Manual do usuário Dakota Digital SERIES II STR4D

Manual para o dispositivo Dakota Digital SERIES II STR4D

Dispositivo: Dakota Digital SERIES II STR4D
Categoria: Acessórios para automóveis
Fabricante: Dakota Digital
Tamanho: 0.29 MB
Data de adição: 5/30/2014
Número de páginas: 20
Imprimir o manual

Baixar

Como usar?

Nosso objetivo é fornecer-lhe o mais rapidamente possível o acesso ao conteúdo contido no manual de instruções para Dakota Digital SERIES II STR4D. Usando a pré-visualização online, você pode visualizar rapidamente o índice e ir para a página onde você vai encontrar a solução para seu problema com Dakota Digital SERIES II STR4D.

Para sua conveniência

Se a consulta dos manuais Dakota Digital SERIES II STR4D diretamente no site não for conveniente para você, você tem duas soluções possíveis:

  • Visualização em tela cheia - Para visualizar facilmente o manual do usuário (sem baixá-lo para seu computador), você pode usar o modo de tela cheia. Para começar a visualização do manual Dakota Digital SERIES II STR4D no modo de tela cheia, use o botão Tela cheia.
  • Download para seu computador - você também pode baixar o manual Dakota Digital SERIES II STR4D em seu computador e mantê-lo em suas coleções. No entanto, se você não quer perder espaço no seu dispositivo, você sempre pode baixá-lo no futuro a partir de ManualsBase.
Dakota Digital SERIES II STR4D Manual de instruções - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Versão para impressão

Muitas pessoas preferem ler os documentos não na tela, mas na versão impressa. A opção de imprimir o manual também foi fornecida, você pode usá-la clicando na hiperligação acima - Imprimir o manual. Você não precisa imprimir o manual inteiro Dakota Digital SERIES II STR4D, apenas as páginas selecionadas. Respeite o papel.

Resumos

Abaixo você encontrará previews do conteúdo contido nas páginas subseqüentes do manual para Dakota Digital SERIES II STR4D. Se você deseja visualizar rapidamente o conteúdo das páginas subseqüentes, você pode usá-los.

Resumos do conteúdo
Resumo do conteúdo contido na página número 1



SERIES II




VACUUM FLUORESCENT DIGITAL DASHBOARD




The latest in digital dashboard technology for the
street rodder, car, and truck enthusiast.





INSTALLATION AND OPERATION MANUAL


Please read this before beginning installation or wiring.




MODELS STR3D, STR4D, STR5D, & STR6D






3421 W. Hovland Ave.
Sioux Falls, SD 57107
Phone: (605) 332-6513
FAX: (605) 339-4106

Resumo do conteúdo contido na página número 2

Thank you for purchasing the Vacuum Fluorescent Digital Dashboard from DAKOTA DIGITAL, the leader in custom automotive electronics. Representing the latest electronics dashboard technology for the street rodder, car, and truck enthusiast alike, the digital instrumentation uses state of the art vacuum fluorescent display technology to give the driver up to date and accurate information on the operation of his or her vehicle. As used in several production automobiles, vacuum fluorescent d

Resumo do conteúdo contido na página número 3

WARNING The vacuum fluorescent displays are made of glass and should be handled with care. Use extreme care around the glass evacuation tubes (small tubes at the bottom of each display) as bumping them may cause breakage and render the display useless. MOUNTING DISPLAY SYSTEMS WITH SUBPANELS When mounting instrumentation systems mounted to a Lexan subpanel, begin by removing the subpanel from the aluminum. Cut an opening in the dash just smaller than the outer dimensions of the

Resumo do conteúdo contido na página número 4

MOUNTING KITS INTO ORIGINAL DASHES When installing the display system into the original bezel, several steps must be taken to prepare the bezel. The first is to remove the cluster from the dashboard and all instrumentation from the bezel. You should essentially be left with a bare chrome or metal bezel. Remove all felt inserts from the back side of the bezel that sit between the lens and the chrome. 55-56 Chevy car chrome bezel shown with lens and display opening outlines. Next, tak

