Manual do usuário Land Pride 65 Series

Resumo do conteúdo contido na página número 1

Shredder Kit
Manual No. 330-094M
For RC(M)5515 & RC(M)6515 Rotary Cutters
Further Assistance
Before You Start
Your dealer wants you to be satisfied with your new
When you see this symbol, the subsequent
Shredder Kit. If for any reason you do not understand any
instructions and warnings are serious - follow
part of this manual or are not satisfied with the service
!
without exception. Your life and the lives of
received, the following actions are suggested:
others depend on it!
1. Discuss the mat

Resumo do conteúdo contido na página número 2

Land Pride Shredder Assembly Instructions Right Wing Shredder Assembly Left Wing Shredder Assembly Refer to Figure 1: Refer to Figure 3: 1. Attach right wing shredder assembly (#1) to gearbox 1. Attach left wing shredder assembly (#3) to gearbox output shaft (A) with existing washer (D) and slotted output shaft (C) with existing washer (D) and slotted hex nut (E). Torqued slotted nut to 550 ft-lbs. hex nut (E). Torqued slotted nut to 550 ft-lbs. 2. Install cotter pin (F) in the slotted nut with

Resumo do conteúdo contido na página número 3

Land Pride Shredder Assembly Instructions 1. Replacing Blade Spacers Check blade deflection. If vertical deflection at the blade tip is greater than 3/4", remove blade bolt (#4) Refer to Figure 4: and reassemble using a thicker spacer (#1). Select The cutting blades should not have more than 3/4" free spacer thickness based on deflection. The greater vertical movement at the blade tips. If vertical movement the deflection, the thicker the spacer. exceeds 3/4", install or change to thicker spacer

Resumo do conteúdo contido na página número 4

Land Pride Listing of Parts Kit No. 330-094A RC(M)5515 & RC(M)6515 SHREDDER ASSEMBLY Item Item Qty Qty.. P Par art t No. No. P Pa ar rt t Description Description 1 330-094M SHREDDER KIT INSTALLATION MANUAL 1 1 330-091S CCW BLADES, SHREDDER 60" . . . . . . . . . . . . . . . . . . . . . . . . . . . (See Figure 1 on page 2) 2 1 330-092S CCW BLADES, SHREDDER 72" . . . . . . . . . . . . . . . . . . . . . . . . . . . (See Figure 2 on page 2) 3 1 330-093S CW BLADES, SHREDDER 60" . . . . . . . . . . . .