Streszczenie treści zawartej na stronie nr. 8
Motherboard Description SY-P4I845PEISA/GEISA 4 x 32-bit bus master PCI slots 3 x 16-bit ISA slot Enhanced IO Floppy disk controller 2x EIDE controllers with support for up to 4 Ultra DMA 33/66 /100 devices Standard/EPP/ECP parallel port 2x 16550 compatible serial ports IrDA compatible infrared port 6x USB2.0 ports onboard PS/2 mouse connector PS/2 keyboard connector AC97 4-Channel AUDIO LAN ON-BOARD Supports 10/100 Mbps base-T Ethernet. SMART CARD READER Compliant
Streszczenie treści zawartej na stronie nr. 9
Motherboard Description SY-P4I845PEISA/GEISA managing the system easy and safe. Hardware Monitor The integrated Hardware Monitor IC and Hardware doctor software enables the user to monitor system voltages, temperatures and FAN speeds. This makes sure that the user is full control of the system. Power Failure Resume Function This function can be set in the BIOS, and determines whether the system will automatically turn on again after a power failure. This function is indispensable for
Streszczenie treści zawartej na stronie nr. 10
Motherboard Description SY-P4I845PEISA/GEISA 1-5 ELECTROSTATIC DISCHARGE PRECAUTIONS Make sure to ground yourself before handling the Motherboard or other system components. Electrostatic discharge can easily damage the components. Note that you must take special precautions when handling the Motherboard in dry or air-conditioned environment. To protect your equipment from electrostatic discharge, take the following precautions: Do not remove the anti-static packaging until you are rea
Streszczenie treści zawartej na stronie nr. 11
Motherboard Description SY-P4I845PEISA/GEISA 1-6 SY-P4I845PEISA MOTHERBOARD LAYOUT PS/2 KB PS/ PS/2 2 M Mo ous use e Connector Connector COM A +12V Power PRT ATX Power USB 1_2 LAN Connector 5 1 Audio out / Front out J30 62 Audio in / REAR out DDR1 DDR2 MIC IN / Center & Bass out IDE 2 IDE 1 AGAME LAN DAVICOM DM9102AE AGP Slot 3V Lithium Battery C-Media PCI Slot #1 CMI9738 JP5 CMOS Clear AUXIN1 Jumper 4411 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6 10 6 1 5 SIRCON I
Streszczenie treści zawartej na stronie nr. 12
Motherboard Description SY-P4I845PEISA/GEISA 1-7 SY-P4I845GEISA MOTHERBOARD LAYOUT PS/2 KB PS/ PS/2 2 M Mo ous use e Connector Connector COM A +12V Power VGA out PRT ATX Power USB 1_2 LAN Connector 5 1 Audio out / Front out J30 62 Audio in / REAR out DDR1 DDR2 MIC IN / Center & Bass out IDE 2 IDE 1 AGAME LAN DAVICOM DM9102AE AGP Slot 3V Lithium Battery C-Media PCI Slot #1 CMI9738 JP5 CMOS Clear AUXIN1 Jumper 4411 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6 10 6 1 5 SI
Streszczenie treści zawartej na stronie nr. 13
Motherboard Description SY-P4I845PEISA/GEISA 1-8 SY-P4I845PEISA MOTHERBOARD COMPONENTS A BC D E F G H I J AE K L M AD AC N AB O P Q R AA S T U V Z Y X W 8
Streszczenie treści zawartej na stronie nr. 14
Motherboard Description SY-P4I845PEISA/GEISA A +12V Power Connector B MIC & LAN LED Connector C ATX Power Supply Connector D Davicom Lan Chip E Socket 478 Connector F Intel 845PE North Bridge Chip G AGP Slot H DDR DIMM Banks I CPU Cooling Fan (Fan1, 2) Connector J 5V Stand-By Indicator LED K Bus Mastering EIDE/ATAPI Ports L CMOS Clear Jumper M 3V Lithium Battery N Front Panel Connectors O Intel 82801DB South Bridge Chip P 32-bit PCI Slots Q USB 2.0 Connector R Flop
Streszczenie treści zawartej na stronie nr. 15
Motherboard Description SY-P4I845PEISA/GEISA 1-9 SY-P4I845GEISA MOTHERBOARD COMPONENTS A BC D E F G H I J AE K L M AD AC N AB O P Q R AA S T U V Z Y X W 10
Streszczenie treści zawartej na stronie nr. 16
Motherboard Description SY-P4I845PEISA/GEISA A +12V Power Connector B MIC & LAN LED Connector C ATX Power Supply connector D Davicom Lan Chip E Socket 478 Connector F Intel 845GE North Bridge Chip G AGP Slot H DDR DIMM Banks I CPU Cooling Fan (Fan1, 2) Connector J 5V Stand-By Indicator LED K Bus Mastering EIDE/ATAPI Ports L CMOS Clear Jumper M 3V Lithium Battery N Front Panel Connectors O Intel 82801DB South Bridge Chip P 32-bit PCI Slots Q USB 2.0 Connector R Flop
Streszczenie treści zawartej na stronie nr. 17
Hardware Installation SY-P4I845PEISA/GEISA Chapter 2 HARDWARE INSTALLATION Congratulations on your purchase of SY-P4I845PEISA/GEISA Motherboard. You are about to install and connect your new Motherboard. Note: Do not unpack the Motherboard from its protective anti-static packaging until you have made the following preparations. 2-1 PREPARATIONS Gather and prepare all the following hardware equipment to complete the installation successfully: 1. Socket mPGA478 processor with CPU coo
Streszczenie treści zawartej na stronie nr. 18
Hardware Installation SY-P4I845PEISA/GEISA 2-2 INSTALLATION GUIDE We will now begin the installation of the Motherboard. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step1- Install the Central Processing Unit (CPU). Step2- Install memory modules. Step3- Install expansion cards. Step4- Connect cables, case wires, and power supply. Step5- Power on and enter BIOS setup. Step6- Install supporting software tools. See Chapter 4 f
Streszczenie treści zawartej na stronie nr. 19
Hardware Installation SY-P4I845PEISA/GEISA 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3. Seat the processor in the socket completely and without forcing. 14
Streszczenie treści zawartej na stronie nr. 20
Hardware Installation SY-P4I845PEISA/GEISA 4. Then close the socket handle to secure the CPU in place. Remember to connect the CPU Cooling Fan to the appropriate power connector on the Motherboard. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore prolonging the life of your CPU. CPU Fan Installation Your Socket 478 processor kit comes with a cooling fan. Mount the fan on the processor according to the instructions provided by the
