Resumo do conteúdo contido na página número 1
Copyboard with Memory Function
- -
M 11S/M 11W/M-115
User’s Manual
Thank you for your purchase of the PLUS Copyboard.
Please read this User’s Manual carefully before use to take full advan-
tage of the functions of this product. After you have finished reading the
manual, please keep it for future reference.
Resumo do conteúdo contido na página número 2
The descriptions in this manual are for the M-11S, M-11W and M-115. There are three types of copyboards: the 2-page standard size type (model M-11S), the 2-page wide size type (M-11W) and the 4-page + screen type (M-115). In addition, depending on the product you have purchased, the printer and stand may be sold separately. The descriptions and diagrams in this manual refer to the model M-11S. * When functions or operations are specific to a certain model of copyboard, the model name is speci
Resumo do conteúdo contido na página número 3
Table of Contents Important Safety Information ......................................................................................................... E-4 Package Contents ........................................................................................................................... E-7 Main Functions ................................................................................................................................ E-8 Names of the Parts ...............................
Resumo do conteúdo contido na página número 4
Important Safety Information SAFETY PRECAUTIONS WARNING The unit’s rear panel should never be opened Heeding the safety precautions below will lengthen the by anyone other than a qualified serviceperson. product’s service life and prevent fires, electric shocks and Contact your store of purchase to request inter- injury. Read these safety precautions carefully and be sure nal inspection, adjustment, repair, and cleaning. to heed them. Handling the AC power adapter • Do not connect any AC ada
Resumo do conteúdo contido na página número 5
Important Safety Information Reflected Light from the Sheet Surface Preventing Tipping (for stand type units) The sheet surface of the main unit has a white glaze and To prevent tipping, heed the instructions below. Tipping when a projector or other optical equipment is projected, the could lead to personal injury or damage the unit. reflected light could result in eye fatigue or other symptoms, • Use the unit on a flat floor. so please be careful. • Be sure to attach the supplied stabilizers t
Resumo do conteúdo contido na página número 6
Important Safety Information Cleaning Do not draw on the screen (model M-115) • If the sheet is dirty, wipe it clean using a damp, thoroughly The screen is designed exclusively for use with optical devic- wrung out cloth. For tough dirt, apply some diluted neutral es. If you draw on the screen, the ink cannot be erased with detergent to a cloth, wipe off the dirt, then wipe again to the included eraser. If you accidentally draw on the screen, remove any detergent. wipe off the ink with a dilut
Resumo do conteúdo contido na página número 7
Package Contents The package contents are as described below. Please check before use. Copyboard, main unit [1] • Wall mount brackets [1 set] See “Assembly and Setup Manual” for information about the These fittings are used to mount the copyboard on a wall assembly parts of the copyboard. (See the Assembly and Setup Manual.). Printer* [1] (The set includes four copyboard brackets and 16 M4 Please see the instruction manual of the printer for informa- mounting screws.) tion about the printer
Resumo do conteúdo contido na página número 8
Main Functions Text or images drawn on the copyboard’s sheet surface can be printed in color or black and white on regular paper. A press of the “Print” button on the operation panel quickly prints what has been hand written on the sheet surface to regular LETTER or A4 size paper. By mitigating the need to take notes, the participants of the meeting can concentrate on the agenda. The paper printout can be written on and a stamp can also be affixed which is convenient if it is to be kept as a
Resumo do conteúdo contido na página número 9
Names of the Parts Front Main unit Frame cover Sheet Special markers are used on the sheet to draw diagrams and to write. Control panel (See Page E-12, 13) Pen tray Printer tray The printer* is placed here. Stand* This stand supports the copyboard. Effective Reading Size The area that can be copied is the gray area of approx. 10 mm the diagram. Note • It might not be possible to print or copy when storing to USB memory or personal comput- er any portions that are drawn outside of this
Resumo do conteúdo contido na página número 10
Names of the Parts Rear DC input connector Connect this with the DC plug end of the AC power adapter. (See Page E-16.) (Only connect the supplied AC power adapter; nothing else.) Personal computer (PC) dedicated USB port (Type B) Connect this with the USB port (type A) of the PC. (See Page E-29.) Use this when reading is started from the PC side and image data is transferred directly to the PC, or when setting the operating environ- ment of the copyboard from the PC side. First, insta
Resumo do conteúdo contido na página número 11
