Streszczenie treści zawartej na stronie nr. 1
COLOR VIDEO MONITOR
INSTRUCTIONS
TM-1051DG
LCT1993-001B-H
LCT1993-001A_Cover-ff.p65 1 06.1.27, 17:34
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing this JVC Color Video Monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling of the monitor, be fully aware of all the following precautions. FCC NOTICE (U.S.A. only) WARNINGS CAUTION: Changes or modifications not approved by To prevent fire or shock hazard, do not expose this JVC could void the user’s authori
Streszczenie treści zawartej na stronie nr. 3
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 220-240 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. Power cord Power supply voltage: AC 120 V AC 220-240 V AC 220-240 V Countries: U.S.A. and Canada European countries United Kingdom Warning: • Do not use the
Streszczenie treści zawartej na stronie nr. 4
Controls and Features 7 Front Panel 1 234567 8 9 p 1 Tally lamp 4 MENU control This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. ☞ “How to Use the MAKE/TRIGGER Terminal” on pages Displays or closes a menu screen. 18 and 19 •You can set the lamp color to red or green. ☞ “TALLY SELECT” on page 14, “How to Use the MAKE/TRIGGER Terminal” on pages 18 and 19 While a menu screen is displayed, selects or adjusts the menu items 2 CHROMA ( )/PHASE ( ) button by moving the control
Streszczenie treści zawartej na stronie nr. 5
5 UNDER SCAN button 7 About the status display Reduces the screen size so that the whole screen is Displays information of the current input selection displayed. and the monitor settings for about 3 seconds. To show the status display, set “STATUS DISPLAY” 6 SCREENS CHECK button to “AUTO” or “MANUAL” beforehand. Only the selected luminance signal or RGB element ☞ “STATUS DISPLAY” on page 16 of a video signal is displayed. Each time you press Pressing the INPUT SELECT button currently this button
Streszczenie treści zawartej na stronie nr. 6
Controls and Features (cont.) 7 Rear Panel 3 1 2 4 5 1 Main power switch 4 External synchronized signal input/output Turns the main power on and off. terminals (for both VIDEO A and VIDEO B) •I : on : off Input (IN) and output (OUT) terminals for the NOTE: composite synchronized signals. •You need to turn on the stand-by button on the front •To use these terminals, set “SYNC SELECT” to panel to turn on the monitor after turning on the main “EXT.” power switch. ☞ “SYNC SELECT” on page 14 NOTES:
Streszczenie treści zawartej na stronie nr. 7
678 To select the audio channel: 6 Audio output terminals (E. AUDIO MONITOR Using the MENU control, you can select the audio OUT) channel output from the audio output terminal. Decodes EMBEDDED AUDIO signals and outputs ☞ “4 MENU control” on page 4 them as analogue signals. • Set the group of the audio output modes you want to • See the table below for the combinations of the select beforehand. audio channels from the CH1 or CH2 terminal. ☞ “E. AUDIO GROUP” on page 14 Audio output terminals Audi
Streszczenie treści zawartej na stronie nr. 8
Preparation 7Attaching the Power Cord Holder • The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet. • The Power Cord Holder consists of two parts; a case and a cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). Caution: Use only the provided screws. 2. Attach the Power Cord Holder cover to the AC power cord. Close the cover until it clicks. 3. Plug in the AC power cord to the AC inle
Streszczenie treści zawartej na stronie nr. 9
Basic Menu Operations 7About the Menu Screens This monitor features MAIN MENU which contains the functions normally used and SET-UP MENU which contains the initial settings of the monitor. MAIN MENU Items Functions APERTURE CONTROL Compensates the frequency characteristics of the luminance signal of a video signal. sub menu SELECT Selects the positions and the contents of the sub-menu display. MARKER Controls ON/OFF and other settings of the MARKER SELECT, ASPECT SELECT, and SAFETY MARKER functi
Streszczenie treści zawartej na stronie nr. 10
Basic Menu Operations (cont.) 7Displaying the Menu 7About “ sub menu” When “ sub menu” is displayed in the menu, only Screens selected item in that menu can be displayed and To display MAIN MENU adjusted. This allows you to make adjustments while Press the MENU control on the front panel. looking at the actual screen. To display SET-UP MENU Press the CHROMA/PHASE button while moving the MENU control to . NOTES: •To exit the menu, press the MENU control several times. • The menu automatically exi
Streszczenie treści zawartej na stronie nr. 11
