Resumo do conteúdo contido na página número 15
NOTES _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ ______________________________________________
Resumo do conteúdo contido na página número 16
FRANÇAIS AGENCEMENT DES PANNEAUX D'EXTRÉMITÉ Panneau d'entrée (figure ) . DEL d'alimentation - Allumée, indique que l'amplificateur est en marche . 2 . Entrée haut niveau - Raccorde la sortie du haut-parleur de la radio d'origine à l'amplificateur, détecte le signal de la radio et allume l'amplificateur au besoin, l'éteint après une minute sans signal . 3 . Sorties RCA - Pour un signal à gamme étendue facilitant le raccord à des amplifica- teurs supplémentaires . 4 . Entrées RCA - Accepten
Resumo do conteúdo contido na página número 17
SPÉCIFICATIONS DE L'ACE CO500 . Sortie: 75 Watts RMS x à 4 ohms, taux d'harmoniques et bruit < % Rapport signal/bruit: -80 dBA (référence Watt dans 4 ohms) Sortie additionnelle: 250 Watts RMS x à 2 ohms, taux d'harmoniques et bruit < % CO800 . Sortie: 300 Watts RMS x à 4 ohms, taux d'harmoniques et bruit < % Rapport signal/bruit: -75 dBA (référence W att dans 4 ohms) Sortie additionnelle: 400 Watts RMS x à 2 ohms, taux d'harmoniques et bruit < % FAISCEAUX À HAUT NIVEAU
Resumo do conteúdo contido na página número 18
Commutateurs de phase ● 0° - ne change pas la sortie, qui reste en phase avec le signal d'entrée . ● 180° - inverse la sortie . La sortie du canal est déphasée de 80° . Cette configuration sert à inverser la phase des caissons de basses pour améliorer l'activation dans un véhi- cule . Elle permet aussi de brancher en pont deux amplificateurs dans un haut-parleur . Configurations des sorties auxiliaires Les sorties auxiliaires des amplificateurs Orion Cobalt permettent une expansion facile et
Resumo do conteúdo contido na página número 19
● Raccordez la borne REM à la borne d'allumage à distance du récepteur pour fournir l'alimentation +2V requise pour allumer l'amplificateur . ● Mettez du câble de mise à la masse supplémentaire entre la borne négative de la bat- terie et le châssis . Câblage des haut-parleurs CO500.1/CO800.1 Les amplificateurs Orion Cobalt CO500.1 and CO800.1 disposent de deux bornes positives et deux bornes négatives de sortie pour le raccord des haut-parleurs à l'amplificateur. Ces amplificateurs étant mono
Resumo do conteúdo contido na página número 20
un refroidissement adéquat . Coffre Le montage dans le coffre produira d'excellents résultats pourvu que vous ne limitiez pas la circulation d'air autour du dissipateur thermique de l'amplificateur . Pour de meilleurs résultats, donnez à l'amplificateur autant d'espace libre que possible . L'effet de convection du châssis de l'amplificateur assurera un refroidissement optimal pour ce type de montage . Précautions générales et conseils d'installation ATTENTION! Faites attention à ne pas couper
Resumo do conteúdo contido na página número 1
™
OWNER'S MANUAL
Amplifier
MODEL
CO500.1
CO800.1
Vista, CA 92801
d i r e c t e d . c o m
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . . . . . . . Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 . . . . . . . . . . . . . . . . . . . . . . Deutsche . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 3
INTRODUCTION Thank you for your purchase of a Orion Cobalt power amplifier . Each Orion Cobalt amplifier is designed to be the leader in its class offering the most power, advanced features, and extreme ease of use . In high-end sound systems or high SPL systems, Orion Cobalt amplifiers will give you years of trouble-free performance . ● CO500.1 - 250 Watt - single-channel Class A/B amplifier with built-in fully variable low-pass crossover . Equipped with remote gain, the CO500 . is capable
Resumo do conteúdo contido na página número 4
TOOLS OF THE TRADE Listed next are the majority of the tools required to perform an installation . Having the proper tools will make the installation that much easier . Some of these tools are necessities; some will 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 2 3 4 5 just make the job easier . ● Allen Wrenches (2mm, 3mm & 4mm) ● DMM or VOM ● Electric drill with assorted drill bits ● Grommets ● Heat shrink tubing ● Marking pen CO600.4 ● Phillips and flat blade screw drivers ● Nylon tie straps ● Pli
Resumo do conteúdo contido na página número 5
1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 2 3 4 5 CO600.4 1 2 3 4 5 6 7 8 9 1 2 2 3 4 5 9 . Lo-Pass Crossover Frequency Control - adjusts the frequency of the crossover . 0 . Remote Bass Gain Jack - connects RGC-2 (remote bass control) . CO600.2 . Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of turn-on . Output Plate 1 2 3 4 5 6 7 8 9 10 11 1 2 2 3 4 5 CO800.1 CO500.1 Figure 2 Figura 2 Abbildung 2 . Speaker Connections - accepts up to 2
Resumo do conteúdo contido na página número 6
