Manual do usuário Stiga 110 S

Resumo do conteúdo contido na página número 1

8211-3009-06

Resumo do conteúdo contido na página número 2

1. 2. F G H 3. 4.

Resumo do conteúdo contido na página número 3

GB ENGLISH 3. Slide in the attachment's fixing arms into the ma- SYMBOLS chine's attachment brackets. 4. Set the v-belt on the machine's central belt pulley The following symbols are displayed on the ma- F(fig3). chine in order to remind you about the safety pre- cautions and attention necessary when using the 5. The tension roller G should rest on the left-hand machine. side of the v-belt, seen from the driver's seat (fig 3). The symbols mean: 6. Now pull the mower deck forwards so that the hol

Resumo do conteúdo contido na página número 4

GB ENGLISH off the v-belt from the central belt pulley. MOWING HINTS 5. Change the damaged v-belt. Always use an orig- For the best effect follow this advice: inal v-belt. The tension roller G should rest to the - mow regularly left of the v-belt as seen from the driver's seat - use full throttle on the engine. (fig 3). - keep the underside of the mower deck clean. - use sharp blades. 6. Fit the screws K (fig 4). - do not mow wet grass. 7. Fit the mower deck in the machine's attachment brackets.

Resumo do conteúdo contido na página número 5

GB ENGLISH Always use original spare parts. Using non-original spare parts can result in the risk of damage even if they fit in the machine. When changing the blades, the blades central bolt should also be replaced. It is provided with a lock- ing device. The blade bolts torque: 65 Nm. SPARE PARTS STIGA original spare parts and accessories are constructed exclusively for STIGA machines. Note that non original spare parts and accessories have not been checked or approved by STIGA: Usage of such p