Manual do usuário Creek Audio Evolution 2

Resumo do conteúdo contido na página número 1

EVOLUTION 2
INTEGRATED AMPLIFIER
DESIGNED AND ENGINEERED
IN THE UNITED KINGDOM
OPERATING INSTRUCTIONS
Thank you for purchasing the Creek EVOLUTION 2. You are now in possession of a State of the Art
integrated amplifier. The functions and operation of the EVOLUTION 2 are very simple. However, the
following notes are provided to explain all aspects of its design and use.
MAINS CONNECTION
When unpacking the amplifier please keep the packing material in a safe place for possible future use. In
t

Resumo do conteúdo contido na página número 2

EVOLUTION 2 INTEGRATED AMPLIFIER OPERATING INSTRUCTIONS FRONT PANEL The front panel from left to right features a rotary selector knob, tape switch, display panel, volume control knob, headphone socket and on/off switch. REAR PANEL The rear panel from left to right features mains inlet, voltage selector switch, R & L speaker terminals, AV Direct/Power amp input, pre-amp and tape outputs, and tape, tuner, CD and aux/phono inputs. LOUDSPEAKER CONNECTIONS The loudspeakers should be connected usin

Resumo do conteúdo contido na página número 3

EVOLUTION 2 INTEGRATED AMPLIFIER OPERATING INSTRUCTIONS POWER CONSUMPTION It is appreciated by hi-fi enthusiasts that leaving equipment powered up continuously can improve the performance. However, this small improvement in sound quality comes at the expense of higher power consumption from the mains, which will cost more for your electricity and also reduced working life of the product. We recommend that if the equipment is not being used for a period of time, it would be better to switch i

Resumo do conteúdo contido na página número 4

EVOLUTION 2 INTEGRATED AMPLIFIER OPERATING INSTRUCTIONS SPECIFICATION POWER OUTPUT (both channels into 8W ) 80 Watts POWER OUTPUT (one channel into 8W ) 90 Watts POWER OUTPUT (one channel into 4W ) 145 Watts PEAK OUTPUT CURRENT INTO 1W > 10 Amps RMS TOTAL HARMONIC DISTORTION (20 Hz to 20 kHz) < 0.05% FREQUENCY RESPONSE 5 Hz to 50 kHz - 1 dB SLEW RATE > 25 V per m S GAIN x 52 INPUT SENSITIVITY - One channel driven/8W 480 mV line input PRE-AMP OUTPUT LEVEL Follo