Manual do usuário Oregon Scientific Weather Station Advanced BAR628HG / BAR628HGU

Resumo do conteúdo contido na página número 1

INTRODUCTION
TM
Thank you for selecting the Oregon Scientific Weather
Station Advanced (BAR628HG / BAR628HGU). This
device bundles precise time keeping, weather forecast,
and indoor and outdoor temperature and humidity
monitoring features into a single tool you can use from
Weather Station Advanced
the convenience of your home.
Model: BAR628HG /
In this box, you will find:
BAR628HGU
• Main unit
User Manual
• Remote sensor (THGR122NX)
• Main unit batteries, 3 x UM-3 (AA) 1.5V
• Remote sensor bat

Resumo do conteúdo contido na página número 2

PRODUCT OVERVIEW FRONT VIEW 1. LCD display 2. and : Increase or decrease setting / activate or 1 deactivate RF Clock 2 3. MODE: Change display / settings 4. : View alarm status; set alarm 3 5. CHANNEL: Switch remote sensor 6. : Press to activate or deactivate alarm 4 5 6 BACK VIEW 1. SNOOZE button 1 2. Wall mount hole 2 3. Battery compartment (cover on) 4. Table stand 3 5. Battery compartment (cover off) 6. °C / °F switch 7. MEM: View current, maximum, and minimum temperature / humidity rea

Resumo do conteúdo contido na página número 3

LCD DISPLAY REMOTE SENSOR (THGR122NX) 1 A 2 1 3 2 B 4 5 6 7 C 8 9 10 11 12 13 D 14 15 1. LCD display A. Weather Forecast Area 2. LED status indicator B. Outdoor Temperature & Humidity Area C. Indoor Temperature & Humidity Area D. Clock / Alarm / Calendar Area 1. Weather display 2. Outdoor humidity 1 3. Sensor signal 4. Low battery icon for sensor 5. Outdoor temperature 6. Indoor humidity 7. Indoor icon 8. Low battery icon for main unit 2 9. Indoor temperature 3 10. Time 11. Radio Frequency (RF)

Resumo do conteúdo contido na página número 4

TABLE STAND OR WALL MOUNT GETTING STARTED Use the stand on the back of the main unit / remote BATTERIES sensor, or mount it on a wall with a nail. Batteries are supplied with this product: To attach the main unit stand: Main unit 3 x UM-3 (AA) 1.5V batteries Remote unit 2 x UM-4 (AAA) 1.5V batteries Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET afte

Resumo do conteúdo contido na página número 5

3. Set the channel. The switch is located in the battery SEARCH FOR SENSOR compartment. To search for a sensor, press and hold MEM and 4. Place the sensor near the main unit. Press RESET CHANNEL (on the main unit) for 2 seconds. on the sensor. Then, press and hold MEM and CHANNEL on the main unit to initiate signal sending NOTE If the sensor is still not found, check the batteries, between the sensor and the main unit. The reception obstructions, and remote unit location. icon on the main unit w

Resumo do conteúdo contido na página número 6

SWITCH CLOCK DISPLAY SELECT TEMPERATURE UNIT Press MODE to toggle between Clock with Seconds and Slide the °C / °F switch into the desired location. The Clock with Weekday display. switch is located in the main unit battery compartment. The setting for the main unit overrides the remote sensor setting. ALARM This product is equipped with a 2-minute crescendo SELECT CHANNEL NUMBER alarm. Press CHANNEL to switch between sensors 1-3. VIEW ALARM SETTINGS The icon shows the selected sensor. Press

Resumo do conteúdo contido na página número 7

RESET SYSTEM SPECIFICATIONS The RESET button is located in the main unit battery MAIN UNIT DIMENSIONS compartment. Press RESET when you change the L x W x H 116 x 55 x 127 mm batteries and whenever performance is not behaving as (4.6 x 2.2 x 5 inches) expected (for example, unable to establish radio frequency link with remote sensor or clock). Weight 186 g (6.6 ounces) without battery SAFETY AND CARE Clean the product with a slightly damp cloth and alcohol- REMOTE SENSOR DIMENSIONS free, mild de

Resumo do conteúdo contido na página número 8

Alarm Single alarm with 2-minute crescendo and 8-minute Snooze POWER Main unit batteries 3 x UM-3 (AA) 1.5V Sensor batteries 2 x UM-4 (AAA) 1.5V NOTE It is recommended that you use alkaline batteries with this product for longer performance. ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support

Resumo do conteúdo contido na página número 9

© 2007 Oregon Scientific. All rights reserved. P/N: 086L003567-069 9 EN

Resumo do conteúdo contido na página número 10

Weather Station Advanced Model: BAR628HG / BAR628HGU User Manual 10 EN