Resumo do conteúdo contido na página número 5

Wiring the control box into the vehicle. +12V Connect the +12V terminal to accessory power from the fuse panel or vehicle wiring harness. This terminal should have power when the key is on or in accessory position. In addition to powering the display system, this is also where the voltmeter gauge senses the vehicle electrical system voltage. Use 20 AWG or larger wire to ensure the system gets good power. Never connect this to a battery charger alone. It needs to have a 12 volt batt

Resumo do conteúdo contido na página número 6

SPEED The vehicle speed sensor (VSS) connects to this to tell the system how fast the vehicle is moving. For two wire speed sensors, like the one Dakota Digital supplies with this system, the polarity of the wires does not matter. Connect one wire to ground and the other to the speed terminal. The speed sensor ground wire should be brought back to the control box to ensure a proper signal is received. Twisting the ground and signal wires around each other provides an additional lev

Resumo do conteúdo contido na página número 7

A single wire should be run from the terminal on top of the water sender to the control box terminal marked WATER. If your wiring harness already has a wire routed through the vehicle for the water temperature then it may be used. Do not route the water sender wire along side a spark plug wire or other high current or high voltage wires. Doing so can cause incorrect or erratic gauge readings. If the water display shows “---“ this indicates that the control box is sensing a short to grou

Resumo do conteúdo contido na página número 8

A single wire should be run from the fuel sender to the control box terminal marked FUEL. If your wiring harness already has a wire routed through the vehicle for the fuel sender then it may be used. If using a wire from an existing harness, make sure that the wire does not have power. The fuel sender gets power from the control box only. Fuel senders get their ground from the sender mounting plate. Make sure that a ground wire is connected from one of the sender mounting bolts to the

Resumo do conteúdo contido na página número 9

BRAKE The BRAKE terminal can be used as a brake system warning indicator. The BRAKE input is activated by a ground signal from the brake pressure switch on the master cylinder or from the parking brake set switch. Connect a wire from this terminal to the pressure switch on the master cylinder or consult a vehicle service manual to determine color and location of an existing wire. Whenever the BRAKE input is grounded the system will flash a “b” to the right of the speedometer.

Resumo do conteúdo contido na página número 10

MPH/KPH The MPH/KPH terminal is activated by a 12 volt signal from a push button or toggle switch(not supplied). When the display system is in English mode (MPH & °F) by placing DIP programming switch #7 off, applying 12 volts to this terminal will convert the speed reading from MPH to KPH. The odometer will continue to accumulate miles correctly, but will display dashes. The bar speed display, if present, will not be affected. When the display system is in Metric mode (KPH & °C) by

Resumo do conteúdo contido na página número 11

Insert cable with red stripe to right side. Optional display power connector found on some systems. 11

Resumo do conteúdo contido na página número 12

Setting up the control box SPEEDOMETER CALIBRATION The speedometer calibration is done using the TRIP and RESET switches. There are two different ways to calibrate the speedometer. The first method control box uses an auto-cal mode where you drive one mile (1 km for metric) and the system automatically adjusts the speedometer calibration. The second method allows you to adjust the speedometer up or down as you drive. To enter the auto-calibration mode, begin with the key off. Pres

Resumo do conteúdo contido na página número 13

TACHOMETER DIP SWITCH SETTINGS The control box will work with 4, 6, 8, and 10 cylinder ignition systems. The DIP programming switches are located inside the control box, so the cover must be carefully removed to get access to the switches. Make sure the key is turned off before opening up the control box so that there is no power to the system. The switches numbers 5 and 6 select the number of engine cylinders. The settings are as follows: Engine cylinders Switch #5 Switch #6 Bar ta

Resumo do conteúdo contido na página número 14

GAUGE WARNING FEATURE The gauges have the built in feature to alert you when they are outside their normal operation range. The fuel display will flash whenever the fuel level is below 10% to indicate low fuel. The voltage gauge will flash whenever the system voltage is below 11.0 volts and the engine is running. The water gauge will flash whenever the temperature is higher than the water warning set point. The oil gauge will flash whenever the oil pressure is below the oil warning se

Resumo do conteúdo contido na página número 15

WIRE COLOR CODE FOR GM WIRING HARNESS On the connector that originally plugged into the instrument cluster: Function Color ------------------------------------------------------------------- +12 volt Pink/Black or Pink Ground Black Oil sender Tan or no wire if mechanical Water sender Dark green Fuel sender Pink or light brown (should not have power) Left turn Light blue Right turn Dark blue High beam Light green Brake warn Tan/

