Resumo do conteúdo contido na página número 1
COMPACT VHS CAMCORDER
CAMARA DE VIDEO VHS COMPACTO
CÂMERA VHS COMPACTA
GR-AXM33UM
Compact VHS
VICTOR COMPANY OF JAPAN, LIMITED
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
Printed in Japan
UM
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. 0198MKV UN YP LYT0109-001B
* *
0 GR-AXM33UM-Cover 1 98.2.16, 9:49 AM
PORTUGUÊS ESPAÑOL ENGLISH
GR-AXM33UM
Resumo do conteúdo contido na página número 2
2 EN Dear Customer, Warning on lithium battery Thank you for purchasing the JVC Compact The battery used in this device may present a VHS camcorder. Before use, please read the fire or chemical burn hazard if mistreated. Do safety information and precautions contained not recharge, disassemble, heat above 100°C in the following pages to ensure safe use of or incinerate. your new camcorder. Replace battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another battery
Resumo do conteúdo contido na página número 3
EN 3 IMPORTANT PRODUCT ANTENNA INSTALLATION INSTRUCTIONS SAFETY INSTRUCTIONS 1. Outdoor Antenna Grounding Electrical energy can perform many useful func- If an outside antenna or cable system is connected tions. But improper use can result in potential to the product, be sure the antenna or cable system electrical shock or fire hazards. This product has is grounded so as to provide some protection been engineered and against voltage surges and built-up static charges. manufactured to assure your
Resumo do conteúdo contido na página número 4
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits • Do not place this product on an unstable cart, a marked change in performance and you are stand, tripod, bracket or table. It may fall, causing unable to restore normal operation by following the serious injury to a child or adult, and serious detailed procedure in its operating instructions, do damage to the product. not attempt to service it yourself as opening or •
Resumo do conteúdo contido na página número 5
QUICK OPERATION GUIDE EN 5 SUPPLY POWER INSERTING A VIDEO CASSETTE Hook on. 1 PUSH EJECT 2 2 Push in. 3 4 BATT. RELEASE Using the battery pack 1 Open 1 Hook-on the battery pack’s top end to the camcorder. (Charging procedure, Z pg. 8) 1 Open the LCD monitor to an angle of over 2 Push in the battery pack until it locks into 45 degrees. place. 2 Press EJECT to open the cassette holder. 3 Insert a video cassette. To remove the battery pack 4 Press PUSH to close the cassette holder. Slide BATT. RELE
Resumo do conteúdo contido na página número 6
MAJOR FEATURES 6 EN REMEMBER Integrated Auto Light (Z pg. 23) The Logical Choice 5Sec.-Rec (5 sec. Recording) (Z pg. 21) The only compact video 22 x Optical Hyper Zoom cassettes that can be (Z pg. 20) used with your VHS VCR* Zoom-in Program AE with Special Effects (Z pg. 24) Zoom-out n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Effect PROVIDED ACCESSORIES n Sepia n Twilight n Sports n 1/1000 sec. High Speed Shutter n 1/2000 sec. High Speed Shutter •AC Power Adapter/ •Cassett
Resumo do conteúdo contido na página número 7
CONTENTS EN 7 GETTING STARTED 8 Power ...............................................................................................8 Clock (Lithium) Battery Insertion/Removal................................................. 10 Date/Time Setting ............................................................................. 11 Recording Mode Setting ....................................................................... 12 Tape Length Setting ......................................................
Resumo do conteúdo contido na página número 8
GETTING STARTED 8 EN Marks Power This camcorder’s 3-way power supply system lets you To AC outlet choose the most appropriate source of power. CHG. (charge) indicator NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER Connect the charger’s AC power cord to a wall REFRESH indicator 1 outlet. ATTACH BATTERY PACK REFRESH Align the marks and sli
Resumo do conteúdo contido na página número 9
EN 9 CHARGE MARKER Charge marker (OPTIONAL BATTERY ONLY) A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged. •The battery pack BN-V18U does not have a charge marker. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs.
Resumo do conteúdo contido na página número 10
GETTING STARTED (cont.) 10 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensure that the pl
Resumo do conteúdo contido na página número 11
EN 11 Date/Time Setting ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar 2 to “DATE/TIME”, then press it. The DATE/TIME Select Dial Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial MENU to move highlight bar to “EXIT” and press it, then Jog Dial go to step 6.
