Streszczenie treści zawartej na stronie nr. 8
▲ LifeBook N Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu allows you to configure secondary ATA devices. PhoenixBIOS Setup Utility Main Secondary Master [TOSHIBA DVD-ROM SD-R2412] Item Specific Help Type: [Auto] Select ATA/ATAPI drive installed here. Multi-Sector Transfers: [Disabled] LBA Mode Control: [Disabled] [Auto] Transfer Mode: [Standard] The BIOS auto-types the Ultra DMA Mode: [Disabled] drive on boot time. Except [Auto] You enter param
Streszczenie treści zawartej na stronie nr. 9
Main Menu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description ■ Maximum Display only –— Displays the maximum capacity of the drive calculated from the Capacity: parameters of the hard disk when Auto is selected and the type is identified as hard disk, or User is selected. ■ Multi-Sector Disabled [Disabled] This option cannot be changed when Auto is selected. Specify the ■ Transfers: number of sectors per block for mult
Streszczenie treści zawartej na stronie nr. 10
▲ ▲ ▲ ▲ ▲ ▲ ▲ LifeBook N Series Notebook BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the Setup Utility to make any changes. ■ Set the I/O addresses for the serial and parallel ports. (See Navigating Through The Setup Utility on page 2 for ■ Set the keyboard and mouse features. more information.) ■ Select between the display panel and an external CRT display. The following tables show the names of t
Streszczenie treści zawartej na stronie nr. 11
Advanced Menu Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Options Default Description USB Features ___ ___ When selected, opens the USB Features submenu to allow you to enable or disable the USB Floppy Disk Drive. Miscellaneous ___ ___ When selected, opens the Miscellaneous Configurations submenu to Configurations allow you to enable or disable the power button and the Wake Up On LAN feature. Event Logging –— –— When selected, opens the event logging submenu. 11
Streszczenie treści zawartej na stronie nr. 12
▲ LifeBook N Series Notebook BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for enabling or disabling the NumLock feature. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: Select power-on state [Off] for Numlock. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 5. Keyboard/Mouse Featu
Streszczenie treści zawartej na stronie nr. 13
▲ Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Internal Flat Panel] Select display terminal. Compensation: [Disabled] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 6. Video Features Submenu Table 6: Fields, Optio
Streszczenie treści zawartej na stronie nr. 14
▲ LifeBook N Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Device Configurations Item Specific Help [Disabled] IDE Controller: [Both] No IDE ports are Modem Controller: [Enabled] enabled. LAN Controller: [Enabled] Wireless LAN: [Enabled] [Primary] Only primary IDE port is enabled.
Streszczenie treści zawartej na stronie nr. 15
▲ Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu provides options for enabling or disabling the USB Floppy Disk Drive. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Disabled] [Disabled] Legacy USB Support: The feature is disabled. [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Selec
Streszczenie treści zawartej na stronie nr. 16
▲ LifeBook N Series Notebook BIOS Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature, and for enabling or disabling the system beep. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Miscellaneous Configurations Item Specific Help Configures the power Power Button: [Disabled] button. [Disabled] Wake up on LAN: System Beep: [Enab
Streszczenie treści zawartej na stronie nr. 17
▲ Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Mark Events as Read: [Ente
Streszczenie treści zawartej na stronie nr. 18
▲ ▲ ▲ LifeBook N Series Notebook BIOS SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security POINTS features of your notebook to fit your operating needs ■ and to view the current data security configuration. Entering a password incorrectly 3 times in a row will Follow the instructions for Navigating Through the cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. Setup Utility to make any changes.
Streszczenie treści zawartej na stronie nr. 19
Security Menu Table 11: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –— Clear A display-only field. Set is displayed when the system supervisor password Password is: is set and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Set Supervisor –— [Enter] Sets, changes or cancels the Supervisor Password. Supervisor’s Password Password may b
Streszczenie treści zawartej na stronie nr. 20
▲ LifeBook N Series Notebook BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Security Submenu is for configuring hard disk security features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Hard Disk Security Item Specific Help Primary Master: [Disabled] All items on this menu cannot be modified in user mode. If any items require changes, please consult your System Supervisor. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit
Streszczenie treści zawartej na stronie nr. 1
Fujitsu LifeBook
N Series
BIOS Guide
LifeBook N Series Models:
N3010
Document Date: 05/16/03
Document Part Number: FPC58-0922-01
FUJ I TSU PC C O RPO R A T IO N
1
Streszczenie treści zawartej na stronie nr. 2
LifeBook N Series Notebook BIOS 6. To go to the Exit menu from any other menu, N Series BIOS press the [Esc] key. BIOS SETUP UTILITY POINTS The BIOS Setup Utility is a program that sets up the ■ Selecting a field causes a help message about that operating environment for your notebook. Your BIOS field to be displayed on the right-hand side of the is set at the factory for normal operating conditions, screen. therefore there is no need to set or change the BIOS ■ environment to operate your
Streszczenie treści zawartej na stronie nr. 3
BIOS Setup Utility POINTS ■ If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshooting Section in the system User’s Guide. The Troubleshooting Section includes a list of error messages and their meanings. ■ If your data security settings require it, you may be asked for a password before the operating system will be opened. 3. If an error message is displayed on the screen, and you want to enter the setup utility, press t
Streszczenie treści zawartej na stronie nr. 4
▲ ▲▲ LifeBook N Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. gating Through The Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for POINT more information.) System Time and System Date can also be set from your operating system without
Streszczenie treści zawartej na stronie nr. 5
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Default Description ■ Floppy Disk A: Disabled [1.44/1.2 MB 3.5”] Allows you to select floppy disk drive type (nte that 1.2 MB 3.5” ■ references a 1024 byte/sector Japanese media format.) 1.44/1/2 MB 3.5” ■ Primary Master: Selects Primary The product Display the type of device on this ATA/ATAPI interface,
Streszczenie treści zawartej na stronie nr. 6
▲ LifeBook N Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA devices are installed. PhoenixBIOS Setup Utility Main Primary Master [HITACHI_DK23EA-40] Item Specific Help Select ATA/ATAPI drive Type: [Auto]] LBA Format installed here. Total Sectors: 78140160 [Auto] Maximum Capacity: 40008MB The BIOS auto-types the drive on boot time. Multi-Sector Transfers: [16 Sectors] LBA Mode Control: [Enabled] Transfer Mode:
Streszczenie treści zawartej na stronie nr. 7
Main Menu Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description ■ Heads: A number between –— This item is active only when Hard Disk is selected as type. You can 1 and 16 change the value by incrementing (pressing the [Spacebar]) or by typing in the number. ■ Sectors: A number between –— This item is active only when Hard Disk is selected as type. You can 0 and 63 change the value by incrementing (pressing the [Spacebar])