Resumo do conteúdo contido na página número 16

TROUBLESHOOTING GUIDE This is a list of some problems and their solutions which may be encountered when installing your instrumentation system. If you cannot determine what the problem is or how to solve it, please call our technical assistance line (605) 332-6513 or email to dakotasupport@dakotadigital.com. * A note on vehicle grounding. * The most common cause of problems with electric gauges is poor ground connections. The engine block has the highest ground currents of any poin

Resumo do conteúdo contido na página número 17

Symptom Possible Problem Solution ----------------------------------------------------------------------------------------------------------------------------------- The tachometer reading The tachometer signal wire is Check the connections at both is incorrect. loose or broken. ends of the wire. The control box is not set up for Refer to the Internal Adjustments the proper number of cylinders section of the installation manual or the proper tach range.

Resumo do conteúdo contido na página número 18

Symptom Possible Problem Solution ----------------------------------------------------------------------------------------------------------------------------------- The fuel display reads The control box may be set for Refer to “Fuel DIP switch settings” backwards, incorrectly, the wrong type of fuel sender. section of the installation manual or does not change. to ensure that the settings match your fuel sender. The fuel sender may not be Check th

Resumo do conteúdo contido na página número 19

Symptom Possible Problem Solution ----------------------------------------------------------------------------------------------------------------------------------- The gear shift indicator The optional gear shift sending Connect the sending unit to the does not light up. unit is not connected to the control box using the control box. instructions supplied with the sending unit. The gear shift indicator The gear shift sending unit Check the connection

Resumo do conteúdo contido na página número 20

CLOCK Wiring instructions for VFD systems with a clock built in. Introduction: The clock displays the current time in 12 hour format with an AM/PM indicator. The AM/PM indicator appears as a dot that will be displayed in the upper left corner. The dot will be on every other 12 hour period (on during AM and off during PM). The high brightness display matches our other Odyssey and STR series gauges and has the same night brightness dimming capability. Features included are: • Quartz


Manuais similares
# Manual do usuário Categoria Baixar
1 Dakota Digital 3X Manual de instruções Acessórios para automóveis 14
2 Dakota Digital DHC-2100 Manual de instruções Acessórios para automóveis 6
3 Dakota Digital DHC-2000 Manual de instruções Acessórios para automóveis 8
4 Dakota Digital LED Tail Light Flasher LAT-NLF Manual de instruções Acessórios para automóveis 3
5 Dakota Digital LED Tail Lights for 1956 Chevy Car LAT-NR200 Manual de instruções Acessórios para automóveis 2
6 Dakota Digital LAT-NR162 Manual de instruções Acessórios para automóveis 0
7 Dakota Digital LAT-NR271 Manual de instruções Acessórios para automóveis 0
8 Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne LAT-NR241 Manual de instruções Acessórios para automóveis 3
9 Dakota Digital LED Tail Lights for 1968 Chevelle LAT-NR180 Manual de instruções Acessórios para automóveis 1
10 Dakota Digital FFW-447 Manual de instruções Acessórios para automóveis 0
11 Dakota Digital LED Tail Lights for 1965 Nova LAT-NR130 Manual de instruções Acessórios para automóveis 0
12 Dakota Digital LED Tail Lights for 1955 Chevy Car LAT-NR190 Manual de instruções Acessórios para automóveis 0
13 Dakota Digital LED Tail Lights for 1968 Impala LAT-NR251 Manual de instruções Acessórios para automóveis 0
14 Dakota Digital LED Tail Lights for 1969 Firebird LAT-NR291 Manual de instruções Acessórios para automóveis 0
15 Dakota Digital LED Tail Lights for 1971 Bel Air LAT-NR390 Manual de instruções Acessórios para automóveis 0
16 Sony RM-X32 Manual de instruções Acessórios para automóveis 2
17 Sony MV-100CAR Manual de instruções Acessórios para automóveis 1
18 Sony DC-FX1 Manual de instruções Acessórios para automóveis 0
19 Sony RM-X33 Manual de instruções Acessórios para automóveis 13
20 Sony RM-X38 Manual de instruções Acessórios para automóveis 3