Resumo do conteúdo contido na página número 1
ADSL Modem
HM210dp/di
User Guide
Resumo do conteúdo contido na página número 2
ADSL Modem HM210dp/di User Guide . Copyright Ericsson AB – 2003 All Rights Reserved Disclaimer The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Ericsson shall have no liability for any error or damages of any kind resulting from the use of this document. Abstract This User guide describes how to install and set up the Ericsson ADSL Modem HM210dp/di in a Windows environment, and how to cust
Resumo do conteúdo contido na página número 3
Contents Contents 1 Introduction 1 1.1 About this User Guide 1 1.2 About the ADSL Modem HM210d 1 1.2.1 Features 1 2 Hardware Description and Installation 2 2.1 Before You Start 2 2.1.1 Package Contents 2 2.1.2 Subscription for ADSL Service 2 2.1.3 System Requirements 2 2.2 Physical Appearance 3 2.2.1 Front Panel and LED Indicators 3 2.2.2 Back Panel and Connectors 4 2.3 Choosing a Place for the Router 4 2.4 Connecting the Hardware 5 3 Local PC Configuration 6 3.1 Configuring PCs
Resumo do conteúdo contido na página número 4
Contents 4.3 The Home Page and System View Table 13 4.4 Commiting Changes and Rebooting 15 4.4.1 Rebooting the HM210dp/di using Options 16 4.5 Quick Configuration 18 5 Basic Configuration 21 5.1 Configuring the ATM Virtual Circuit 21 5.1.1 Adding ATM VCs 21 5.1.2 Modifying ATM VCs 23 5.2 Configuring PPP Interfaces 24 5.2.1 Adding PPP Interfaces 24 5.2.2 Checking Your Connection Status 27 5.2.3 Modifying and Deleteing PPP Interfaces 28 5.3 Configuring EoA Interfaces 29 5.3.1 Adding
Resumo do conteúdo contido na página número 5
Contents 7.3.2 Enabling DHCP Server Mode 46 7.3.3 Configuring Your PCs as DHCP Clients 47 7.3.4 Viewing, Modifying and Deleting Address Pools 47 7.3.5 Excluding IP Addresses from a Pool 48 7.3.6 Viewing Current DHCP Address Assignments 48 7.4 Configuring DHCP Relay 49 7.4.1 Defining the DHCP Relay Interface(s) 49 7.4.2 Enabling DHCP Relay Mode 50 7.4.3 Configuring Your PCs as DHCP Clients 51 8 Configuring NAT 52 8.1 Overview of NAT 52 8.2 Viewing NAT Configuration 53 8.3 Viewing NA
Resumo do conteúdo contido na página número 6
Contents 11 Configuring Firewall Settings 78 11.1 Global Firewall Settings 78 11.2 Configuring IP Filters 80 11.2.1 Viewing Your IP Filter Configuration 81 11.2.2 Configuring IP Filter Global Settings 82 11.2.3 Creating IP Filter Rules 82 11.2.4 Viewing IP Filter Statistics 88 11.2.5 Managing Current IP Filter Sessions 89 11.3 Blocking Specific Protocols 90 12 Administration Tasks 93 12.1 Changing the System Date and Time 93 12.2 Configuring User Names and Passwords 94 12.3 Upgradin
Resumo do conteúdo contido na página número 7
Contents 15.2.1 License 110 15.2.2 Term 110 15.2.3 Limited Warranty 110 15.2.4 Intended Use 111 15.2.5 Limitation of Liability 111 15.2.6 Governing Law 111 15.3 Regulatory Information 112 15.3.1 EU Directives 112 15.3.2 Safety Approvals 112 15.3.3 EMC Approvals 113 15.3.4 Telecom Approval 115 15.3.5 Caution 116 15.3.6 Power Supply 116 15.3.7 Environmental Information 116 15.3.8 Intended Use 117 16 Glossary 118 EN/LZT 108 6492 R2 - October 2003 vii
Resumo do conteúdo contido na página número 8
Resumo do conteúdo contido na página número 9
Introduction 1 Introduction Congratulations on becoming the owner of an Ericsson ADSL Modem HM210dp/di. Your LAN (Local Area Network) will now be able to access the Internet using your high-speed ADSL connection. 1.1 About this User Guide This User Guide describes how to install and setup your HM210dp/di in a Windows environment, and how to customize its configuration to get the most out of your new product. The Glossary includes abbreviations and explanations to technical terms used
Resumo do conteúdo contido na página número 10
Hardware Description and Installation 2 Hardware Description and Installation This chapter describes the product and provides instructions about how to install the HM210dp/di in a PC/Windows environment. 2.1 Before You Start 2.1.1 Package Contents Check the contents of the package against the shipping contents checklist below. If any of the items is missing, please contact the ADSL modem provider. The ADSL Modem HM210dp/di A Power Supply Adapter with connecting cable ADSL Line Cabl
Resumo do conteúdo contido na página número 11
Hardware Description and Installation An Ethernet hub/switch if you are connecting the device to more than one computer. For system configuration using the built-in Configuration Manager program you need a web browser such as Internet Explorer v5.0 or later, or Netscape v5.0 or later. 2.2 Physical Appearance 2.2.1 Front Panel and LED Indicators The front panel of the HM210dp/di contains five control lamps (LEDs) that indicate the status of the modem. A general description of each LED
