Resumo do conteúdo contido na página número 1
Owner's Manual
CP-3
Digital
Surround
Processor
Resumo do conteúdo contido na página número 2
Lexicon Unpacking and Inspection After unpacking the CP-3, save all packing materials in case you ever need to ship the unit. Thoroughly inspect the CP-3 and packing materials for signs of damage. Remove the adhesive protective film from the CP-3 front- panel lens. Report any shipment damage to the carrier at once; report equipment malfunction to your dealer. Precautions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F
Resumo do conteúdo contido na página número 3
Safety Suggestions Read Instructions Read all safety and operating instruc- qualified service personnel when: tions before operating the unit. the power supply cord or the plug has been damaged, objects have fallen, or liquid has been spilled into the Retain Instructions Keep the safety and operating instruc- unit, tions for future reference. the unit has been exposed to rain, Heed Warnings Adhere to all warnings on the unit and in the the unit does not appear to operate normally or exhibits op
Resumo do conteúdo contido na página número 4
CP-3 Digital Surround Processor Owner's Manual
Resumo do conteúdo contido na página número 5
CP-3 Digital Surround Processor Contents 1 Introduction to the CP-3 1 Introduction 1 Using the Documentation 3 System Overview 4 2 Installation and Calibration 7 Controls and Indicators 7 The Front Panel • The Rear Panel The Standard Remote • The Expanded Remote Connection 12 Location Cosiderations • AC Connections Wiring Considerations • Audio/Video Connections • Connecting the CP-3 as a preamp • Connecting the CP-3 in a tape monitor loop • Video Connections Calibration 18 LCD Adjustment • The
Resumo do conteúdo contido na página número 6
Introduction Introduction to the CP-3 1 to the CP-3 CP-3 Digital Surround Processor Introduction All of the operating modes of the Lexicon CP-3 Digital Surround Processor have a common goal: to draw you, the listener, more deeply into a musical performance or a film. For music the CP-3 uses true stereo digital processing to recreate the original recording space or to create a new one of your ® choosing. For films it offers an extremely accurate version of Dolby Pro Logic Surround decoding with a
Resumo do conteúdo contido na página número 7
Introduction to the CP-3 Lexicon The Ambience and Reverberation modes transform the listening room into a new acoustic space, letting you choose an environment which matches your music or your mood. Unlike most ambience processors, the CP-3 provides full stereo processing, preserving the critical SI information in the recording and expanding upon it. The Ambience mode generates the side and rear reflection patterns of idealized rooms and concert halls. The larger spaces add the true depth and re
Resumo do conteúdo contido na página número 8
Introduction to the CP-3 CP-3 Digital Surround Processor Using the Because the CP-3 is designed to be customized for your system and your listening space, the information required for installation is considerably Documentation more extensive than that required for use of the system. We have, therefore, provided separate documentation for these needs. The CP-3 is shipped with an Owner's Manual, a Quick Reference Card and a booklet titled: CP-3 Theory and Design. The Owner's Manual is designed to
Resumo do conteúdo contido na página número 9
Introduction to the CP-3 Lexicon System Overview Although the CP-3 performs very complex signal processing, a great deal of effort has gone into making the technology behind the effects as transparent as possible to the user. To understand the overall organization of the unit, it is helpful to define those few terms which are unique to the CP-3. Glossary of Terms Mode A mode is a configuration that determines how the CP-3 will process an input signal. The CP-3 contains four basic modes: Panorama
Resumo do conteúdo contido na página número 10
Introduction to the CP-3 CP-3 Digital Surround Processor Essentially, the CP-3 can be thought of as a line level preamp with one audio-only and three audio/video inputs. It behaves as the master proces- sor for your system, controlling system volume, balance, source selections and acoustical environments. Two remote control units are provided with the system: an Expanded remote, and a Standard remote. The Expanded remote is designed primar- ily for use in configuring the CP-3 to work optimally w
Resumo do conteúdo contido na página número 11
Installation and Calibration 2 CP-3 Digital Surround Processor Controls and Indicators The Front Panel 1. Input The PROGRAM button steps EFFECTS MUTE turns off all 3. Alphanumeric Display The four INPUT buttons are through the modes of the signals added by the CP-3, The alphanumeric LCD (liq- used to select which input is bank currently in use. Using lights the yellow EFFECTS uid crystal display) shows processed by the CP-3. its Expanded modes, the CP- MUTE LED on the front both the mode that i
