Resumo do conteúdo contido na página número 1
AUTOMATED TILT MOUNTING SYSTEM
MANUAL FOR MODEL NUMBERS: TP150B AND TC105B
CLO SYSTEMS, LLC
1501 W. Cameron Ave., Suite 215, West Covina, California 91790
T (626) 939-4226 / F (626) 939-3378 WWW.CLOSYSTEMS.COM
1
Resumo do conteúdo contido na página número 2
CAUTION: When using this automated tilt mounting system, basic precautions should always be followed, including: • Follow the entire installation/user’s manual and the important safety instructions before attempting to install or use this mounting system. • Manufacturer is not liable for damage or injury caused by incorrect mounting, assembly, or use. • The maximum weight this mounting system can support varies depending on the model number. The model number for your mounting system is
Resumo do conteúdo contido na página número 3
5mm 13mm (3/16 in.) (1/2 in.) Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact the customer service number listed on the cover page 1. Never use damaged parts! OPT Hardware and procedures for multiple mounting configurations are included. When you see this symbol, choose the correct configuration to suit your needs. Not all hardware included will be used
Resumo do conteúdo contido na página número 4
[01] x 1 [02] x 1 [03] x 1 [04] x 1 [05] x 1 [06] x 1 [07] x 1 [09] x 1 [10] x 1 [11] x 1 [08] x 1 5/16 in. [12] x 6 [13] x 6 [14] x 6 M4 x 12 mm M5 x 12mm M6 x 12 mm M8 x 16 mm [15] x 4 [16] x 4 [17] x 4 [18] x 4 M4 x 30mm M5 x 30mm M6 x 35mm M8 x 40mm [19] x 4 [20] x 4 [21] x 4 [22] x 4 M4 M5 M6 M8 [23] x 4 [24] x 4 [25] x 4 [26] x 4 M4 / M5 M6 / M8 M6 / M8 M4 / M5 [27] x 4 [28] x 4 [29] x 8 [30] x 4 4
Resumo do conteúdo contido na página número 5
1.0 5 mm 3/16 in. 30.4 ~ 61.0 cm (12 ~ 24 in.) 6.35 cm (2.5 in.) [13] [12] 5
Resumo do conteúdo contido na página número 6
1.0. Wood Stud Wall Mounting Applications CAUTION: This product is not designed for use in metal stud walls. Do not over tighten the lag bolts [12]. Tighten the lag bolts only until they are firmly against the wall brackets [01]. Mount the wall bracket [01] to at least two (2) wooden studs spaced a minimum of 12 in. (30.4 cm) to a maximum of 24 in. (61.0 cm) apart. Do not mount this mounting system to wooden studs smaller than 2 in. x 4 in. (51.0 mm x 102.0 mm). The gypsum drywall, lat
Resumo do conteúdo contido na página número 7
1.1 13 mm 1/2 in. >46 cm (18 in.) >15 cm (6 in.) >15 cm (6 in.) >64 m m >30 cm (2.5 in.) (12 in.) [14] >30 cm (12 in.) >15 cm (6 in.) [14] [12] [13] 7
Resumo do conteúdo contido na página número 8
1.1. Solid Concrete Wall Mounting Applications CAUTION: Make sure concrete anchors [14] are seated flush with concrete surface. The gypsum drywall, lath, plaster, and the like covering may not exceed 1/2 in. (12.7 mm) thickness. CAUTION: Do not over tighten the lag bolts [12]. Tighten the lag bolts only until they are firmly against the wall brackets [01]. 8
Resumo do conteúdo contido na página número 9
2.0 <=800 mm (31.5 in.) TP150B [03] [02] [04] Digital optical audio output > 38.1 mm > 38.1 mm (1.5 in.) (1.5 in.) [15, 16, 17, 18] [23, 24, 25, 26] [29, 30] 9
Resumo do conteúdo contido na página número 10
2.0. Mounting TV with a flat back Note: The plastic cover (shown in dotted lines) is only provided on model number TP150B; but NOT on model number TC105B. The pin [04] is shipped pre-inserted into the “STORE” opening on the bracket [03]. Note: Most flat screen TVs are provided with Digital Optical Audio Output on the back of the TV. If your TV has one, locate the Digital Optical Audio Output – as this will be used later. Position the motorized bracket [02] and the non-motorized bracket [03] on
Resumo do conteúdo contido na página número 11
2.1 <=800 mm (31.5 in.) TP150B [03] [02] [04] Digital optical audio output > 38.1 mm > 38.1 mm (1.5 in.) (1.5 in.) [19, 20, 21, 22] [23, 24, 25, 26] [29, 30] [29] OPT [27, 28] 11
Resumo do conteúdo contido na página número 12
2.1. Mounting TV with a curved back or obstruction Note: The plastic cover (shown in dotted lines) is only provided on model number TP150B; but NOT on model number TC105B. Note: Most flat screen TVs are provided with Digital Optical Audio Output on the back of the TV. If your TV has one, locate the Digital Optical Audio Output – as this will be used later. Position the motorized bracket [02] and the non-motorized bracket [03] on the back of the TV so that the bottom of the two brackets [02] and
Resumo do conteúdo contido na página número 13
3.0 13
Resumo do conteúdo contido na página número 14
3.0. Hang TV onto the wall bracket You may need assistance with lifting the TV. Remove the two screws on the bottom of the two brackets [02] and [03], and save these screws as they will be used in the following steps. Hang the two brackets [02] and [03] to the wall bracket [01]. Reinsert and tighten the bottom two screws to anchor the motorized bracket [02] and the non-motorized bracket [03] to the wall bracket [01]. 14
Resumo do conteúdo contido na página número 15
4.0 [02] [03] [06] [08] [07] 15
Resumo do conteúdo contido na página número 16
4.0. Electrical Connections Note: Select the right electrical prong [09, 10, or 11] for your electrical socket. (1) Refer to Section 9.0 and manually tilt the TV up, and insert the pin [04] to the “UP” opening to hold the TV up for easier electrical connections. (2) Insert the AC adapter jack [06] into the control box, and plug in the electrical prong to electrical socket. (3) Insert the IR receiver jack [07] into the control box, and attach the head of the IR receiver [07] to the bottom of th
Resumo do conteúdo contido na página número 17
5.0 ~ 13 ~ 17
Resumo do conteúdo contido na página número 18
5.0. Adjusting the Tilt Note: Section 5.0 only applies to Model Number TP150B. For Model Number TC105B, skip this Section and go to the Section 7.0 (1) Use the down arrow button ( ) on the remote control [05] to fully tilt down the TV. Refer to Section 9.0. (2) The mounting system is design to tilt the TV down maximum of 13º. Note: the maximum tilt angle may vary depending on the application such as the support wall and the weight of the TV. (3) Visually check to see if the TV tilts do
Resumo do conteúdo contido na página número 19
6.0 [03] 19
Resumo do conteúdo contido na página número 20
6.0. Removing the spring to tilt the TV down fully Make sure the TV is in the upright position before proceeding with these steps! (1) If the TV is not in the upright position, then use the up arrow button ( ) on the remote control [05] to tilt up the TV. (2) Remove the two screws to take of the plastic cover off on the non-motorized bracket [03]. (3) Remove the screw holding the lever. (4) Lower the lever to take the spring off. (5) Return the lever to the original position. (6) Reinse