Resumo do conteúdo contido na página número 12
GETTING STARTED (cont.) 12 EN SP/EP Recording Mode Button Recording Mode Setting Set depending on your preference. SET RECORDING MODE First set the Power Switch to “CAMERA”. Press SP/EP 1 Button for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times as the recording time. Select Dial NOTE: If the recording mode is switched during recording, the playback picture will be
Resumo do conteúdo contido na página número 13
EN 13 Loading/Unloading A Cassette OPEN LCD MONITOR 2 2 Open the LCD monitor to an angle of over 45 4 4 3 3 1 degrees. OPEN CASSETTE HOLDER Press EJECT until the holder opens. Do not use force 1 5 2 to open. INSERT/REMOVE CASSETTE Make sure the label is facing outward. 3 CLOSE CASSETTE HOLDER Press PUSH and make sure the holder is closed and 4 locked. Turn to take up slack. CLOSE LCD MONITOR First make sure the holder is closed. Then close the Erase Protection Gear 5 LCD monitor. NOTES: c Closin
Resumo do conteúdo contido na página número 14
GETTING STARTED (cont.) 14 EN Power Zoom Button Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop Button and Power Zoom Button. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment POSITION VIEWFINDER 3 Adjust the viewfinder manually for best viewability 1 (see illustration at left). SELECT MODE
Resumo do conteúdo contido na página número 15
EN 15 Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 1 through the top of the eyelet 1, then fold it back 2 and thread it through the buckle 2. Repeat the 1 procedure to attach the other end of the strap to the 1 other eyelet 3, making sure the strap isn’t twisted. 3 ADJUST LENGTH Adjust as shown in the illustration at left 1. 2 Tripod Mounting ALIGN AND TIGHTEN Align the screw and camera direction stud on the 1 tripod with the camera’s mounting socke
Resumo do conteúdo contido na página número 16
RECORDING Basic Recording 16 EN LENS COVER Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 8) c Recording Mode/Tape Length Setting (Z pg. 12) c Grip Adjustment (Z pg. 14) LOAD A CASSETTE Power First open the LCD monitor to an angle of over 45 indicator 1 degrees. Press EJECT to open the cassette holder, then insert Power the cassette with the label facing out. Press PUSH to Switch ensure the holder is closed and locked.
Resumo do conteúdo contido na página número 17
EN 17 Tape remaining time indicator STOP RECORDING 25MIN MIN Press the Recording Start/Stop Button again to stop (Now calculating) 4 recording. •The camcorder re-enters the Record-Standby 120MIN mode. 119MIN NOTES: c When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the 3MIN LCD monitor switches on and the viewfinder switches off automatically to save power. 2MIN c A cassette holder can’t be opened unless a power supply (Blinking) is attached
Resumo do conteúdo contido na página número 18
RECORDING Basic Recording (cont.) 18 EN Shooting while watching the LCD monitor 90° 180° Before the following steps, perform step 1 (Z pg. 16). ENTER RECORD–STANDBY MODE Make sure the LCD monitor is fully open. Slide the 2 LENS COVER Open/Close Switch to open the lens cover, then set the Power Switch to CAMERA. •The power indicator lights and the camcorder enters the Record–Standby mode. LENS COVER Switch •The scene you’re aimed at appears in the LCD monitor, with the word “PAUSE” superimposed
Resumo do conteúdo contido na página número 19
EN 19 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR Make sure the LCD monitor is fully open. 1 TILT LCD MONITOR Tilt the LCD monitor in the most convenient 2 direction. •The LCD monitor can rotate almost full circle (270°: 90° downward, 180° upward). Interface shooting A person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor. T
Resumo do conteúdo contido na página número 20
RECORDING Basic Features 20 EN FEATURE: Zooming Zoom-in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. OPERATION: Zoom In Press the “T” of the Power Zoom Button. Zoom-out Zoom Out Press “W” of the Power Zoom Zoom indicator bar Button. n Zooming speed is available. A total of 4 zoom speeds are available. 2 speeds can be selected depending on how hard the Power Zoom Button is pressed (press the button Power Zoom button fully for regular-speed, pres
