Manual do usuário Fujitsu FTP-637MCL401

Resumo do conteúdo contido na página número 1

24V dRiVEN, FTP-607 S eries
3” HigH SPEEd THERMAL PRiNTER
F T P - 6 37MCL401/601
n Overview
The FTP-637 MCL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-637 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
n HiGHLiGHTS
FTP-637MCL401/601
• Ultra low profile
Height 21.8 mm, width 103.2/104.5 mm, dept

Resumo do conteúdo contido na página número 2

FTP-637MCL401/601 n P ART NUMbERS Part Number Easy Load Model with low profile cutter FTP-637MCL401 FTP-637MCL601 LSI for driving MCL401 FTP-627CU301R MCL601 FTP-627CU601R Interface Cutter MCL401 FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C) board for supported MCL401 FTP-637DSL623R USB (V 1.1) Mech/Cutter FTP-637DSL625R Serial (RS-232C) MCL601 FTP-637DSL633R USB (V 1.1) FTP-637DSL635R Serial (RS-232C)/ Interface Parallel (Centronics) FTP-628Y202 cables Serial (RS232C) FTP-628Y302 US

Resumo do conteúdo contido na página número 3

FTP-637MCL401/601 n SPECiFiCA TiONS Item Specification Interface Conforms to RS232C/Centronics Power For print MCL401 24 VDC average current, 0.7A (1.3A peak) supply head MCL601 24 VDC average current, 1.3A (2.5 A peak) (print ratio: 12.5%, print speed 100mm/sec.) For motor 24 VDC ±5%, 1.0 A maximum For cutter MCL401 24 VDC ±5%, 1.1 A maximum MCL601 24 VDC ±5%, 1.3 A maximum For logic 3.3 to 5.25 VDC, 0.2 A maximum Dimensions Mechanism with cutter 104.5 x 42.2 x 21.8 mm (WxDxH) Interface DSL29

Resumo do conteúdo contido na página número 4

FTP-637MCL401/601 n FUNCTiON OF iNTERF ACE bOARd Item Item 1. Test print function 8. Cutter trouble detect 2. Paper out detection 9. Motor power saving function 3. Paper near end detection 10. Mark detection function 4. Paten open detection 11. MCU operation abnormality detection 5. Thermal head temperature abnormality 12. Power ON/OFF sequence protection detection 6. Blow-out fuse detection 13. Motor over-current protection 7. Head voltage abnormality detection 14. Hardware timer n diMENSiONS

Resumo do conteúdo contido na página número 5

FTP-637MCL401/601 1. Connector (FPC) specification (CN4) (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3071 (made by Molex) (2) Pin assignment on the mechanical side No Signal I/O Contents 1 PHK — Photointerrupter (Cathode) 2 VSEN I Ground power supply for paper sensor 3 PHE O Photointerrupter (Emittor) 4 VH I Head drive power 5 VH I Head drive power 6 VH I Head drive power 7 DI I Data input 8 STB3 I Strobe 3 9 STB4 I Strobe 4 10 VDD Logic Power 11 GND

Resumo do conteúdo contido na página número 6

FTP-637MCL401/601 Sensor (Photo- interruptor) Platen unit Thermal head Motor FPC Connect terminal: surface side Connector No 30, 29, .....................2,1 (FPC pin numbers) 2. Cutter (CN5) Connector on control circuit side: 52610-0871 Molex or equivalent No. Signal I/O Contents No. Signal I/O Contents 1 VSEN I Paper sensor power 2 PHE O Photo interruptor (emittor) 3 PHK Photo interruptor (cathode) 4 MTA I Motor excite signal A 5 MTA I Motor excite signal A 6 MTB I Motor excite signal B 7 M