How to Use MAIN MENU 7MAIN MENU Screens MAIN MENU Setting Items Move the MENU control to . ☞ page 10 ☞ page 12 Move the MENU control to / to adjust an ☞ page 12 item. About “ sub menu” and “reset,” ☞ page 10 *To go back to the previous menu, press the MENU control. NOTE: • Some items may not appear on the menu depending on the input or the input signal. Those items are not available to use. 7Functions and Adjustment Range of Items APERTURE CONTROL sub menu SELECT Compensates the Selects the po
Streszczenie treści zawartej na stronie nr. 12
How to Use MAIN MENU (cont.) 7 ASPECT SELECT/R-ASPECT SELECT MARKER Selects the aspect ratio. Controls ON/OFF and other • 4:3/13:9/14:9 settings of the MARKER SELECT, ASPECT SELECT, and SAFETY MARKER functions included in the MARKER function. NOTES: •For the 4:3 screen ratio, only SAFETY MARKER and R- SAFETY MARKER are displayed. 7 SAFETY MARKER/R-SAFETY MARKER •To set up non-“R-” items, press the MARKER button on the Displays dotted lines to indicate the areas front panel. An external control s
Streszczenie treści zawartej na stronie nr. 13
How to Use SET-UP MENU 7SET-UP MENU Screens SET-UP MENU Setting Items Move the MENU control to . ☞ page 17 Move the MENU control to / to adjust an item. About “ sub menu” and “reset,” ☞ page 10 *To go back to the previous menu, press the MENU control. NOTE: • Some items may not appear on the menu depending on the input or the input signal. Those items are not available to use. 13 EN04_LCT1993-001A-f.p65 13 06.1.5, 18:24
Streszczenie treści zawartej na stronie nr. 14
How to Use SET-UP MENU (cont.) 7Functions and Adjustment Range of Items • The tally lamp is controlled using the MAKE/TRIGGER FUNCTION SETTING terminal of the REMOTE (external control) terminals. Sets the control systems for ☞ “How to Use the MAKE/TRIGGER Terminal” on the COLOR SYSTEM, pages 18 and 19 synchronized signal, RUSH 7 REMOTE SYSTEM DELAY TIME, colors of the Sets the MAKE/TRIGGER terminal. tally lamp, groups of the ☞ “How to Use the MAKE/TRIGGER Terminal” on pages audio output modes, a
Streszczenie treści zawartej na stronie nr. 15
PICTURE SUB ADJ. SIZE/POSI. ADJ. The standard value (“00”) of Adjusts the size and the picture adjustment is position of the picture. initially set at the factory. You can adjust the standard value as you want. 7 CONTRAST 7 H. SIZE • –20 O 00 O +20 Adjusts the horizontal screen size. • –20 O 00 O +20 (*) 7 BRIGHT –: Reduces the screen size horizontally. • –20 O 00 O +20 +: Enlarges the screen size horizontally. 7 CHROMA *You can adjust this item with in the range between 00 • –20 O 00 O +20 and
Streszczenie treści zawartej na stronie nr. 16
How to Use SET-UP MENU (cont.) DISTORTION ADJ. STATUS DISPLAY Compensates the picture Sets the items related to the distortion, tilt, and the color display screens, such as heterogeneity caused by the status display or the the geomagnetic influence. AUDIO LEVEL METER display (see below). 7 STATUS DISPLAY 7 PARALLELOGRAM Sets the status display. Compensates the parallelogram picture distortion. •AUTO/MANUAL/OFF • –20 O 00 O +20 ☞ “About the status display” on page 5 –: Moves the upper side of the
Streszczenie treści zawartej na stronie nr. 17
CONTROL LOCK Prohibits altering the monitor operations except turning the monitor on/off and deactivating this function. • ON/OFF NOTES: • When “CONTROL LOCK” is set to “ON,” “ Control lock on!” appears on the screen if you try to operate the monitor. • Operating the monitor by the external control is available if this function is activated. all reset Resets all the settings you have made to factory-preset values. • Adjustments made by using the front panel buttons • When “1-8” is selected, the
Streszczenie treści zawartej na stronie nr. 18
How to Use the External Control 7About the External Control The Monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the MAKE (make contact) or TRIG. (trigger) system selected in the function setting. MAKE (make contact) system: Controls the function by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it. TRIG. (trigger) system: Controls the function by inputting the pulse signal instantaneously to the corresponding
Streszczenie treści zawartej na stronie nr. 19
Functions controlled by the MAKE/TRIGGER Terminal Display Functions to be controlled Opening Short-circuiting *1 INP. A Changes the input to INPUT A Invalid Valid INP. B Changes the input to INPUT B Invalid Valid INP. C Changes the input to INPUT C Invalid Valid INP. D Changes the input to INPUT D Invalid Valid CO. OFF Turns on/off COLOR OFF Off On (Monochrome screen) *2 MARKER Turns on/off MARKER Off On *2 ASPECT Changes ASPECT 4:3 16:9 MA. SEL Selects the MARKER settings Selects the settings w
Streszczenie treści zawartej na stronie nr. 20
Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Reference Problems Points to be checked Measures (Remedy) pages No power supply Is the power plug loosened or Firmly insert the power plug. — disconnected? Is the main power turned off? Turn the main power on. 6 No picture with Is the signal cable disconnected? C
