Resumo do conteúdo contido na página número 1
QUANTUM Series GX3500S
25 Watt VHF/FM
ITU Class D DSC Marine Transceiver
Owner's Manual
Oversized alphanumeric LCD, knobs and keys
30 W Loud Hailer with listen back and 4 fog horns, Bells & Whistles
Direct keypad entry of a channel using the keypad
Removable ClearVoice speaker microphone with 16/9 key and channel
selection
Display shows channel names, and repeats GPS information
Capable of connecting 2 optional enhanced RAM+ second station re-
mote microphones
DSC distress call
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS 1 GENERAL INFORMATION ...................................................................................... 4 2 PACKING LIST ........................................................................................................ 4 3 OPTIONS ................................................................................................................. 4 4 SAFETY / WARNING INFORMATION...................................................................... 5 5 FCC RADIO LICENSE
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS 11.3 DSC DISTRESS CALL ................................................................................. 38 11.3.1 Tansmitting a DSC Distress Call ........................................................ 38 11.3.2 Receiving a DSC Distress Call .......................................................... 40 11.4 ALL SHIPS CALL ......................................................................................... 40 11.4.1 Transmitting an All Ships Call ..........
Resumo do conteúdo contido na página número 4
1 GENERAL INFORMATION The Vertex Standard GX3500S is a VHF/FM transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. The GX3500S can be oper- ated from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25 watts. The GX3500S is capable of DSC (Digital Selective Calling) Class D operation and an Enhanced second station RAM+ mic (CMP25 remote-control speaker/ microphone with display). Class D operation allows continous receiving of Digi- tal Selective Calling f
Resumo do conteúdo contido na página número 5
4 SAFETY / WARNING INFORMATION This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation dis- tance of 0.6 m (2 feet). Failure to observe these restrictions will result in exceeding the FCC RF expo- sure limits. Antenna Installation: The antenna must be located at least 0.6 m (2 feet) away from passengers in order to comply w
Resumo do conteúdo contido na página número 6
5 FCC RADIO LICENSE INFORMATION Vertex Standard radios comply with the Federal Communication Commission (FCC) requirements that regulate the Maritime Radio Service. STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters (except Hawaii) which is under 20 meters in length. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal is required to have
Resumo do conteúdo contido na página número 7
6 FCC NOTICE NOTICE Unauthorized changes or modifications to this equipment may void com- pliance with FCC Rules. Any change or modification must be approved in writing by Marine Division of Vertex Standard. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, us
Resumo do conteúdo contido na página número 8
7 GETTING STARTED 7.1 ABOUT VHF RADIO The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with some shore stations available between 161 and 163 MHz. The ma- rine VHF band provides communications over distances that are essentially “line of sight” (VHF signals do not travel well through objects such as buildings, hills or trees). Actual transmission range depends much more on antenna type, gain and height than on the power output of the transmitter. On a fixed mount 2
Resumo do conteúdo contido na página número 9
7.3 COAXIAL CABLE VHF antennas are connected to the transceiver by means of a coaxial cable – a shielded transmission line. Coaxial cable is specified by it’s diameter and construction. For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. For runs over 20 feet but less than 50 feet, the larger RG-8X or RG-213/U should be used for cable runs over 50 feet RG-8X should be used. For installa- tion of the connector onto the coaxial cable refer to the figure below. Adapte
Resumo do conteúdo contido na página número 10
8 INSTALLATION 8.1 LOCATION The radio can be mounted at any angle. Choose a mounting location that: • is far enough from any compass to avoid any deviation in compass read- ing due to the speaker magnet • provides accessibility to the front panel controls • allows connection to a power source and an antenna • has nearby space for installation of a microphone hanger • the antenna must be mounted at least 3 feet from radio Note: To insure the radio does not affect the compass or radios performan
Resumo do conteúdo contido na página número 11
