Manual do usuário Exergen Transmitter IRt/c.XMTR

Resumo do conteúdo contido na página número 1

IRt/c Accessories
Transmitter
The t/c.XMTR is specifically designed to interface any model IRt/c by a
IRt/c.XMTR
simple thermocouple connector or splice. The two wire current loop can
be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled
for the temperature range of interest.
In-Line Pre-Calibrated 4-20
mA Transmitter For OEMs, IRt/c sensors and t/c.XMTR can be supplied pre-wired
together.
· Use any existing wiring, for easy low cost installation
· Use existing PLC, computer o

Resumo do conteúdo contido na página número 2

IRt/c Accessories 0 IRt/c for Ambient >100 C Cooling Requirements Up to 450°F (230°C), air alone can provide sufficient cooling with the Cooling Jacket Kit. As the Air Cooling Chart illustrates, considerably less air is required to cool an IRt/c with a CJK-1 or CJK-2, than an IRt/c.5. For this reason, the IRt/c is recommended for hot areas if it is possible to bring the sensor close to the target. The air cooling chart extends above the recommended 450°F (230°C), and can be used there, but cauti

Resumo do conteúdo contido na página número 3

IRt/c Accessories Cooling Jacket Kits CJK-1 for IRt/c, IRt/c.3X, IRt/c.1X Water/Air Cooling A convenient and inexpensive kit makes it possible to use the IRt/c with air, water, or both for service in All Stainless Steel Housing harsh environments. Measuring only 1" x 4.16" (25 x 106 mm) overall, the CJK-1 is physically small enough to fit into tight areas and closely monitor Water Coil IRt/c.2 process temperatures from the optimum position - up Spring close. With its all stainless steel housing,

Resumo do conteúdo contido na página número 4

IRt/c Accessories Cooling Jacket Kits CJK-2 For IRt/c.3X only Air Only Cooling Features • Cooling up to 750°F (450°C) • Small size - 1" dia. x 3" lg. (76 x 25.4mm) • Stainless steel housing • Available with brass or stainless fittings • Air purge included • Ultra-efficient design for low air consumption and maximum cooling efficiency • Side venting for variable air flow 51 Water Street, Watertown, MA 02172 USA 51 51 51 51 51 CO RPORA TI O N 800-422-3006 • 617-923-9900 • Fax 617-923-9911

Resumo do conteúdo contido na página número 5

IRt/c Accessories IRt/c Accessories MB-1 Multi-Purpose Mounting Bracket APK-1, APK-2 The convenient Air Pump Kit allows for fast and easy installation of Pumps for Purge Air an air source suitable for maintaining optical cleanliness of IRt/c’s in APK-1 120 VAC dirty, dusty environments. Its air flow is sufficient to keep up to five APK-2 12 VDC IRt/c.2, or one IRt/c.5 clean. Additionally, the air flow is sufficient to allow an IRt/c.2 to operate in ambients up to 240°F (115°C). The pump can be m

Resumo do conteúdo contido na página número 6

IRt/c Accessories IRt/c Accessories Connector Kit • Easy Installation of IRt/c, with up to 1000' Thermocouple Connectors (300 m) Extension Cable with Shield • Connector Ground Protects Against Electrical Noise Errors • Write-On Area for Easy Identification to assure high accuracy. Each connector includes a • Superior Mechanical Connection Prevents write-on insert and an external ground strap to Signal Loss due to Vibration or Wire Movement maintain the electrical connection of the ground wire an

Resumo do conteúdo contido na página número 7

IRt/c Accessories Gooseneck Mounting Kit GMK-1 For fast, convenient testing of IRt/c’s For fast and convenient mounting of IRt/c’s, especially for testing, the Gooseneck Mounting Kit provides an inexpensive method to quickly install an IRt/c directly on the production line. Its heavy duty design provides excellent stiffness for reliable positioning. Clamps are fabricated of aluminum for durable performance. The sensor clamp fits all IRt/c models (the MB-1 Mounting Bracket is required for Adj