Resumo do conteúdo contido na página número 1
INSTALLATION/OPERATION
CCC1390H Series
Camera
C2924M-A (5/05)
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
Pixel Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Lens Focusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 5
List of Illustrations 1 CCC1390H Series Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2 DC-Drive Auto Iris Lens Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 3 Mounting Lens to Camera . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 6
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de
Resumo do conteúdo contido na página número 7
Description The CCC1390H Series camera is a compact, wide dynamic range (WDR), day/night camera. Its WDR technology provides up to 60 dB of dynamic range and produces superior images over a wide range of lighting conditions, including extreme backlight conditions. The camera also uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change. It also pro- vides a dual resoluti
Resumo do conteúdo contido na página número 8
33a Figure 1. CCC1390H Series Camera Lens Mount: Mount a standard CS-mount lens to the CCC1390H Series camera (refer to Lens Mounting). To use a C-mount lens, install a C/CS-mount adapter. Back Focus Locking Screw: Use a 1.5-mm Allen wrench to adjust the back focus (refer to Lens Focusing). Camera Mount and 3a Mount Adapter: Use the top or bottom mount hole. The maximum thread depth (top) is 0.188 inches (4.7 mm); the adapter extends the thread depth (top) to 0.
Resumo do conteúdo contido na página número 9
PARTS LIST CCC1390H Series camera Quick Start Guide Safety Instructions External control connector assembly: seven-pin micro (1.25 mm) connector with wires (26 AWG) and connector cover Camera mount spacer Four-pin auto iris connector (type DN-152N) Lens mount cap Resource CD: • Installation/Operation manual: INSTALL.PDF • Quick Start Guide: QSG.PDF • Important Safety Instructions: SAFETY.PDF OPTIONAL ACCESSORIES PCMA40 Lens adapter. Adapts standard C-mount lenses to CS-mount camera
Resumo do conteúdo contido na página número 10
Lens Mounting The CCC1390H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. It automatically senses an auto iris lens as soon as you plug in the connector. The camera has a standard CS-mount that can accept a C-mount lens with a PCMA40 lens adapter. After mounting an auto iris lens, but before using the camera, perform the auto iris automatic adjustment procedure (refer to Auto Iris Lens Adjustment). Also perform this procedu
Resumo do conteúdo contido na página número 11
MOUNTING THE LENS To mount the lens onto the camera (refer to Figure 3): 1. Make sure the lens will not touch the camera imager when installed. 2. Use clean, compressed air or a clean, dry lens cloth to make sure there is no dust or other foreign matter between the lens and the camera imager. 3. C-mount lens: Screw the adapter onto the lens. 4. Screw the lens onto the lens mount. 5. DC-drive auto iris lens: Connect the four-pin connector from the lens to the connector on the back of t
Resumo do conteúdo contido na página número 12
Camera Mounting The CCC1390H Series camera can be mounted from either the top or bottom, depending on the type of camera mount used in your installation. Use a standard 1/4-20 screw. The maximum thread depth (top) is 0.188 inches (4.7 mm). To extend the thread depth (top) to 0.25 inches (6.4 mm), use the camera mount spacer (supplied). The maximum thread depth (bottom) is 0.25 inches (6.4 mm). The CCC1390H Series camera can be fitted with most Pelco lenses and mounted into most P
Resumo do conteúdo contido na página número 13
Connecting Power, Video, and Control The CCC1390H Series camera offers standard power and coax video connectors as well as an external control connector. Before installation, identify how you will connect each power, video, and control lead to the camera. CONNECTING POWER The CCC1390H Series camera is designed to operate from either a 12 VDC or a 24 VAC power source. The camera automatically senses power type. Use only a Class 2 isolated power source tha
Resumo do conteúdo contido na página número 14
CONNECTING AC POWER The CCC1390H Series camera requires a power supply of 24 VAC ±15% (20.4 to 27.6 VAC), 50/60Hz. Make sure the power supply has a minimum rating of 270 mA. When connecting more than one camera to the same AC transformer, remember the following: • Connect the same side of the transformer to the same terminal on all cameras. Otherwise, the cameras may be out of phase, causing a vertical roll when switching between cameras. Refer to Camera Synchronization for more i
Resumo do conteúdo contido na página número 15
CONNECTING DC POWER The CCC1390H Series camera requires a power supply of 12 VDC ±15% (10.2 to 13.8 VDC). Make sure the power supply has a minimum rating of 390 mA. WARNINGS: • For safety, include a 1.0 A slow blow fuse when connecting DC power, as shown in Figure 5. • The DC power supply must be UL- and CE-certified. • Make sure you wire the power polarity correctly. To connect DC power: 1. Strip at least 0.4 inches (10 mm) of the insulation from each power wire. 2. Press and hold th
Resumo do conteúdo contido na página número 16
CONNECTING EXTERNAL CONTROL The external control connector on the rear panel lets you remotely access and control the CCC1390H Series camera. The external control connector assembly is a seven-pin micro (1.25 mm) connector with wires (26 AWG) and connector cover. You can access and configure the menu settings from any Pelco keyboard, receiver, or other device that supports the Pelco D or Pelco P protocol. The camera supports the following settings: • Baud rate: 2400, 4800, 9600, 19200 • Start b
Resumo do conteúdo contido na página número 17
CONNECTING SERIAL CONTROL (PELCO D/PELCO P) To connect serial control to the camera (refer to Figure 7): 1. Turn off power to the camera. 2. If necessary, use a small Phillips screwdriver to remove the connector cover from the rear panel (refer to Figure 6). 3. If necessary, plug the external control connector assembly (supplied) into the camera. Then use a small Phillips screwdriver to secure the assembly connector cover to the rear panel. 4. Use 100-ohm twisted pair cabling to wire each pair
Resumo do conteúdo contido na página número 18
7. If you are not connecting additional cameras, or after adding all cameras to the chain, make sure you set the termination switch to ON for the last camera in the chain. 8. Access the CAMERA SETUP menu to set the following (refer to Camera Setup): • Set a unique ADDRESS for each camera on the serial chain. • Set the communication rate (COM SPEED) to match the rate of each camera on the serial chain. Table C lists the ADDRESS and COM SPEED by Pelco protocol for accessing the camera from a Pelc
Resumo do conteúdo contido na página número 19
4. Use 100-ohm twisted pair cabling to wire the device to the enclosed connector assembly. The decision to use shielded cable depends on your installation; shielded cable may be optional. EXTERNAL SWITCH PIN 1 PIN 7 INPUT (7) GND (6) Figure 8. Day/Night Filter Control Configuration 5. Wire the camera to the external switch as follows: • Pin 7 (brown, signal input) to the (+) lead on the external switch. • Pin 6 (black, ground) to the (–) lead on the external switch. • Shielded cable only: Con
Resumo do conteúdo contido na página número 20
Quick Setup Several CCC1390H Series camera settings can be changed directly from the rear panel button. When a rear panel indicator is lit, the correspond- ing option is enabled. You can change the following options directly from the rear panel: AGC Press the button up to enable or disable automatic gain control (AGC). Refer to Automatic Gain Control (AGC) for more information. D/N Press the button left to enable or disable day and night mode. When enabled, the AUTO mode is selected. When disab
