Manual do usuário Edelbrock 25-4068

Resumo do conteúdo contido na página número 1

EDELBROCK UPPER TRAILING ARMS
for 1978-1988 GM A/G Body (Catalog #5267)
1968-1972 GM A-Body (Catalog #5268)
1964-1967 GM A-Body & 1967-1978 American Motors Rebel,
Matador, Marlin, and Ambassador (Catalog #5269)
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Trailing Arms. If you have any questions, please
contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time
or e-mail us at Edelbrock@Edel

Resumo do conteúdo contido na página número 2

5. Remove the front trailing arm bolt. 4. Install new trailing arms with the grease fittings 6. If you are having difficulty removing the trailing facing down, locating the front bolt first (See arm bolts, then remove the lower shock bolts and Figure 4). Use heavy supplied 1/2 washer on this the rear springs to aid bolt removal. end. 7. Clean frame at trailing arm pivot area with a wire brush. 8. Remove the pressed-in factory rubber bushing from axle housing. Note direction of bushing in axle h