Manual do usuário SkyLink INDOOR/OUTDOOR MOTION SENSOR HA-318T

Resumo do conteúdo contido na página número 1

Indoor/Outdoor
Motion Sensor Model HA-318T
1. INTRODUCTION
2. SET UP THE INDOOR/OUTDOOR MOTION SENSOR
The Indoor/Outdoor Motion Sensor is designed to
1. CODE CONNECTORS
2. ZONE CONNECTORS
monitor movement around your house. The motion
Clip
In order for the sensor to communicate with the receiver properly, the
Each receiver can work with up to 4 different sensors (to represent 4
sensor can be placed either indoor or outdoor.
sensor’s code must match with the receiver’s code. Code connectors 1
d

Resumo do conteúdo contido na página número 2

3. POWER UP THE INDOOR/OUTDOOR MOTION SENSOR (CONT) 4. OPERATION 7. FCC This device complies with Part 15 of the FCC Rules. Operation is subject 4. WALK TEST When motion is detected in the monitored area, the sensor will send a signal to the receiver. It to the following two conditions: (1) This device may not cause harmful After mounting the sensor at the desired location, will beep and the corresponding zone red LED will flash for 15 seconds. interference, and (2) This device must accept any i