Resumo do conteúdo contido na página número 1
Grill Guide
Model # BQ04022
LP Gas Barbecue Grill
STOP!
Missing A Part? No Need To
Go Back To The Store!
The store where you made the purchase does not stock
parts for this item. If you need parts, whether they are
missing or damaged, please call Toll Free Help Line 1-800-933-0527
Call us between 8:30 AM and 5:00 PM Central Time, Monday through Friday.
FOR YOUR SAFETY:
1. Read this Grill Guide before attempting to assemble or o
Resumo do conteúdo contido na página número 2
Table of Contents Table of Contents……….……………………………..…………………………......2 Safety Precautions…………………….……………………………….…..…………3 Limited Warranty…………………….……………………………….………….…..4 Customer Support Center……………….…………………………….……………..4 Assembly Instructions...…………………………………………………………….5-17 General Information and Instructions………………..……………………………..18 -27 Trouble Shooting Guide………………………………………………....................27-28 Frequently Asked Questions…………………………………………….…………29 Write down here and keep for future
Resumo do conteúdo contido na página número 3
TO THE INSTALLER OR PERSON ASSEMBLING THIS GRILL: Leave this Grill Guide with the consumer. TO THE CONSUMER: Retain this Grill Guide for future reference. Safety Precautions Always read and follow all DANGER, WARNING, AND FOR YOUR SAFETY notices in this Grill Guide. Failure to follow these notices may result in property damage, bodily injury, or death. 1. Grill installation must conform with local codes, or in their absence, with either the National Fuel Gas Code, ANSI Z223.1/
Resumo do conteúdo contido na página número 4
Limited Warranty failure of the product and does not cover damage This barbecue is warranted to the original due to misuse, abuse, alteration, improper or consumer-purchaser that this product shall be failure to perform normal and routine free from defects in workmanship and materials maintenance, discoloration, accident, or damage for a period of 12 months under normal and arising out of transportation of the product. This reasonable use when assembled and operated limited war
Resumo do conteúdo contido na página número 5
Assembly Instructions This page will give you an overview of information to assemble your grill. The following pages will show in step-by-step detail how to do so. We offer the following suggestions to make your grill assembly as easy as possible. 1.) Read through the entire Assembly Instructions before you begin. 2.) Choose an area large enough to comfortably lay out all the parts and hardware with enough room to easily maneuver. 3.) Have an area with a non-abrasive surface whe
Resumo do conteúdo contido na página número 6
BQ04022 Detail Parts List 1. 32. Side Burner Inner Frame Thermometer 2. 33. Side Burner Grate Thermometer Seat 3. Name Plate 34. Side Burner Cover Support 4. Hood Exterior Panel 35. Side Burner Electrode 5. Hood Side Panel-Right 36. Side Burner Shelf Frame 6. Silicon Stopper for Hood 37. Side Burner 7. Hood Interior Panel 38. Side Burner Control Panel 8. Hood Side Panel-Left 39. Side Burner Valve 9. Hood Handle Assembly 40. Gas Hose 10. Burner Support Rail Ass
Resumo do conteúdo contido na página número 7
BQ04022 Detail Parts List 7
Resumo do conteúdo contido na página número 8
Part List 1. Cabinet Assembly…1PC 2. Hood & Firebox Assembly..1PC 3. Side Burner Assembly…1PC 4. Side Shelf Assembly...1PC 5. A. Locking Caster…2PCS 6. Cylinder Support Ring…1PC B. Standard Caster…2PCS 7. A. Cooking Grate-Small…1PC 8. Heat Diffusers…3PCS 9. Caster Caps…4PCS B. Cooking Grate-Large…1PC 12. Warming Rack…1PC 11. A. Manual Igniter …1PC 10. Condiment Basket…1PC B. Cabinet Crossbar…1PC Hardware List 1PC Philips
Resumo do conteúdo contido na página número 9
STEP 1 1-1 Insert Caster Caps (9) into the legs of the Cabinet Assembly (1). 1-2 Insert 2 Locking Casters (5.A) into 2 Caster Caps (9) in the front legs of Cabinet Assembly (1). 1-3 Insert 2 Standard Casters (5.B) into 2 Caster Caps (9) in the back legs of Cabinet Assembly (1). 1 9 9 5.A 9 5.A 5.B STEP 2 2-1 Use 4 Philips Head Bolts (B) and 4 Spring Washer (E) to attach Firebox Support (J) to Cabinet Assembly (1). 2-2 Use 2 Philips Head Bolts (C) and
Resumo do conteúdo contido na página número 10
STEP 3 3-1 Use 2 Philips Head Bolts M6 (K) to secure the Cylinder Support Ring (6) on the Right Side of the Cabinet. K 6 STEP 4 3-1 Loosen the 2 screws (B) on the front panel of Cabinet Assembly (1). Do not fully loose the screws. 3-2 Hang Condiment Basket (10) to the front panel of cabinet Assembly (1) as shown. 3-3 Tighten the 2 screws on the front panel of Cabinet Assembly (1). 1 10 10
