Resumo do conteúdo contido na página número 1
11b/g Wireless SOHO Router
User’s Manual
Version: 1.2
1
Resumo do conteúdo contido na página número 2
Table of Contents 1 INTRODUCTION................................................................................................................................5 1.1 FEATURES & BENEFITS ...........................................................................................................5 1.2 PACKAGE CONTENTS...............................................................................................................6 1.3 WIRELESS SOHO ROUTER DESCRIPTION...................................
Resumo do conteúdo contido na página número 3
3.5.6 DMZ .....................................................................................................................................44 APPENDIX A – SPECIFICATIONS..........................................................................................................45 APPENDIX B – FCC INTERFERENCE STATEMENT.........................................................................46 3
Resumo do conteúdo contido na página número 4
Revision History Version Date Notes 1.0 Jul 10, 2008 Initial Version 1.1 Aug 6, 2008 1.2 Aug 11, 2008 4
Resumo do conteúdo contido na página número 5
1 Introduction The Wireless SOHO Router operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless standard. High output power and high sensitivity can extend range and coverage to reduce the roaming between APs to get more stability wireless connection. It also can reduce the expense of equipment in the same environment. To protect your wireless connectivity, this device can encrypt all wireless tran
Resumo do conteúdo contido na página número 6
Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped in its original package. One Wireless SOHO Router One Power Adapter One CAT5 UTP Cable One CD-ROM with User’s Manual and Install Wizard One Quick Guide Wireless SOHO Router Description Top Panel Rear Panel Step Label Description 1 LAN Ports (1 – 4) Use an Ethernet cable to connect eac
Resumo do conteúdo contido na página número 7
socket on the wall, and the DC inlet into the DC connector. Connection / Activity This LED will light up once an Ethernet cable is connected LED to one of the LAN ports or the WAN port. WAN LED This LED will light up once an Ethernet cable is connected to WAN (Internet) port. WLAN LED This LED will light up once the RF (wireless LAN) feature is enabled Power LED This LED will light up once the power cable is connected to the DC connector. System Requirements The following are the
Resumo do conteúdo contido na página número 8
Network Configuration To better understand how the wireless LAN products work together to create a wireless network, it might be helpful to depict a few of the possible wireless LAN PC card network configurations. The wireless LAN products can be configured as: a) Ad-hoc (or peer-to-peer) for departmental or SOHO LANs. b) Infrastructure for enterprise LANs. a) Ad-hoc (peer-to-peer) Mode This is the simplest network configuration with several computers equipped with the PC Cards that for
Resumo do conteúdo contido na página número 9
2 Understanding the Hardware Hardware Installation 1. Place the unit in an appropriate location after conducting a site survey. 2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook. 3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL modem (Internet) 4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the wall. T
Resumo do conteúdo contido na página número 10
2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your PC/Notebook. 3. Select Use the following IP Address radio button and then enter the IP address and subnet mask. Ensure that the IP address and subnet mask are on the same subnet as the device. For Example: Device IP address: 192.168.1.1 PC IP address: 192.168.1.10 PC subnet mask: 255.255.255.0 4. Click on the OK button to close this window, a
Resumo do conteúdo contido na página número 11
After logging in you will graphical user interface (GUI) of the device. The navigation drop-down menu on left is divided into four main sections: 1. Management: This menu includes the administrator settings, advanced wireless settings such as wireless MAC clone and RTS/fragmentation threshold. Also included are other system related settings such as firmware upgrade, reset to factory defaults, and system date/time configuration. 2. TCIP/IP: This menu includes the configuration of the LAN
Resumo do conteúdo contido na página número 12
Status Click on the Status link under the Management menu. The device status page is also displayed once you have logged in. This includes details about the system uptime and firmware, LAN IP address and MAC address and the wireless settings such as the radio status, MAC address, SSID, RF channel, as well as WAN settings. 12
Resumo do conteúdo contido na página número 13
Statistics Click on the Statistics link on the navigation drop-down menu. This page displays the transmitted and received packet statistics of the wired and wireless interface. Click on the Refresh button to refresh the statistics. Dynamic DNS Click on the DDNS link on the navigation drop-down menu. This feature allows you to maintain your Internet domain name even if you IP address supplied by your ISP is a dynamic one. Enable DDNS: Place a check in this box to enable th
Resumo do conteúdo contido na página número 14
Time Zone Setting Click on the Time Zone Setting link in the navigation menu. This feature allows you to configure, update, and maintain the correct time on the device’s internal system clock as well as configure the time zone. The date and time of the device can be configured manually or by synchronizing with a time server. Note: If the device losses power for any reason, it will not be able to keep its clock running, and will not display the correct time once the device has been re
Resumo do conteúdo contido na página número 15
Denial of Service (DoS) Click on the Denial of Service link in the navigation menu. This is a security feature that blocks intrusions from the Internet that may disrupt the network service. Enable DoS protection: Place a check in this box to enable the DoS features. You may also enable the other DoS protection features listed below. If you are not sure what the DoS protection feature is used for, it is recommend keeping the feature disabled. Click on the Apply Change to save t
Resumo do conteúdo contido na página número 16
Log Click on the Log link on the navigation drop-down menu. Logs display a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes. Enable Log: Place a check in this box to enable the system logging feature. You may also click on system all, which will log wireless and DoS events. Enable Remote Log: Yo
Resumo do conteúdo contido na página número 17
Upgrade Firmware Click on the Upgrade Firmware link on the navigation drop-down menu. This page allows you to upgrade the firmware of the device in order to improve the functionality and performance. Ensure that you have downloaded the appropriate firmware from the vendor’s website. Connect the device to your PC using an Ethernet cable, as the firmware cannot be upgraded using the wireless interface. Click on the Browse button to select the firmware and then click on the Upload
Resumo do conteúdo contido na página número 18
Restore the Configuration from a File Click on the Save / Reload Settings link on the navigation drop-down menu. This option allows you to restore a backup configuration from a file to the device. Click on the Browse button to select the file and then click on Upload button. A page indicating the reloading process will be displayed. Please wait while the system restarts and load the configuration page based on the pervious IP address. Restore Settings to Factory Defaults Click on
Resumo do conteúdo contido na página número 19
Administrator Settings Click on the Password link on the navigation drop-down menu. This page allows you to configure the password to access this device from the web-browser. Note: The default user name and password of the device is admin User Name: Specify a user name that will be used to connect to the device. New Password: Specify a password. Confirmed Password: Re-type the password. Click on the Apply Changesto save the changes. TCP/ IP Settings Click on the TCP/IP
Resumo do conteúdo contido na página número 20
LAN Settings – Static IP Click on the LAN Interface link on the navigation drop-down menu. This feature allows you to configure the LAN interface using a static IP address or as a DHCP server/client. This IP address is also used to access the web-based interface. IP Address: Enter an IP address for this device. Subnet Mask: Enter the subnet mask for this IP address. Default Gateway: Enter the IP address of the default gateway. DHCP: Since you have specified a static IP addre
