Manual do usuário Edelbrock SBC Vortec 283-400 c.i.d. Chevy V8

Resumo do conteúdo contido na página número 1

SBC VORTEC THREE-DEUCE INTAKE MANIFOLD
For 283-400 c.i.d. Chevy V8 With
Vortec-Style Cylinder Heads
Catalog #5417
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a qualifie

Resumo do conteúdo contido na página número 2

• SPECIAL NOTE: This intake manifold is primarily intended for use with Vortec-style heads on pre-Vortec blocks. Standard engine blocks route the thermostat bypass water from the block directly to the water pump through the passenger side water pump mounting flange. If the manifold is used on a 1996 or later Vortec engine that does not have the in-block bypass passage, you must route a thermostat bypass hose from the water bypass port on the front of the intake manifold to the 5/8” hose nipple