Resumo do conteúdo contido na página número 1
®
®
EPSON PowerLite 7850p
Multimedia Projector
®
Macintosh Supplement
System Requirements
Installing the Software
Setting Up Your Macintosh
Connecting to the Projector
CPD-17267
Resumo do conteúdo contido na página número 2
EPSON is a registered trademark and EasyMP is a trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. © 2003 by Epson America, Inc. 10/03 2
Resumo do conteúdo contido na página número 3
Introduction Your EPSON PowerLite 7850p projector now lets you project ® ® wirelessly from an Apple Macintosh computer equipped with an note ® If you are using AirPort AirPort or AirPort Extreme (802.11b or 802.11g) wireless network Extreme, you must set the interface. This supplement includes the following: Wireless mode to 802.11b ® ■ System requirements for using the new wireless software only in the AirPort Admin Utility. See your AirPort ■ Software installation instructions document
Resumo do conteúdo contido na página número 4
Installing the Software 1. Insert the NS Connection for Macintosh software CD-ROM in your drive. If necessary, double-click the EPSON CD-ROM icon. 2. Double-click the EMP NS Connection.pkg icon. The following screen displays: 3. Click Continue. You see the software license agreement. 4. Click Continue, then Agree. 5. Select the destination drive, then click Continue. You see the following installation window: 6. Click Install. When installation is complete, close the installation window.
Resumo do conteúdo contido na página número 5
Setting Up Your Macintosh note Don’t set your projector to Before you begin, do the following: Channel ad hoc mode. This ■ Configure your projector for wireless projecting; see the User’s mode is not supported for Macintosh. Guide for instructions. ■ Insert the EPSON wireless (802.11b) card in the projector and ™ start EasyMP. See the User’s Guide for details. Follow these steps to set up your Macintosh for wireless projecting: 1. From the Apple pull-down menu, select System Preferences. T
Resumo do conteúdo contido na página número 6
5. For optimal performance, set your screen resolution to note 1024× 768 or lower with a color depth of thousands of colors. See your Apple documentation for instructions on setting up 6. Click the AirPort icon on the Application bar at the top of the your Macintosh. Macintosh desktop. You see a pull-down menu like this: note Use either ESSID ad hoc (computer-to-computer) mode 7. Check to make sure AirPort is turned on. or Access Point (infrastructure) mode when you set up your 8. Selec
Resumo do conteúdo contido na página número 7
You see a screen similar to the following: Select projector This box indicates projector status If the connection is working properly, you see your projector listed. If you have additional EPSON projectors on the network, they are also listed. The color of the status icon next to each projector’s name indicates its status: ■ Gray—The projector is not connected ■ Orange—The projector is connected to another computer ■ Green—The projector is connected to your computer 2. Select your projector
Resumo do conteúdo contido na página número 8
Once the connection is established, your computer’s desktop and note a floating control bar are projected: Position your pointer over a button for a description of its function. For more detailed descriptions, see the User’s Guide. 4. If necessary, drag the control bar out of the way, or minimize it. 5. When done with your presentation, click Disconnect on the control bar. Solving Connection Problems If you don’t see your projector in the EMP NS Connection window, try the following: ■ Mak
Resumo do conteúdo contido na página número 9
■ Make sure AirPort is turned on. Click the AirPort icon on the Application bar and select AirPort: On if necessary. If you don’t see the AirPort icon, follow the instructions beginning on page 5 to enable AirPort. ■ If possible, move your projector, Macintosh, and base station (if you’re using one) closer together. ■ If you’re using Access Point (infrastructure) mode and you’re connecting to the wrong network, you may be experiencing signal interference from another network. Open the Appl
Resumo do conteúdo contido na página número 10
Resumo do conteúdo contido na página número 11
Resumo do conteúdo contido na página número 12
