Resumo do conteúdo contido na página número 1
Ranger
41
CODE
415A
(Wheeled Push)
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 415A001001 HANDBOOK: 415020 (REV .0.)
ISSUE 05.11.02
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
CONTENTS 1.2 Main Features/Specifications 1.19 - Throttle Cable Adjustment 1.19 - Carburettor Adjustments 1.3 Contents 1.20 - Oil Service 1.20 - Air Cleaner Service 1.4 Introduction 1.21 - Spark Plug Service 1.21 - Keeping Engine Clean 1.5 Warranty 1.21 - Grassbag 1.22 - Deck Housing 1.6 - 1.9 Safety Precautions 1.22 - Securing Nuts and Bolts 1.23 - Lubrication 1.9 Safety Symbols 1.23 - Cutterblade Removal 1.9 Decal Symbols 1.24 - Cutterblade Assembly 1.24 - Cutterblade Sharpening 1.10 Assemb
Resumo do conteúdo contido na página número 4
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
Resumo do conteúdo contido na página número 5
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full benefit of the warranty, the warranty registration card must be returned within 6
Resumo do conteúdo contido na página número 6
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ensure that you are familiar with the con
Resumo do conteúdo contido na página número 7
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confined space where exhaust fumes (carbon mo
Resumo do conteúdo contido na página número 8
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the mower. -
Resumo do conteúdo contido na página número 9
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cut- terblade
Resumo do conteúdo contido na página número 10
BRI GGS & STR ATTO N HARRIER 41 R ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Warranty Reg. Card. 3. Grassbag. To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Move the engine stop lever a
Resumo do conteúdo contido na página número 11
STARTING THE MOWER BEFORE Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’. Check Oil Level 0.15 Clean arou
Resumo do conteúdo contido na página número 12
OPERATING THE MOWER Controls Check that the engine stop lever returns freely to its rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move the throttle control lever to the ‘fast’ position before starting a warm engine. Step 2 Stand behind the mower and hold the handlebar together with th
Resumo do conteúdo contido na página número 13
Resumo do conteúdo contido na página número 14
OPERATING THE MOWER Before Mowing To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projectiles. Inspect the area for hidden obstruc- tions which when contacted by the cutterblade could risk health and safety. Remember the location of these obstructions and ensure that you mow around them. Grassbag Raise the rear deflector and lift the grassbag through the handlebar and lower the rear deflector to rest aga
Resumo do conteúdo contido na página número 15
OPERATING THE MOWER Friction Disc The cutterblade is driven by the engine via a friction disc to help pre- vent damage occurring to the engine crankshaft and cutting mecha- nism when a hidden obstruction or overload is encountered. Always stop the engine when a hidden obstruction or excessive vibra- tion is encountered. Disconnect the spark plug lead and examine the cutting mechanism. ALWAYS replace a damaged cutterblade - refer to “Maintenance”. Non-Grassed Areas When moving the mower across
Resumo do conteúdo contido na página número 16
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as
Resumo do conteúdo contido na página número 17
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
Resumo do conteúdo contido na página número 18
MAINTENANCE SCHEDULE After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. Daily Check the oil level Remove grass debris from around the engine, exhaust/exhaust guard and air ways in the top cowl and underside of the deck housing. Remove gras
Resumo do conteúdo contido na página número 19
Resumo do conteúdo contido na página número 20
MOWER MAINTENANCE Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine until the fuel tank is empty. 2. Remove the spark plug lead. 3. Allow the engine to cool. 4. Drain the oil while the engine i