Names of the Parts Changing the Height of the Unit This is the height adjustment when setting up the copyboard on the optional stand. The stand height can be adjusted to 3 levels in 100 mm units. CAUTION Please have 2 or more people hold the unit. If the unit is dropped or falls over, this could cause unexpected injury. Please lock the casters by pushing the lower portion of the lock button. (1) Disconnect the power cable and all other connection lines. (2) Take out the printer and remove t
Resumo do conteúdo contido na página número 12
Names of the Parts Control Panel (models M-11S and M-11W) When pressing a button, please press the center area (i.e., the round and protruding portion). The button may not work if it is pressed on a corner. 4 + / − buttons (Number of copies) Pressing the + button or the − button sets the number of copies to be printed (to a maximum of 20 sheets). The number of copies appears in the display window. 2 5 Save button (USB memory storage) Moves a one-screen portion of sheet and reads it, then
Resumo do conteúdo contido na página número 13
Names of the Parts Control Panel (model M-115) When pressing a button, please press the center area (i.e., the round and protruding portion). The button may not work if it is pressed on a corner. 4 + / − buttons (Number of copies) Pressing the + button or the − button sets the number of copies to be printed (to a maximum of 20 sheets). The number of copies appears in the display window. 2 5 Save button (USB memory storage) 4 Moves a one-screen portion of sheet and reads it, then Number o
Resumo do conteúdo contido na página número 14
Operation Steps The copyboard uses a CCD image sensor to read the diagrams and text that have been written down with spe- cial (4-color) markers, and accumulates the image data in internal memory. Pressing the Print button prints out the sheet surface image data from the printer, and pressing the Save button stores the image data to USB memory. Preparation • Set up the newly purchased copyboard and connect a printer. See a separate manual titled “Assembly and Setup Manual.” • Connect a p
Resumo do conteúdo contido na página número 15
Connections Printer connector USB cable (supplied) 1 [PLUS code 715255400] USB connector Power cable supplied with the printer Wall outlet 2 AC power adapter supplied with the printer AC INPUT power connector * Be sure to insert all the plugs securely. 1 Connect the copyboard’s printer connector with the printer’s USB connector using the supplied USB cable. Notice For page printers When installing the printer for the first time, remove the protective sheet for use during transportation from the
Resumo do conteúdo contido na página número 16
Connection Connecting the Copyboard’s AC Power Adapter To use the copyboard, connect the supplied AC power adapter. 1 * Be sure to insert all the plugs securely. DC plug 3 2 Wall outlet AC power adapter (supplied) AC power cord (supplied) 1 Connect the DC plug of the AC power adapter to the DC power connector of the copyboard. 2 Connect the AC power cord to the AC power adapter. Once the printer and the copyboard’s power supply are connected, fasten them in place using the included cable clips
Resumo do conteúdo contido na página número 17
Setting the Time The clock of the copyboard should be set correctly because the date and time (timestamp) is printed on the printer paper, and it is also recorded in the file information when saving. Overview of the Operation 1 Switch to “Time setting” Press the ON/Standby button while holding down the Density button. 2 Display the day and hour setting mode Setting mode information indicated in the display window Number of Copies Print (First 2 digits) (Last 2 digits) Year Month Day
Resumo do conteúdo contido na página número 18
Setting the Time Press the + button or the − button, select 20 (the first 2 digits of the year), and press the Print button to finalize. Print There will be a change to the “last 2 digits of the year” set- ting mode ( display). Number of Copies Note • The factory default setting is 20. Pressing the Print The dot will flash while making settings. button in this condition will result in a change to the “last 2 digits of the year” setting mode. Press the + button or the − button, select
Resumo do conteúdo contido na página número 19
Printing Use a printer to print out the image that has been drawn on the sheet surface. Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operating instructions. Preparing the Printer Please check that the copyboard and the printer have been connected. See Page E-15. Set the paper. Please use A4 or letter size printer paper. Paper guide See your printer instruction manual for details. Appearance of printer is for 1) Arrange the pap
Resumo do conteúdo contido na página número 20
Printing This function prints the sheet screen of the copyboard on the printer connected to the copyboard. Basic Printing Operation M-11S/M-11W Preparation: Connect the AC power adapter to the copyboard. See Page E-16. Number of Copies Press the ON/Standby button and switch on the power. Print ON/ Standby Save Reprint Feed/Stop Prepare the printer. Note Density Color • Press the ON/Standby button more than 5 seconds after connecting the AC power adapter to the copyboard unit or after tu
