Resumo do conteúdo contido na página número 1
User’s Manual
Color LCD Monitor
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
English TABLE OF CONTENTS PRECAUTIONS ...................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .............
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
Resumo do conteúdo contido na página número 6
English WARNING Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. * Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. * Do not place the cord underneath the unit or other heavy objects. * Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use
Resumo do conteúdo contido na página número 7
English CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. OK Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not
Resumo do conteúdo contido na página número 8
English LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do no
Resumo do conteúdo contido na página número 9
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • Dual inputs compliant (DVI-I and D-Sub mini 15 pin connecters) • DVI (p. 44) Digital input (TMDS (p. 45)) compliant • [Horizontal scanning frequency] Analog: 24 - 94 kHz Digital: 31 - 76 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1600 dots x 1200 lines • Smoothing function incorporated f
Resumo do conteúdo contido na página número 10
English 1-3. Controls & Connectors Front (2) (1) FineContrast Menu Control Panel SIGNAL AUTO ENTER 1 - 2 (3) (4) (5) (6) (7) (8) ® (1) ScreenManager (2) Main PowerSwitch (3) Input Signal Selection Button (4) AutoAdjustmentButton (5) Enter Button *1 *2 (6) Control Buttons (Left, Down, Up, Right) (7) PowerButton *3 (8) PowerIndicator Blue Operation Yellow Power saving Flashing yellow Power save mode Digital only (2 times for each) Flashing yellow Power is off (Main power is on) slowly Off Pow
Resumo do conteúdo contido na página número 11
English Rear (9) (10) (11) Bottom (12)(13)(14) (15) * 4 (9) Height Adjustable Stand (Detachable) (10) Power Terminal Covers for the Optional Peripheral *5 (11) Security Lock Slot (12) DVI-I Input Connector (SIGNAL 1) (13) D-Sub mini 15 pin Input Connector (SIGNAL 2) (14) USB Port (1 Upstream) (15) Power Connector *4 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) For the Portrait display, use the software for the portrai
Resumo do conteúdo contido na página número 12
English 2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (resolution p. 45) and frequency) in accordance with the charts below. NOTE • When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Dot Clock Remarks × 640 480 67 Hz 202.5 MHz Apple Macintosh 640 × 480 ~
Resumo do conteúdo contido na página número 13
English 2-2. Connecting the Signal Cable NOTE • Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Power Cord Analog Input Signal Cable Connector PC Signal Cable (MD-C87 Video Output • Standard graphics card enclosed) Connector / D-Sub mini • Power Macintosh G3 (Blu
Resumo do conteúdo contido na página número 14
English Digital Input Signal Cable Connector PC Signal Cable (FD-C39 Video Output • Digital graphics board enclosed) Connector / DVI • Power Mac G4 (DVI) Input Connector (monitor) / DVI NOTE • The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple Display Connector) 2. Plug the power cord into the power connector on the rear of the monitor. 3. Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE • When housing the cables into the cable holder
Resumo do conteúdo contido na página número 15
English WARNING The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Not doing so may cause in fire or electric shock. 5. Turn on the monitor’s Power Button and then turn on the PC’s power. The monitor’s power indicator will light up (blue). If an image does not appear, refer to the “TROUBLESHOOTING” (p.36) for advice. Whenever finished, turn off the PC and the monitor. NOTE • When turning on the monitor, the kind of the input signal (
Resumo do conteúdo contido na página número 16
English 2-3. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor. Connecting Examples D-Sub 15 pin mini DVI-I Input Connector Input Connector (SIGNAL 2) (SIGNAL 1) PC 1 PC 2 (Ex.1) Analog D-Sub Signal Cable Signal Cable D-Sub Analog mini 15 mini (FD-C16 enclosed) (MD-C87 enclosed) pin 15 pin (Ex.2) Digital DVI Signal Cable Signal Cable D-Sub Analog mini (FD-C39 enclosed) (MD-C87 enclosed) 15 pin NOTE • Whe
Resumo do conteúdo contido na página número 17
English The Priority Input Signal This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the “Input Priority” setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal. In the case of only one signal being present at either input, the monito
Resumo do conteúdo contido na página número 18
English 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. [Ex.] Custom Main Menu Control Buttons Left, Down, Up, Right SIGNAL AUTO ENTER 1 - 2 Auto Adjustment FineContrast Menu Enter Button Button NOTE • Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager.
Resumo do conteúdo contido na página número 19
English 3-2. ScreenManager Adjustments and Settings. The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Sub menu Reference * Screen Clock 4-1. Screen Adjustment (p.24) * Phase Position Resolution * Range Adjustment Smoothing * Signal Filter *1 Color(Custom) Brightness 4-3. Color Adjustment (p.30) Temperature Gamma Saturation Hue Gain 6 Colors Reset ** PowerMan
Resumo do conteúdo contido na página número 20
English *1 The adjustable functions depend on the selected FineContrast mode. The above table shows the sub menus when the ‘custom’ mode is selected (see page 30). *2 The displaying time of the FineContrast Menu cannot be changed. *3 Due to the inspection on the factory, the usage time may not be “0 hour” at shipping. 3-3. FineContrast This function allows you to select the best suited mode for screen display. To select the Mode Directly pressing the left or right button allows you to select t