2. Connect the red power wire to a 13.8 VDC ±20% power source. Connect the black power wire to a negative ground. 3. If an optional remote extension speaker is to be used, refer to next section for connections. 4. It is advisable to have a Certified Marine Technician check the power output and the standing wave ratio of the antenna after installation. 8.3 ACCESSORY CABLE White: External speaker (+) Shield: External speaker (–) Red: PA speaker (+) Shield: PA speaker (–) Blue: NMEA IN (+) from GP
Resumo do conteúdo contido na página número 12
8.4 CONNECTION OF GPS WITH NMEA OUTPUT Manufacturer/Model Wires GX3500S Manufacturer/Model Wires GX3500S Green Green Lowrance Portable Orange Blue STANDARD HORIZON Blue Gray Black (GND) Green Brown Blue Magellan Fixed Mount Gray Blue Furuno GP30, 36 White Blue Black (GND) Green Blue Green Magellan Portable Orange Blue Furuno GP1650, 1850 White Blue Black (GND) Green Black Green Northstar Yellow Blue Garmin Fixed Mounts Blue Blue Black (GND) Green Black (GND) Green Raytheon 420 Yellow Blue Garmi
Resumo do conteúdo contido na página número 13
8.6 CHANGING THE GPS TIME From the Factory the GX3500S shows GPS satellite time or UTC time. A time offset is needed to show the local time in your area. [ ( )] 1. Press and hold down the CALL MENU key until “Radio Setup” menu appears. [ ] 2. Press the ENT key, then select “Time Set” with the CHANNEL selector knob. [ ] 3. Press the ENT key. 4. Turn the CHANNEL selector knob to select time off- set from UTC. See illustration below to find your off- set time from UTC. If “0:00” is assigned, the t
Resumo do conteúdo contido na página número 14
8.7 CHANGING THE TIME LOCATION You may select the time display between local time and UTC (time GPS sends to radio). Time is displayed when GPS position (LAT/LON) is displayed by press- ing the [F] key followed by the [6(NAV)] key. [ ( )] 1. Press and hold down the CALL MENU key until “Radio Setup” menu appears. [ ] 2. Press the ENT key, then select “Time Disp” in the “Radio Setup” menu with the CHANNEL selector knob. [ ] 3. Press the ENT key. 4. Turn the CHANNEL selector knob to select “UTC” o
Resumo do conteúdo contido na página número 15
8.8 CHANGING COG TO TRUE OR MAGNETIC Allows customizing the NAV data showing GPS Course Over Ground (COG). Factory default is True however following the steps below the COG can be changed to Magnetic. [ ( )] 1. Press and hold down the CALL MENU key until “Radio Setup” menu appears. [ ] 2. Press the ENT key, then select “Magnetic” with the CHANNEL selector knob. [ ] 3. Press the ENT key. 4. Turn the CHANNEL selector knob to select “On” (rep- resenting “Magnetic”) or “Off” (representing “True”).
Resumo do conteúdo contido na página número 16
8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION 1. To assist in flush mounting, a template has been included. Use this tem- plate to find the mounting location. 2. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accom- modate the transceiver (at least 6 inches or 15 cm deep). There should be at least 1/2 inch (1.3 cm) between the transceiver’s heatsink and any wiring, cables or structures. 3. Cut out the re
Resumo do conteúdo contido na página número 17
8.10 OPTIONAL ENHANCED RAM+ SECOND STATION MIC INSTALLATION The GX3500S is capable of using up to 2 Enhanced RAM+ mics to remotely control the Radio, DSC and PA/Fog functions. In addition the GX3500S can operate as a full function intercom system. With 2 RAM+ mics connected the GX3500S or RAM+ mics can selective call each station individually or all at one time. 1. Connect the RAM+ MIC Cable to the RAM MIC CONNECTOR on the rear panel, then tighten the Cable Nut (See Figure 3). 2. Referring to F
Resumo do conteúdo contido na página número 18
9 CONTROLS AND INDICATORS NOTE This section defines each control of the transceiver. See Figure 4 for location of controls. For detailed operating instructions refer to section “10 BASIC OPERATION.” ( ) VOLUME CONTROL VOL Adjusting this control clockwise, increases the audio volume level. ( ) SQUELCH CONTROL SQL Adjusting this control clockwise, sets the point at which random noise on the channel does not activate the audio circuits but a received signal does. This point is called the squelch t
Resumo do conteúdo contido na página número 19
-/* JKL DISTRESS PULL OPEN Figure 4. Controls and Connectors GX3500S Page 19
Resumo do conteúdo contido na página número 20
[PWR] Key Turns the transceiver on and off. To turn the transceiver on, press and hold this key until the LCD turns on. To turn it off, press and hold this key until the LCD turns off. When the power is turned on, the transceiver is set to the last selected channel. CHANNEL SELECTOR KNOB Rotary knob used to select channels and to choose menu items (such as the [ ( )] DSC menu, radio setup menu, and DSC setup menu). The UP / [ ( )] DOWN keys on the microphone can also be used to select channels
