Manual do usuário Edelbrock 3722

Resumo do conteúdo contido na página número 1

Performer-Plus 5.0L
Hydraulic Roller Lifter Camshaft only
®
CATALOG #3722
MODEL: 5.0 Litre Ford V8, 1985 & later
INSTRUCTIONS
• PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesitate to call our
Technical Hotline at: 1-800-416-8628.
� CAMSHAFT: Edelbrock Performer-Plus camshafts are ground specifically for use with the corresponding Performer manifold on engines operat-
ing between idle and 5500 rpm. The Performer 5.0

Resumo do conteúdo contido na página número 2

INSTRUCTIONS FOR ENGINE PARTS REMOVAL not recommended for this camshaft installation. Edelbrock Street � BEFORE CAMSHAFT INSTALLATION Legal Timing Sets feature a single keyway for accurate timing selec- � For ease of installation, keep all parts in some sort of order. tion. Use locking compound material on the bolt threads holding tim- WARNING: Do not remove radiator cap or radiator hose if engine is ing gear to cam. Torque to 35 ft./lbs. or factory recommendations. hot. Install camshaft with ti

Resumo do conteúdo contido na página número 3

4. Replace valve covers, carburetor linkage and remaining vacuum and Failure to install new Edelbrock Sure Seat Valve Springs with your electrical connections. new Performer-Plus cam could cause the cam lobes to wear exces- 5. Re-install air conditioner, if so equipped. sively and could cause additional engine damage. IF YOU HAVE ANY 6. Refill radiator with coolant and re-connect battery. QUESTIONS ABOUT THIS APPLICATION, PLEASE CONTACT OUR 7. Double check all connections, fuel lines, etc. befor

Resumo do conteúdo contido na página número 4

� FUEL LINE REMOVAL AND INSTALLATION (Optional; Do Not remove fuel lines unless necessary) CAUTION: Fuel system is under pressure. Pressure must be 5. To install fuel lines, install new O-rings on fuel lines. Use only released before servicing fuel system components. specified fuel resistant brown O-rings. Before installing, lightly coat 1. Remove fuel cap to release fuel tank pressure. Using EFI pressure O-rings with clean engine oil. Clean fittings and replace garter gauge (T80L-9974-B), relea

Resumo do conteúdo contido na página número 5

� CAMSHAFT: Performer-Plus 5.0L � CAMSHAFT: Performer-Plus 5.0L ® ® � CATALOG #3722 � CATALOG #3722 � ENGINE: Ford 5.0L V8, 1985 & later � ENGINE: Ford 5.0L V8, 1985 & later � RPM RANGE: idle-6000 � RPM RANGE: idle-6000 � CAUTION: Use only recommended stock or Edelbrock Sure � CAUTION: Use only recommended stock or Edelbrock Sure Seat Valve Springs #5822 or #5922 (for rotators). Seat Valve Springs #5822 or #5922 (for rotators). Duration at .004" Lift: Intake 282° Exhaust 282° Duration at .004" L