HIGH LEVEL HARNESSES Do not connect the high level input connections to power, signal, or chassis ground as damage to the head-unit outputs may result . The high-level inputs are designed to work with either grounded or BTL speaker level outputs (found on most head units) . HIGH LEVEL CONNECTIONS WIRE COLOR INPUT CONNECTION Black Ground White/Black - Left channel White + Left channel Gray/Black - Right channel Gray + Right channel AMPLIFIER SETTINGS Signal Input and Output Configurations The
Resumo do conteúdo contido na página número 7
loudspeaker owner's manual for assistance in choosing the proper crossover frequencies for your system . Low-Pass Crossover The low-pass crossover is active with a 2nd order (2dB per octave) slope . The low-pass crossover is continuously variable from 50Hz to 500Hz . Remote Bass Operation The remote bass port provides easy remote access to the internal bass gain structure of the power amplifier . The bass gain is centered at 44Hz . The RGC-2 plugs into the amplifier via the /8" mini jack
Resumo do conteúdo contido na página número 8
Bridging For bridging into a single speaker load, the Orion Cobalt CO500 . and CO800 . have the ability to be bridged with another amplifier of the same model . To do this you must set the PHASE switch on the (slave) amp, move the phase switch from 0 to 80, exactly opposite of the master amp . Refer to the Phase Switch section of this guide . Be sure to set all adjustment on both amplifiers exactly the same except for the phase switch . The phase switch on the master amplifier should be
Resumo do conteúdo contido na página número 9
Trunk Compartment Mounting your amplifier in the trunk provides excellent performance as long as you do not restrict the airflow around the heatsink of the amplifier . For optimal results, mount the amplifier with as much clearance as possible . This type of mounting will yield the best cooling due to the convection effect of the amplifier chassis . General Precautions and Installation Tips WARNING! Be careful not to cut or drill into gas tanks, fuel lines, brake lines, hydraulic lines, vacu
Resumo do conteúdo contido na página número 10
results use a marking pen to mark the mounting holes and pre-drill these holes with a standard /8" drill bit . Step 5 Mount the amplifier . Make sure the amplifier is mounted on a flat surface . If this is not possible, do not over tighten the screws so that the chassis of the amplifier is twisted or bent . Step 6 Turn the vehicle's key switch to the off position . Step 7 Disconnect the vehicle's battery ground terminal . Step 8 Connect power wires to the amplifier (ground first, then 2 V(+
Resumo do conteúdo contido na página número 11
System section of this manual . Adjusting the Sound of the System Once you have checked the system's operation, adjust the sound of the system . Adjusting the sound of the system is accomplished by setting the level controls and adjusting the internal crossovers . Step Turn the signal source volume control all the way down . Set any tone controls to their flat or defeated positions . This includes the loudness control . Step 2 Turn the level controls of the amplifier to their minimum positi
Resumo do conteúdo contido na página número 12
Troubleshooting Tips Symptom Probable Cause Action To Take No output Low or no remote turn-on Check remote turn-on voltage at voltage amplifier and repair as needed . Fuse blown Check power wire's integrity and check for speaker shorts . Fix as needed and replace fuse . Power wires not connected Check power wire and ground connections and repair or replace as needed . Audio input not connected . Check RCA connections and repair or replace as needed . Speaker wires not connected Check speake
Resumo do conteúdo contido na página número 13
Symptom Probable Cause Action To Take Poor bass response Crossover set incorrectly Reset crossovers . Refer to the Internal Cross- over Configuration section of this manual for detailed instructions . Impedance load at amplifier is Check speaker impedance load if below 2Ω, too low . rewire speakers to achieve higher impedance . Battery fuse blowing Short in power wire or incor- Check power wires and ground connections rect wiring . and repair or replace as needed . Fuse used is smaller than
Resumo do conteúdo contido na página número 14
SPECIFICATIONS Amplifier Section CO500.1 CO800.1 Power Output in Watts RMS, 4 Ohms 75 x 300 x Power Output in Watts RMS, 2 Ohms 250 x 400 x Externally Bridgeable yes yes Remote Gain Function yes yes Distortion at Rated Power < 0 .9% THD+N < 0 .9% THD+N Frequency Response 20Hz to 30kHz 20Hz to 30kHz +0, -dB +0, -dB Linear Bandwidth 20Hz to 20kHz 20Hz to 20kHz ±3dB ±3dB Damping Factor > 50 > 50 Input Sensitivity rms rms Input Impedance 80kΩ 80kΩ Fuse Type (2) 20 Amp ATC (2) 30 Amp
