Manual do usuário Lenmar Enterprises OmniSource BCR336

Resumo do conteúdo contido na página número 1

OPERATING INSTRUCTIONS
®
OmniSource 336 / Model BCR336
For Li-Ion, NiMH, NiCd & Lead Acid Batteries
INTRODUCTION
Thank you for purchasing LENMAR’s OmniSource 336. The model BCR336, will charge virtually all 3.6, 4.8, 6, 7.2, 9.6 or 10 Volt Li-Ion, NiMH, NiCd and
Lead Acid type rechargeable batteries. When recharging NiCd type batteries, the model BCR336 will operate as an AC/DC Battery Charger and Reconditioner
to help avoid developing memory in your battery.

This charger will opera

Resumo do conteúdo contido na página número 2

If the battery has End or Side contacts Open the hinged jaw on the charger to unlock the moveable contacts. Pull up on the charger contacts to raise them above the top deck of the charger and expose the side facing contacts. Set the battery to be charged on the deck of the charger and against the fence (marked “D”) with its contacts facing the charger’s contacts. For large batteries or in some circumstances, the “D” fence may need to be reversed or removed to make more room for the battery