Resumo do conteúdo contido na página número 1
User's Manual
LINE THERMAL PRINTER
MODEL
CBM-262
Resumo do conteúdo contido na página número 2
Declaration of Conformity Manufacturer’s Name : Japan CBM Corporation Manufacturer’s Address : CBM Bldg., 5-68-10, Nakano, Nakano-ku Tokyo, 164-0001, Japan Declare the Product Product Name Line Thermal Printer Model Number(s) CBM-262 Series (CBM-262-R, CBM-262-P) (S.No. 1001001 - ) Conform to the following Standards LVD :EN60950 :1992+A1+A2:1993 EMC :EN55022 :1995 Class B :EN50082-1 :1992 :IEC801-2 :1991 4KV CD, 8KV AD :IEC801-3 :1984 3V/m, 27MHz-500MHz :IEC801-4 :1988 0.5KV (Signal Line)
Resumo do conteúdo contido na página número 3
Cautions 1. Please read this user's manual thoroughly before attempting to use this printer. After read- ing, keep this manual in a secure place where it can be referred to easily if necessary. 2. The contents of this user's manual are subject to partial modification without prior notice. 3. Transfer of the contents of this user's manual, either in part or in whole, without permis- sion is strictly prohibited. 4. Do not attempt maintenance, disassembly or repairs of any parts of this printer e
Resumo do conteúdo contido na página número 4
EMI COMPLIANCE STATEMENT FOR CANADIAN USERS This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause in- terference to radio and television reception. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Inter- ference Regulations of the Canadian Department of Communications. This equipment is designed t
Resumo do conteúdo contido na página número 5
Important Safety Instructions 1. Read all of these instructions and save them for later reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 6. Slots and openings on the cabinet and
Resumo do conteúdo contido na página número 6
Cautions for Safety The following items are included in this manual to point out precautions that must be taken in order to prevent injury to the user or other persons or damage to property. • The degree of injury or damage caused by improper operation without heeding the warnings given herein is described as follows. This indicates contents in which improper operation of this product without heeding the warnings given may lead to death Warning or severe injury. This indicates contents in which
Resumo do conteúdo contido na página número 7
Cautions for Installation • Do not use or store this product in a place where there is fire or water vapor, where it will be exposed to direct sunlight, in a place where it will be exposed to heat or humidity conditions that it was not specified for, such as next to a heater or burner, or a place where there is a lot of oil, iron filings, dust or dirt, etc. Doing so could cause it to break down, emit smoke or catch fire. • Do not install this product in a place such as an experimental laborator
Resumo do conteúdo contido na página número 8
Cautions for Handling The following methods of handling may lead to breakdown, so please do not use this printer by these methods. • Do not attempt to print without paper being set in the printer. • Be careful not to let paper clips, straight pins, screws or other foreign objects fall inside the printer. • Do not spill any liquids on this product, or let it absorb any chemicals. • Do not subject this product to a strong impact, such as stepping on it, dropping it or hitting it. • Never attempt t
Resumo do conteúdo contido na página número 9
Contents Chapter 1 Outline ....................................... 1 Features ............................................................................................2 Accessories .......................................................................................2 Names and Functions of Parts ..........................................................3 Printer Unit ..................................................................................3 Operation Panel ........................
Resumo do conteúdo contido na página número 10
Chapter 6 Interfaces ................................ 31 Serial Interface ...............................................................................32 Specifications ............................................................................32 Signal Lines and Pin Arrangement............................................32 Explanation of Signal Names ....................................................33 Input/Output Circuits.................................................................3
Resumo do conteúdo contido na página número 11
1 Chapter 1 Outline This printer is a tandem type 2-station line thermal printer which accepts 58 mm wide paper, developed for use in PC-POS/ECR terminals and all types of data communications terminals, etc. Features Accessories Names and Functions of Parts 1
Resumo do conteúdo contido na página número 12
Chapter 1 Outline 1 Features • Compact design with the two rolls of paper set front to back to keep the printer's width narrow. • Power switch and operation panel are located on the front, and cable connections are made in an indented part, giving it a shape without projictions on the sides and rear, which makes installation easy. • The thermal line head reduces noise and achieves high speed printing at 62.5 mm/ sec. • An auto cutter is standard equipment in the receipt printer. TM • Simple cont
Resumo do conteúdo contido na página número 13
Names and Functions of Parts 1 Names and Functions of Parts Printer Unit Rear Cover Journal Window Front Cover Magnet Plate Coin Tray Operation Panel Power Switch. (Turns the power on and off.) 3
Resumo do conteúdo contido na página número 14
Chapter 1 Outline Operation Panel 1 1 4 3 2 1 POWER Indicator (Green) Lights up when the power switch is turned on and power is being supplied to the printer. 2 RECEIPT Key Feeds receipt paper. Pressing once causes the paper to advance one line, based on the amount for a carriage return set previously. If the key is pressed continuously, the paper is fed continuously. 3 JOURNAL Key Feeds journal paper. Pressing once causes the paper to advance one line, based on the amount for a carriage ret
Resumo do conteúdo contido na página número 15
Names and Functions of Parts Connectors 1 DIP Switch Cover Interface Connector Drawer Kick Connector Power Connector Ground Cable Connection Tap (Ground Terminal) Bottom View 5
Resumo do conteúdo contido na página número 16
Chapter 1 Outline Factory DIP Switch Settings 1 ON ON 12345678 1 234 DIP Switch 2 DIP Switch 1 The above switches are shown in the OFF position. • DIP switch 2 is used for the serial interface only. (See “Chapter 4 - Using the Printer,” on pages 25 and 26). 6
Resumo do conteúdo contido na página número 17
2 Chapter 2 Getting Started • After all the connections are completed, insert the power cord plug in the receptacle. • When redoing connections, be sure to turn off the power to the printer main unit and the terminal first. Connecting the Interface Cable Connecting the Drawer Kick Cable Connecting the Power Supply 7
Resumo do conteúdo contido na página número 18
Chapter 2 Getting Started 1 Connecting the Interface Cable 1. Insert the cable's connector into the interface connector. Align the top and bottom of the male and female connectors and connect the two connectors. 2 2. Fastening the Cable Terminals Fastening the Serial Interface Connector: After making sure the connector is inserted fully, tighten the screws to fasten the con- nector in place. • Use screws which can be tightened by hand to fasten the connector to the interface. Fastening the Paral
Resumo do conteúdo contido na página número 19
Connecting the Drawer Kick Cable Connecting the Drawer Kick Cable Connect the drawer kick cable to the drawer kick con- nector. Align the top and bottom of the cable connector and the drawer kick connector, then 2 insert the connector until it makes a clicking sound. Connect the drawer ground wire to the ground terminal with a screw. • Do not connect the connector for any other drawer (solenoid) to the drawer kick connector than that specified. • Use a M3 X 6 self tapping screw to fasten the gr
Resumo do conteúdo contido na página número 20
Chapter 2 Getting Started 1 Connecting the Power Supply 1. Connect the connector at the end of the AC adapter cable to the power supply connector. Align the top and bottom of the cable and connector to connect them. 2 When the AC adapter's plug is disconnected from the printer, grasp the plug with your fingers to pull it out. 2. Connect the AC power cord and the AC adapter. 3. Connect the power cord to the receptacle. Connect the AC adapter with the printer's power supply switched off. 10
