Resumo do conteúdo contido na página número 1
Ver. 1A
Quick Installation Guide
Wireless USB 2.0 1-Port Multi-Functional Printer Server
Model # AMPS240W
Package Content:
• 1-Port Wireless MFP
Server
• Driver & Utility CD
• Quick Installation Guide
Section 1
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Connecting the Printer Server
WARNING: Only a USB printer may be connec
Resumo do conteúdo contido na página número 2
Step 1 Power down the printer and the printer server. Step 2 Connect one end of a networking cable to your router, then connect the other end to the Ethernet port on the back of the print server. Step 3 Connect the USB cable coming from your printer into the USB port on the printer server. Step 4 Turn on the printer. Once the printer is powered on, connect the print server’s power adapter to an electrical outlet. Section 2 Installing the PS Software Note: The PS S
Resumo do conteúdo contido na página número 3
Note: If the autorun window does not appear automatically, go to Start -> Run and type D:\Utility\Setup.exe (where D is the letter of your CD-ROM drive) and click OK. Step 2 Select your setup language and click OK.
Resumo do conteúdo contido na página número 4
Step 3 Click Next at the welcome screen. Step 4 Click Next at the Choose Destination Location screen.
Resumo do conteúdo contido na página número 5
Step 5 Click Next at the Select Program Folder. Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish.
Resumo do conteúdo contido na página número 6
Section 3 Configuring the Printer Server Note: The following steps only need to be performed one time from one computer. Step 1 Click the Discover button and your printer should show up under Server Name. If your print server does not show up, check all power and network cable connections to the printer. You may also need to disable any software firewalls you have on your computer. Step 2 Once the printer server appears in the Server Name box, click on it. You should
Resumo do conteúdo contido na página número 7
Step 3 A password box will appear. The default password is admin. Enter it and click OK. Step 4 Click Next at the welcome screen.
Resumo do conteúdo contido na página número 8
Step 5 At the System screen you can change the Server Name, Port Name, and Password. Click Next after making the desired changes. If you do not have a specific Server Name, Port Name, or Password that you would like to use, click Next to accept the default settings. Step 6 At the Wireless screen you can input the wireless settings for your network. If you have a router, you will want to choose Infrastructure mode. If you are unsure of your SSID, contact your router manufacturer
Resumo do conteúdo contido na página número 9
Step 7 At the Wireless Encryption screen you can enter the wireless security settings of your router. If you do not use encryption, click Disable and then Next. If you are using encryption, you can get the encryption settings from your router or router manufacturer and enter them here. Afterwards, click Next. For WEP encryption, select WEP and enter your settings into the boxes below. For WPA-PSK, Select WPA-PSK and enter your Pre-Shared Key into the box. Please note that the pri
Resumo do conteúdo contido na página número 10
Step 8 If you have a specific IP address you would like to assign to the print server, select Manually Assign and enter your custom settings. Otherwise, select DHCP Assign Automatically and click Next. Step 9 If your network uses a workgroup name other than WORKGROUP, you can enter it here, or accept the default settings, and click Next.
Resumo do conteúdo contido na página número 11
Step 10 If you have specific AppleTalk settings, you can enter them here or accept the default settings, and click Next. Step 11 Click Save to save the changes to your print server. If you plan to use the print server wirelessly, you can now disconnect the Ethernet cable between the print server and the router.
Resumo do conteúdo contido na página número 12
Section 4 Configuring the Computer Note: The following steps must be completed on all computers you plan to use with the print server. Step 1 Double click on the PS-Link icon in the system tray to open the PS-Link software. Step 2 Click the Discover button and your printer should show up under Server Name. If your print server does not show up, check all power and network cable connections to the printer. You may also need to disable any software firewalls you have o
Resumo do conteúdo contido na página número 13
Step 4 Click OK at the Link Successfully screen. You will see notices appearing in the bottom right-hand corner of your screen while Windows configures the printer. Step 5 Once you see a notice that says Your new hardware is installed and ready to use, go to Start -> Control Panel and double click on Printers and Faxes (Vista users: Click on Printers instead of Printers and Faxes) Step 6 In Printers and Faxes (or Printers) you will see a copy of your printer. Right
Resumo do conteúdo contido na página número 14
Congratulations, the configuration is now complete. Remember to repeat all steps in Section 4 on each of the computers you plan to use with the print server.
Resumo do conteúdo contido na página número 15
Section 5 Wireless Troubleshooting If you are experiencing problems with the wireless connection (print server does not appear when you click discover, print jobs do not consistently work/finish, only able to communicate with the print server intermittently) you will want to tune your router’s signal by changing channels on the router. You do not need to change the channel on the print server, it will automatically pick up the new channel after you unplug the power and plug it b
Resumo do conteúdo contido na página número 16
Section 6 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com *Printer server may not support all printers. Go to the AirLink101 website to view the printer compatibility list. *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of n