Resumo do conteúdo contido na página número 12
Controls and Indicators Lexicon The Rear Panel CAUTION: Never make or break any connections to the CP-3 with the rear-panel power ON. Make sure any associated amplifiers have been turned off for at least one minute before turning this master power switch on or off. 1. Power On/Off The three video inputs are This provides an unproc- Outputs The master power switch switched with their corre- essed, buffered audio output There are four stereo audio should be left ON when the sponding audio inputs a
Resumo do conteúdo contido na página número 13
Controls and Indicators CP-3 Digital Surround Processor The Standard Remote 4. On/Off 1. The Operating Modes Turning the CP-3 off with this The five operating mode but- button (or the front panel ON/ tons on the Standard Re- OFF button) deactivates the mote can be customized to unit while leaving power to load any of 45 operating the signal processing cir- modes. The specific modes cuitry to keep it at optimum we recommend for each but- operating temperature. ton are: The CP-3 uses this button’s
Resumo do conteúdo contido na página número 14
Controls and Indicators Lexicon The Expanded Remote 1. The Modes THX CINEMA (15) combines Dolby Pro Logic decoding The PANORAMA and the spectral enhance- modes (1, 2 and 3) ments of the LucasFilm provide enhanced Home THX Cinema system lateral sound (and to re-create film sound in hence greater spaciousness your home the way it was and envelopment) for either heard in the final production music or films. This mode is stages. effective even using only the two front loudspeakers. NORMAL(1) and W
Resumo do conteúdo contido na página número 15
Controls and Indicators CP-3 Digital Surround Processor 5. Bank s and t adjust the level of all s and t simultaneously ad- The BANK button switches signals added by the CP-3. just the level of all channels. between the three register These should be used in- banks: the Presets and the 8. Mutes stead of the volume control two User register Banks (A & MAIN MUTE turns off all out- on your preamp or receiver. B) where customized modes puts and lights both MAIN may be stored. The mode and EFX MUTE L
Resumo do conteúdo contido na página número 16
Connection Lexicon Connection Location The CP-3 is a highly specialized signal processing computer and requires special care during installation to ensure optimum performance. Considerations The CP-3 may be installed on a shelf or in a standard 19" equipment rack, using rack-mounting hardware available from Lexicon. Observe the fol- lowing precautions: • Select a dry, well-ventilated location out of direct sunlight. • Do not stack the CP-3 directly above heat-producing equipment such as power am
Resumo do conteúdo contido na página número 17
Connection CP-3 Digital Surround Processor Wiring Considerations There is controversy over the audible effects of different types of intercon- Audio/Video Cables nects. Good engineering practices have minimized the effect that cables might have on the inputs and outputs of the CP-3 — but feel free to evaluate different interconnects in your system. If you want to do some tweaking, be conscious of the mechanical stress from repeated insertion and overly tight connectors, and the possibly corros
Resumo do conteúdo contido na página número 18
Connection Lexicon Audio/Video Before making any connections, turn off ALL audio and video components, Connections including individual power amplifiers. (Unplug any preamps and power amps that don’t have power switches.) The CP-3 is designed to function as the control center of the system, selecting inputs and controlling the volume of all speakers in the system. There are several ways to integrate the CP-3 into the system, but they basically fall into two categories: those where the CP-3 is co
Resumo do conteúdo contido na página número 19
Connection CP-3 Digital Surround Processor If there are four or fewer sources to be used in the system, they can each be Connecting the connected directly to the CP-3 inputs. A typical system might use Input 1 for CP-3 as a preamp television, Input 2 for VCR, Input 3 for video disc and Input 4 for CD player or turntable (output through a preamp). Since Input 4 is audio only, the video output will default to the video signal from Input 1. This feature allows TV or other video source viewing while
Resumo do conteúdo contido na página número 20
Connection Lexicon Connecting the CP-3 If you have a receiver with no external access to the preamplifier outputs, you can use a tape output or external processor loop to the CP-3. However, in a Tape Monitor Loop any change in the receiver’s volume control after the system is adjusted will upset the balance between the main and auxiliary speakers. * In this configuration, use a Y-connector to hook the VCR to Video 1 as well if its tuner is used instead of the TV tuner. ** In this configuration,
