Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Contents To select the recall type Handset display 2 (Key R setting) 13 To select dial mode 13 Installing DECT 121 3 To activate/deactivate key tones 13 To change the PIN 14 DECT 121 handset & base 5 To restore to default settings 14 DECT 121 keys 6 Troubleshooting 15 Using DECT 121 7 Environment & Safety 16 To answer a call 7 To end a call 7 To make an external call 7 To make an internal call 7 Hereby, Philips, declares that Predialling a number 7 this DECT 121X is in compliance To activate/dea
Resumo do conteúdo contido na página número 3
Handset Display Some symbols may not appear at the top of the display, according to the status of the phone. Note: On first use it may be necessary to wait for a few minutes of battery charge before seeing icons on the display. The symbols stand for: The handset is within reception range of the base station. When the symbol is blinking the handset is almost out of range. The symbol disappears if the handset is out of range. The phone is in program mode. The phone is in use. An internal call is i
Resumo do conteúdo contido na página número 4
Installing DECT 121 PLEASE CHARGE DECT 121 FOR 24 HOURS BEFORE USE. ONLY USE RECHARGEABLE BATTERIES. Unpacking your DECT 121 The DECT 121 package contains : One DECT 121 base station , One DECT 121 handset , 121 One user guide , one warranty leaflet . 2 rechargeable batteries, 1 line cord, 1 power supply If anything is missing, please contact your place of purchase immediately. (Note: in DECT 121 multi-handset packs, you will find one or more additional handsets, chargers with their
Resumo do conteúdo contido na página número 5
Installing your DECT 121 1. Plug the power supply & line cord into the base station. If you have a broadband DSL internet Installation, please make sure you have one DSL filter plugged directly on each line socket used in the house and check the modem and the phone are plugged in the correct filter slot (one specific for each) 2. Plug the power supply & line cord into the wall socket. Always use the cables provided in the box. 3. Slide open the battery compartment cover. 4. Place the 2 batteries
Resumo do conteúdo contido na página número 6
DECT 121 Handset & Base Earpiece Correction & Mute key Display Phonebook key Call log key Talk key Redial Key Recall & Program key Intercom key Numerical keypad Microphone Paging key The paging key lets you locate a missing handset. Press the key until the handset starts to ring. Once retrieved, press the Talk key on the handset. 5 DECT121(180105).pmd 5 02/02/2005, 22:44
Resumo do conteúdo contido na página número 7
DECT 121 Keys Handset keys Log key - Keep pressing to browse the Call Log. Redial key - Keep pressing to browse the redial list. Correction & Mute key: - Each press goes backward one space to delete a previous input ; - Return to idle mode ; - Press and hold to delete display numbers in call log, phonebook and redial list ; - Mute the microphone during a call. Phonebook key - Keep pressing to browse the list. Talk key - Press to answer, make & end a call. Press and hold to dial voice mailbox num
Resumo do conteúdo contido na página número 8
Using DECT 121 To answer a call Press the Talk key. To end a call Press the Talk key. To make an external call Press the Talk key. Dial the number. To make an internal call (DECT 121 multi-handset packs) Press and hold Rkey and press the handset number (1 to 4) until the other handset rings. Answer the call on the called handset. Predialling a number Dial the phone number. Press the Talk key. Note: You can dial up to 18 digits. Tip: Press the Correction key to delete incorrect digits. To activat
Resumo do conteúdo contido na página número 9
To store a number in the phonebook You can save 10 numbers in your phonebook. Press the Program key. Press the Phonebook key. A memory number shows on display. Keep pressing to choose another memory number. Enter the number. Press the Program key to save the number Tip: If you make a mistake, press the Correction key to amend. To make a call from the phonebook Press the Phonebook key. The first number in the phonebook shows on display. Keep pressing the Phonebook key until the desired phone numb
Resumo do conteúdo contido na página número 10
To delete the entire phonebook Press the Program key. Press 0. Press the Phonebook key. Press the Program key to confirm. To transfer a call to another handset (DECT 121 multi-handset packs) You can forward an external call to another handset. During a call : Press and hold R key and press the handset number (1 to 4). The other handset will ring. The call will be put on hold. Both internal parties can talk together. Press the Talk key to transfer the call. Or Press R again if there is no answer
Resumo do conteúdo contido na página número 11
To dial from the Call Log To use the call log function you must first subscribe to the Caller Display (Caller Line Identification or CLI) Service. Your DECT 121 stores the numbers of 10 unanswered calls. The symbol on the display reminds you of unanswered calls. Press the Call Log key. Display shows the latest entry. Keep pressing the key to scroll through the list of unanswered calls. Press the Talk key to make the call. OR Press the Correction key to exit the call log. Press and hold
Resumo do conteúdo contido na página número 12
To access voice mailbox Press the Program key. Press 1. Listen to the messages on your network voice mailbox. To program Baby Call With Baby Call you can save an emergency number that can be dialled by pressing ANY key (except the Program key). Press the Program key. Press 3 and then enter your 4-digit PIN code (Refer to P.14 for PIN setting). Press the Program key*. Enter the number you want to be the direct Baby Call number. If a saved number already exists you can edit it with the Correction
Resumo do conteúdo contido na página número 13
Setting Your Preferences To set the ring tone 6 types of ring tone are available: Press the Program key. Press 5. The current setting is displayed and played (1/6 for example). Enter your choice of ring tone 1, 2, ..., or 6. The selected ring tone is played Press the Program key to save the setting To set the ring tone volume 3 ring tone volumes are available: Press the Program key. Press 6. The current setting is displayed and played (1/3 for example). Enter your choice of volume 1(low), 2(medi
Resumo do conteúdo contido na página número 14
To select recall type (key R setting) The use of some services accessed with R+1, R+2 and R+3 (call waiting, call forward...) will depend on the flash setting (short/ long) according to your installation type (ISDN, Public, PABX). Press the Program key. Press R. Select 1, 2, ..., or 7. Press the Program key to save the setting. Several flash times are available: 1 = 80 ms ; 2 = 100 ms ; 3 = 120 ms ; 4 = 180 ms 5 = 250 ms ; 6 = 300 ms ; 7 = 600 ms Refer to your PABX user manual to set the flash t
Resumo do conteúdo contido na página número 15
To change the PIN The PIN is a 4-digit password. It protects the handset & base from misuse. The default PIN is 0000. Press the Program key. Press 1 and then enter the default/existing 4-digit PIN code. Press the Program key. Enter the new 4-digit PIN. Press the Program key. Enter again the new 4-digit PIN. Press the Program key to save PIN code. Warning: For all settings where you must enter the PIN code, if the PIN code you entered is wrong, a long beep is emitted and the phone returns to idle
Resumo do conteúdo contido na página número 16
Troubleshooting Please contact : www.philips.com/support PROBLEMS CAUSES SOLUTIONS No dialling tone when - The base station is not - Check the connections.(p 4). pressing . properly connected to electricity Reset the product by unplugging or to the telephone sockets. the power cord for few seconds and then by connecting it again - Too far from the base station - Move closer to the base - Battery pack is low (low - Charge the batteries for at least battery icon is dis
Resumo do conteúdo contido na página número 17
Environment & Safety Safety Information This equipment is not designed for making emergency calls when the power fails. An alternative has to be made available for making emergency calls. Power Requirements The product requires an electrical supply of 220-240V, alternating monophased power, excluding IT installations defined in standard EN 60-950. WARNING The electrical network is classified as hazardous according to criteria in the standard EN 60-950.The only way to power down the product is to
Resumo do conteúdo contido na página número 18
