Manual do usuário Channel Vision -N

Resumo do conteúdo contido na página número 1

Resumo do conteúdo contido na página número 2

Section 1: Software Setup Follow Steps: Click on the "Start" menu and click "Run" 1.) Write the word "cmd" or "command" for Windows XP or Vista. Click OK.

Resumo do conteúdo contido na página número 3

Type in ipconfig /all This is similar to what you will get when you type in ipconfig

Resumo do conteúdo contido na página número 4

Copy this information from your ipconfig /all. (Example on previous page )

Resumo do conteúdo contido na página número 5

Section 2: Online Viewing. There are 2 ways to view this online. 1. Internet Explorer (or any browser that uses ActiveX Controls) 2. Software. (DVR Viewer 1.35, 1.45, 1.50, 1.75, 1.84, 1.99) 1.) To use Internet Explorer, use this address. Http://211.174.251.155 You will be prompted to install an ActiveX Control. Click install. Press "Spacebar" and your keyboard once ActiveX control is installed.

Resumo do conteúdo contido na página número 6

Enter IP Address, and Port number. Click Connect. When prompted for password, enter password. Factory Default is 8 ‘1s’ all in a row administrator password. for master (11111111) or 22222222 for a non- Shown is an internal IP. (192.168.1.122) The Port is 5401 You may also use an external IP, as long as your port is forwarded. For example, Channel Vision’s DVR display model is 68.165.38.221. It is an external IP Address.

Resumo do conteúdo contido na página número 7

Note: You can only view your cameras in Internet Explorer; you cannot search for events or change settings. IMPORTANT NOTE: You must contact your router’s Technical Support to find out how to forward your DVR’s IP to a certain port. If you do not, you can only view the DVR from your location.

Resumo do conteúdo contido na página número 8

2.) For Software: Follow steps below 1. Place DVR CD in CD-Rom Drive 2. Double click the My Computer Icon 3. Double click the CD-Rom Drive 4. Double Click Software

Resumo do conteúdo contido na página número 9

5. Double-Click Setup.exe 6. Install Software. The picture below is what the software looks like once installed. The software version is listed here

Resumo do conteúdo contido na página número 10

Section 3: Basic DVR configuration Press the menu button and the Quick Setup menu appears as the following picture. Turn Quick Setup on, by moving the Jog Dial. Quick Setup will configure your DVR to record when your camera sees motion. Change image size to 720x480, as 720x240 is a widescreen image. (Jog Dial) Make sure you hit "Escape" and "Save And Exit" to save settings.

Resumo do conteúdo contido na página número 11

Section 4 Basic Functions of DVR Search: 1.) On DVR Viewer. See Below. Select Event, and click ‘play’

Resumo do conteúdo contido na página número 12

2.) DVR Itself. See Below. (Copied from manual) The easiest way to search is by using ‘Search and Copy’ Select exact Date & Time. Click Status/Enter on front of DVR.

Resumo do conteúdo contido na página número 13