Manual do usuário GE GM-1

Resumo do conteúdo contido na página número 1

instructions
Gradient Mixer GM-1
stirrer blade (6) lifts the liquid entering the mixing reservoir.
1. Introduction
The motor unit is supplied for operation from 100–120 or
The Gradient Mixer GM-1 (120 V, Code No. 19-0495-01,
220–240 V AC, 50 or 60 Hz.
230 V Code No. 19-0485-01) consists of two identical
reservoirs mounted on a base plate; connection between the
THE STIRRER BLADE (6) is secured to the motor axle by a
reservoirs is made via a valve. Mounted above the mixing
nylon screw (5). It

Resumo do conteúdo contido na página número 2

Dismantling the Gradient Mixer the stirrer blade but not the motor unit, may be autoclaved The reservoir cylinders (7), control valve (12) and flow at 121 °C for 20 min. control valve (18) may be removed from the base plate by Caution! unscrewing them. To remove the stirrer blade (6) from the Do not autoclave the motor unit or drain the motor in motor unit (1, 2), unscrew the nylon screw (5) a few turns. strong detergents. It is not necessary to remove the screw completely. The lid of the motor

Resumo do conteúdo contido na página número 3

The figure indicates the correct locations of the different 9. Spare parts parts of the Gradient Mixer. For replacements please order Caution! according to the spare part list below using the appropriate Only spare parts approved or supplied by code number. GE Healthcare Bio-Sciences AB may be used for maintaining and servicing of Gradient Mixer GM-1. DetaiI No. Designation Code No. Material No. per pack 1 Motor unit (complete with 18-1121-66 A* 1 detail Nos. 3, 4, 5) 110 V 2 Motor unit (comp

Resumo do conteúdo contido na página número 4

10. Important user information Meaning: Warranty and liability Consult the instruction manual to avoid personal injury or GE Healthcare Bio-Sciences AB guarantees that the product damage to the product or other equipment. delivered has been thoroughly tested to ensure that it meets its published specifications. The warranty included in the Warning! conditions of delivery is valid only if the products has been The Warning sign is used to call attention to the necessity to installed and used accor