Manual do usuário Peerless Industrial Group ACC 415

Resumo do conteúdo contido na página número 1

Assembly Instructions - Metal Stud Fastener Kits Models: ACC 215, ACC 415, ACC 615
Parts List
Description Qty. Part No.
A toggler (ACC 215 only) 2 560-9708
toggler (ACC 415 only) 4 560-9708
toggler (ACC 615 only) 6 560-9708
B 1/4-20 x 2.5" phillips (ACC 215 only) 2 520-9521
1/4-20 x 2.5" phillips (ACC 415 only) 4 520-9521
1/4-20 x 2.5" phillips (ACC 615 only) 6 520-9521
C 1/4" SAE washer (ACC 615 only) 6 540-9440
A
B
C
1 of 2 ISSUED: 05-23-02 SHEET #: 120-9012-4 10-29-07
Visit the Peerless Web

Resumo do conteúdo contido na página número 2

FOR METAL STUD WALLS ONLY: Drill four 1/2" (13mm) dia. holes through drywall and studs at locations corresponding to wall plate. Insert togglers (A) as shown below... WARNING • Product must be mounted through drywall that has a A minimum thickness of 1/2" and into metal studs, 26 gauge or heavier.  Make sure that togglers are anchored into the center ∅ 1/2" of the studs as shown in figure 1. The use of an "edge (13 mm) to edge" stud finder is highly recommended. Pivot end of toggler (A). A Push