Resumo do conteúdo contido na página número 11
STEP 5 5-1 Place Hood & Firebox Assembly (2) on Firebox Support (J), as shown. 2 J STEP 6 6-1 Place Side Burner Assembly (3) over the top of the left legs of Cabinet and Firebox assembly. 3 11
Resumo do conteúdo contido na página número 12
STEP 7 7-1 Attach the Side Burner (3) to the Cabinet and Firebox Assembly using 4 Philips Head Bolts (A) and 4 Spring washer (E) going from the inside of the Firebox and into the Side Burner Assembly as shown in Insert 1. Continue to attach the Side Burner Assembly (3) to Cabinet and Firebox Assembly using 4 Philips Head Bolts (B) and 4 Lock Washers (E) going from underneath the Side Burner Assembly and into the Cabinet legs. And then use 1 bolts (D) to attach the Side Burner to t
Resumo do conteúdo contido na página número 13
STEP 9 9-1 Insert Side Burner Valve into the Side Burner. The valve should be centered in the stem tube of the Side Burner. STEP 10 10-1 Insert valve stem up through the hole in the side burner front panel from the back side. Using 2 Philips Head Bolts (D) to secure the valve stem from two sides of the control knob seat. 10-2 Ensure the side burner valve is still centered in the stem tube of the side burner. If not, center, which may involve loosenin
Resumo do conteúdo contido na página número 14
STEP 11 11-1 Slide the side burner ignition wire over the side burner ignition connector as shown. STEP 12 12-1 Place the Heat Diffusers (8) inside the firebox. Ensure the long extension on the front of the Heat Diffusers (8) go into the appropriate holes at the front of the firebox. 8 14
Resumo do conteúdo contido na página número 15
STEP 13 13-1 Insert the Cooking grate (7.A & 7.B) into the Firebox. 7.A 7.B STEP 14 14-1 Insert Warming Rack (12) into the side walls of the firebox and hood as shown. The “L” shaped wire will insert into holes in the sides of the firebox, and the straight wire will insert into holes in the sides of the hood. 12 15
Resumo do conteúdo contido na página número 16
STEP 15 15-1 Insert the “S” Hooks (F) into the side of the Side Sh elf Assembly (4) as shown. The smaller end insert into the Side Shelf Assembly (4) and the larger end will support many Barbecue Tools and Utensils. 4 F STEP 16 16-1 Unscrew the electronic igniter top. Place “A” battery (H) into the electronic igniter with the Positive (+) end facing up. Screw the electronic igniter top back into place on the electronic igniter. H
Resumo do conteúdo contido na página número 17
STEP 17 17-1 Pull the cylinder support up to the top of the cabinet. 17-2 Place the LP cylinder down into the tank support hole in the bottom panel. Ensure the valve faces towards the left panel or front of the cabinet. 17-3 Unhook the LP Cylinder Support Ring as shown. 17-4 Lower the LP cylinder Support Ring over the top of the LP cylinder and wrap around the neck of the cylinder. Secure in place using same hook. ! Warning Do not attempt to hook up the LP cylinder
Resumo do conteúdo contido na página número 18
General Information and Instructions Your new Outdoor Gourmet™ Grill has been designed and manufactured to high quality standards. It will provide you with many years of enjoyment with a minimal amount of maintenance. Please keep in mind the following FOR YOUR SAFETY. OPERATION 1. Your gas grill requires reasonable care during operation. It will be hot during cooking and cleaning. You should never leave the grill unattended or move the grill when in use. 2. Children should never
Resumo do conteúdo contido na página número 19
LP CYLINDER FILLING AND EXCHANGE Some areas only allow you to exchange your empty cylinder for a replacement that is already full. Other areas allow you to refill your cylinder. If you are in an area where you can refill your cylinder: 1. Use only a licensed dealer. 2. The dealer must first purge the cylinder before filling. 3. Never fill a cylinder more than 80% full by volume. Volume will vary by temperature. An empty cylinder weighs approximately 18 pounds (8.2kgs). A full one ap
Resumo do conteúdo contido na página número 20
TRANSPORTATION AND STORAGE 1. Always use the Safety Cap when transporting or storing your cylinder. 2. Do not store in a building, garage, or other enclosed area. 3. Always store your cylinder outside. 4. Store out of reach of children. Dust Cap 5. Always transport in an upright position. 6. Do not smoke when transporting your cylinder. Regulator and LP Cylinder Connections ! CAUTION The gas pressure regulator provided