Resumo do conteúdo contido na página número 12
Hardware Description and Installation 2.2.2 Back Panel and Connectors The following figure illustrates the back panel of your HM210dp/di: Figure 2 - Back Panel of the HM210dp/di Description of connectors and buttons: DSL – The DSL port is used for connecting the HM210dp/di to the ADSL service port (splitter/filter or phone outlet) using the supplied ADSL line cable (RJ11 – RJ11). LAN – The LAN port (Ethernet 10/100 BaseT) connect the HM210dp/di to your PC’s Ethernet port, or to the
Resumo do conteúdo contido na página número 13
Hardware Description and Installation 2.4 Connecting the Hardware Follow the procedures below to connect related devices. NOTE! Before you begin, turn the power off for all devices. These include your computer(s), your LAN hub/switch (if applicable), and the HM210dp/di. 1. Connect to the ADSL Line Connect one end of the provided ADSL Line cable to the port labeled DSL on the back panel of the HM210dp/di. Connect the other end to your ADSL service port (splitter/filter or phone outlet).
Resumo do conteúdo contido na página número 14
Local PC Configuration 3 Local PC Configuration By default, the HM210dp/di acts as a DHCP server that automatically assigns all required Internet settings to your PCs, i.e. the DHCP clients. The predefined IP address and DHCP range is as below: LAN Port IP Address 192.168.1.1 Subnet Mask 255.255.255.0 DHCP Range 192.168.1.3 – 192.168.1.34 The following instructions assume that your PC meets the following prerequisites: 1. Already is connected to the LAN port on the HM210dp/di through i
Resumo do conteúdo contido na página número 15
Local PC Configuration 5. Some configuration files may be copied to your hard disk and if a “Settings Changes” message asks you to restart your PC, you should answer Yes. 3.1.2 In Windows 2000: 1. From the Start menu select Settings > Control Panel and double- click on the Network and Dial-up Connections icon. 2. Double-click on the Local Area Connection icon for the HM310dp. Be sure to choose the correct one if you have several dial-up icons. 3. Click the Properties button. 4. Select
Resumo do conteúdo contido na página número 16
Local PC Configuration 3.2 Assigning Static IP Addresses to your PCs In some cases, you may want to assign static IP information to your PCs directly if: In bridged mode, you have completed the initial configuration and you need to use the IP address and default gateway given by your ISP. You have obtained one or more public IP addresses that you want to always associate with specific computers (for example, if you are using a computer as a public web server). You maintain different
Resumo do conteúdo contido na página número 17
Local PC Configuration 3.2.2 In Windows 2000: 1. From the Start menu select Settings > Control Panel and double- click on the Network and Dial-up Connections icon. 2. Double-click on the Local Area Connection icon for the HM310dp. Be sure to choose the correct one if you have several dial-up icons. 3. Click the Properties button. 4. Select the Internet Protocol (TCP/IP) and click the Properties button. 5. Select “Specify an IP address” and enter the IP settings provided by your ISP/ser
Resumo do conteúdo contido na página número 18
Getting Started with the Configuration Manager 4 Getting Started with the Configuration Manager Your HM210dp/di includes a web-based Configuration Manager, which enables you to configure the device settings to meet the needs of your network. 4.1 Accessing the Configuration Manager You can access the Configuration Manager from any computer connected to the HM210dp/di. Follow the instructions below: 1. At any PC connected to the HM210dp/di, open a web browser, type the following URL in t
Resumo do conteúdo contido na página número 19
Getting Started with the Configuration Manager 4.2 Functional Layout The Configuration Manager tasks are grouped into categories, which you can access by clicking the tabs at the top of each page. Each tab displays the available tasks in a horizontal menu at the top of the page. You can click on these menu items to display the specific configuration options. Tab Task bar A separate page displays for each task in the task bar. The left-most task displays by default when you click
Resumo do conteúdo contido na página número 20
Getting Started with the Configuration Manager 4.2.1 Commonly Used Buttons and Icons The table below describes buttons and icons commonly used in the Configuration Manager. Button / Symbol Description Stores in temporary system memory any changes you have made on the current page. See section 4.4 “Committing Changes and Rebooting” for instructions on how to store changes permanently. Redisplays the current page with updated statistics or settings. When accumulated statistics are d
