Streszczenie treści zawartej na stronie nr. 1
.
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2
SPECIAL NOTES ON LCD MONITORS ------------------- 3
BEFORE YOU OPERATE THE MONITOR --------------------- 3
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
INSTALLATION INSTRUCTIONS --------------------------- 4
CONTROLS AND
Streszczenie treści zawartej na stronie nr. 2
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generat
Streszczenie treści zawartej na stronie nr. 3
PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit in
Streszczenie treści zawartej na stronie nr. 4
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes o
Streszczenie treści zawartej na stronie nr. 5
INSTALLATION INSTRUCTIONS POWERCORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord into your LCD monitor’s DC-power-input. The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the ty
Streszczenie treści zawartej na stronie nr. 6
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. 1. Connect the power adapter dc cable to the DC-In port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. (only Dual-Input Model)Connect one end of the 24-pin DVI cable to the 3. back of the monitor and connect the other end to the computer’s DVI port. 4. Connec
Streszczenie treści zawartej na stronie nr. 7
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5 ° to 15 °. Figure 2 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Careful attention is required not t
Streszczenie treści zawartej na stronie nr. 8
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power button to turn on the monitor position. The power indicator will light up.
Streszczenie treści zawartej na stronie nr. 9
FRONT PANEL CONTROL • /Power Button: Press this button to turn the monitor ON or OFF, And display the monitor’s state. • Power Indicator: Blue — Power On mode. Orange — Power saving. Light blue — Off mode. • /MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status. •
Streszczenie treści zawartej na stronie nr. 10
HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4. I. Analog-Only Model II. Dual-Input Model, Analog Signal Input
Streszczenie treści zawartej na stronie nr. 11
III. Dual-Input Model, Digital Signal Input ADJUSTING THE PICTURE The descriptions for function control LEDS Sub Main Sub Menu Menu Description Menu Icon Item Icon Adjusts the contrast between the Contrast foreground and background of the screen image. Adjusts the background brightness of the Brightness screen image. Adjusts picture Focus (available in Analog Focus mode only). Adjusts picture Clock (available in Analog Clock mode only). Adjust picture
Streszczenie treści zawartej na stronie nr. 12
N/A English 繁體中文 N/A N/A Deutsch N/A Français Multi-language selection. N/A Español N/A Italiano 简体中文 N/A N/A 日本語 H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Adjust the OSD timeout. Timeout Auto Adjust the H/V Position, Focus and (only N/A Auto Config Clock of picture. Analog- input Model) N/A Analog Select input signal from analog (D-Sub) (only Dual- N/A Digital Select input signal from
Streszczenie treści zawartej na stronie nr. 13
HOW TO OPTIMIZE THE DOS-MODE PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that cont
Streszczenie treści zawartej na stronie nr. 14
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent Picture is fuzzy *Adjust the Contrast and Brightness Controls. Picture bounces or a wave *Move electrical devices that may cause pattern is present in th
Streszczenie treści zawartej na stronie nr. 15
Screen image is not centered or sized *Adjust pixel frequency (CLOCK) and properly. FOCUS or press hot-key (AUTO) Picture has color defects *Adjust RGB color or select color (white does not look white) temperature Horizontal or vertical disturbances on *Use win 95/98 shut-down mode the screen Adjust CLOCK and FOCUS or perform hot- key (AUTO-key). CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows v
Streszczenie treści zawartej na stronie nr. 16
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. 2. Check the signal -cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table(See page 18). 41L1700-786-7A 英文 15
Streszczenie treści zawartej na stronie nr. 17
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 43.2cm(17.0") Pixel pitch 0.264mm( H )x 0.264mm( V ) 2 Brightness 260cd/m (Typical) Contrast 450:1(Typical) Viewable angle 140 ° (H) 140 ° (V) Response time 16 ms(Tr+Tf)Tr=4ms/Tf=12ms Video R,G,B Analog Interface Digital interface(Dual-Input Model) H-Frequency 30KHz – 83KHz V-Frequency 55-75Hz Display Colors 16.2M Colors Dot Clock 165MHz Max. Resolution 1280 x 1024 @75Hz TM Plug & Play VESA
Streszczenie treści zawartej na stronie nr. 18
Switch • Auto Adjust Key • / Volume • Power Button • MENU/ Exit External Controls: Functions • Contrast • Brightness • Focus • Clock • H.Position • V.Position • Input signal Selection (Dual model only) • Language • Auto configuration (Analog model only) • (Warm) Color • (Cool)Color • RGB Color temperature • Reset • OSD position . timeout • Display information • Exit Power Consumption ( Maximum ) 45 Watts Audio Output Rated Power 1.5W rms (P
Streszczenie treści zawartej na stronie nr. 19
Preset Display Modes HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY(KHz) FREQUENCY(Hz) 640 × 480 31.469 59.940 VGA 640 × 480 37.500 75.000 800 × 600 37.879 60.317 SVGA 800 × 600 46.875 75.000 1024 × 768 48.363 60.004 VESA 1024 × 768 56.476 70.069 XGA 1024 × 768 60.023 75.029 1280 × 1024 64.000 60.000 SXGA 1280 × 1024 80.000 75.000 IBM DOS 720 × 400 31.469 70.087 1024 × 768 48.780 60.001 MAC XGA 1024 × 768 60.241 74.927 41L1700-786-7A 英文 18
Streszczenie treści zawartej na stronie nr. 20
CONNECTOR PIN ASSIGNMENT 15 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Logic Ground 3. Blue 11. Monitor Ground 4. Monitor Ground 12. DDC-Serial Data 5. DDC-return 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground (Dual-Input Model) Pin Meaning Pin Meaning Pin Meaning 1. TMDS Data2- 9. TMDS Data1- 17. TMDS Data0- 2. TMDS Data2+ 10. TMDS Data1+
