Manual do usuário Proficient Audio Systems 00P3DG090DSEB3

Resumo do conteúdo contido na página número 1

Proficient MPEG-4 DVR


User’s Manual



Version 2.3


00P3DG090DSEB3

Resumo do conteúdo contido na página número 2

DVR User’s Manual 1

Resumo do conteúdo contido na página número 3

DVR User’s Manual Caution and Preventive Tips • Switch the 115/230V selector to your local voltage standard • Handle with care, do not drop the unit • Mount the unit in an equipment rack or place it on a solid, stable surface. • Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site. • Do not place it in an area with poor ventilation or in an area close to fire or other sources of heat. Doing so may damage the unit as well as cause fire or an electric sho

Resumo do conteúdo contido na página número 4

DVR User’s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance. Rack Mounting Consult with the supplier or manufacturer of y

Resumo do conteúdo contido na página número 5

DVR User’s Manual Table of Content 1. Overview .......................................................................................................................7 2. System Setup................................................................................................................8 2.1 Position the Unit...................................................................................................8 2.2 Selecting Video Format...................................

Resumo do conteúdo contido na página número 6

DVR User’s Manual 4.3 Searching Recorded Video................................................................................28 4.3.1 Searching by Time................................................................................29 4.3.2 Searching by Event ..............................................................................29 4.4 Video Export ......................................................................................................30 4.4.1 ezBurn Introduction

Resumo do conteúdo contido na página número 7

DVR User’s Manual Appendix E: Remote Controller......................................................................................59 Appendix F: Setting up a DVR behind a Router............................................................61 6

Resumo do conteúdo contido na página número 8

DVR User’s Manual 1. Overview The Proficient MPEG-4 Series DVR is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding triplex operation enables users to view live or playback recorded video, remotely access through network simultaneously while recording other video, and to view wanted recorded video instantly by entering the time and date

Resumo do conteúdo contido na página número 9

DVR User’s Manual Human Technology: • ezBurn™ for quick video export • ezRecord™ for quick recording setting • ezDDNS™ for automatic DDNS configuration • IR Remote Control (Optional) • Compact Control Keyboard (Optional) Please refer to Appendix B: The Specification Table for more details about features of different models. 2. System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description t

Resumo do conteúdo contido na página número 10

DVR User’s Manual 2.3 Connecting Devices to the Unit This section lists some important notices that should be read before making any connection to the DVR series unit. Connecting Required Devices Before power up the unit, you should connect cameras and a main monitor to the unit for basic operation. If needed, connect a call monitor for displaying full screen video of all installed cameras in sequence. Connecting Short-term Device If you plan to install any short-term devices to

Resumo do conteúdo contido na página número 11

DVR User’s Manual Alarm I/O & RS485 4ch model The unit provides an alarm I/O and RS485 port that offers user the flexibility required to connect the unit to the other device. The definitions for pins varies when the DVRs have different channels. Refer to Setup 8ch/16ch models Guide for detailed pin definitions. LAN Connector (RJ-45) The DVR series unit is capable of networking. The LAN port opens the door of the DVR series unit to Ethernet where by the Internet. Power J

Resumo do conteúdo contido na página número 12

DVR User’s Manual 3. General System Setup Before you get started, some general configuration should be setup for the DVR series unit. The following subsections will introduce function keys on the front panel and guide you to setup the configuration of the unit. The regular displayed OSD information and its displayed positions are shown as following figure. The channel title will be displayed on the top-left side of the window, either in full screen mode or in multiple channel mode.

Resumo do conteúdo contido na página número 13

DVR User’s Manual 3.1.2 Function Keys This section describes the functional keys, which are for normal operation, on the front panel of the DVR series unit. Refer to the Setup Guide for the graphical illustration of functional keys. CHANNEL • In both Live and Playback modes, press the CHANNEL key to view the corresponding video in full screen. The number of the CHANNEL keys corresponds to the number of cameras supported by the unit. • In dome control mode, the key “1” is

Resumo do conteúdo contido na página número 14

DVR User’s Manual If the password protection has not been enabled, press ESC for five seconds to lock/ unlock the functions of these keys. NOTE: Please go to the menu to enable or disable the password protection. ZOOM/ENTER • In OSD menu or selection interface, press this key to make the selection or save settings. • In live full screen view mode, press this key to view a 2× zoom image; press it again to exit zoom mode. COPY In Playback mode, press COPY to select

Resumo do conteúdo contido na página número 15

DVR User’s Manual 3.2 Power Up / Down the Unit If you must shut down the DVR series unit for any reason, please use the proper shut down and power up procedures to avoid damaging your DVR unit. To Power Up the Unit Simply plug in the power adapter that came with the package and the DVR will start to boot. The color bar and system checking information will be shown on the monitor and then disappear when the unit has been completely powered up. To Restart / Shutdown the

Resumo do conteúdo contido na página número 16

DVR User’s Manual The default passwords are shown in the following table. The same passwords are used for entering the remote viewing software DynaRemote Lite. Administrator Password User Password 1 2 3 4 4 3 2 1 NOTE: It is strongly suggested to change the passwords to prevent unauthorized access to the unit. After entering the correct password, the Main menu is displayed. Main Menu 1. System Setup 2. Monitor Setup 3. Camera Setup 4. Record Setup 5. Sequence Setup 6. E

Resumo do conteúdo contido na página número 17

DVR User’s Manual 3.4.1 Set Date / Time Set Date / Time Select / and press ENTER for adjusting the settings. LEFT / RIGHT keys are used to move the cursor to previous or next field, ENTER is for selecting, and UP / DOWN are used to change the value in the selected field. NOTE: The new date / time setting applies to record new video. The date and time of previously recorded video will not be changed. NOTE: If you have to change time settings in any case, we

Resumo do conteúdo contido na página número 18

DVR User’s Manual 3.4.2 Daylight Saving Time Daylight Saving Time The item is for those people who live in certain regions to observe Daylight Saving Time. Select to enable, or to disable the function. If the function is disabled, the DST Start / End time and DST Bias will be grayed out and cannot be accessed. NOTE: If this function is enabled, the date/time information will be shown on the screen with a DST icon when playing back recorded video or searching video in

Resumo do conteúdo contido na página número 19

DVR User’s Manual 3.4.3 Network Time Protocol Setup Time Zone Select to enter the time zone. To find out your local time zone, please visit www.greenwichmeantime.com or refer to the following figure. NOTE: The must be set to your local time zone or the will not be accessible. Network Time Protocol Setup After entering the time zone, the option will appear. Select the

Resumo do conteúdo contido na página número 20

DVR User’s Manual 3.5 Record Schedule / Quality Setting The Record Setup menu allows user to set recording quality, recording schedules, and other recording parameters. Administrator's password is required to access Record Setup menu. In the Main menu, move the cursor to and press ENTER; the following menu is displayed. Record Setup 1. Record Mode 720×240@60PPS 2. Schedule Setup 3. Preset Config Standard 4. Per Camera Config. 5. ezRecord Setup 6. Data Lifeti