Resumo do conteúdo contido na página número 1
Changer Control
Audio Master
US
Operating Instructions
CT
KR
사용설명서
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. WX-4500X Serial No.
For installation and connections, see the supplied installation/connections manual.
설치 및 접속에 눀해서는 부속된 설치/ 접속
Resumo do conteúdo contido na página número 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Changer comply with the limits for a Class B digital Control Audio Master. You can enjoy its various device, pursuant to Part 15 of the FCC Rules. features even more with: These limits are designed to provide reasonable Optional CD/MD units (both changers and 1 protection against harmful interference in a players)* . residential installation. This equipment CD TEXT information (displayed when
Resumo do conteúdo contido na página número 3
Table of Contents Location of controls . . . . . . . . . . . . . . . . . . . 4 Radio Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Storing stations automatically Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 7 — Best Tuning Memory (BTM) . . . . . . 14 Notes on Cassettes . . . . . . . . . . . . . . . . . . . . 8 Receiving the stored stations . . . . . . . . . . . 15 Storing only the desired stations . . . . . . . . 15 Getting Started Storing station names R
Resumo do conteúdo contido na página número 4
Location of controls CD DSO EQ7 SCRL DSPL OFF TAPE SA ATT SEEK/AMS SEEK/AMS SOUND SOURCE MENU MODE 4
Resumo do conteúdo contido na página número 5
SEEK/AMS SEEK/AMS Refer to the pages listed for details. CD/MD : During CD/MD playback TAPE : During tape playback RADIO : During radio reception : During menu mode MENU a Frequency select switch (located on the n Jog roller left side of the unit) Jog roller usually functions as a volume See “Frequency select switch” in the control except in some adjusting modes. Installation/Connections manual. CD/MD 11, 12 RADIO 15, 16, 17 b DSO button 20 MENU 9, 10, 11, 12, 13, 14, 15, 16, 20, c SC
Resumo do conteúdo contido na página número 6
LIST SOUND Card remote commander RM-X114 Precautions (optional) If your car was parked in direct sunlight, allow the unit to cool off before operating it. Power antennas will extend automatically while you select the radio reception. DSPL MODE If no power is being supplied to the unit, check the connections first. If everything is in order, + PRESET check the fuse. If no sound comes from the speakers of a two- DISC + speaker system, set the fader control to the center position. S
Resumo do conteúdo contido na página número 7
Notes on CD-R/CD-RW discs You can play CD-Rs (recordable CDs)/CD- Notes on discs RWs (rewritable CDs) designed for audio use on this unit. To keep the disc clean, do not touch the surface. Look for these marks to distinguish CD-Rs/ Handle the disc by its edge. CD-RWs for audio use. Keep your discs in their cases or disc magazines when not in use. Do not subject the discs to heat/high temperature. Avoid leaving them in parked cars or on dashboards/rear trays. These marks denote that a
Resumo do conteúdo contido na página número 8
Notes on Cassettes Getting Started Cassette care Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. Resetting the unit Keep cassettes away from equipment with built-in magnets such as speakers and Before operating the unit for the first time, or amplifiers, as erasure or distortion on the after replacing the car battery or changing the recorded tape could occur. connections, you must reset the unit. Do not expose cassettes to direct sunlight,
Resumo do conteúdo contido na página número 9
Setting the clock CD Player The clock uses a 12-hour digital indication. CD/MD Unit (optional) Example: To set the clock to 10:08 In addition to playing a CD with this unit, you can also control external CD/MD units. 1 Press (MENU), then rotate the jog roller until “Clock” appears. Note If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. 1Push the jog roller. Playing a disc The hour indication flashes
Resumo do conteúdo contido na página número 10
Tip (With optional unit) When Auto scroll is set to off and the disc/track name is changed, the disc/track name does not scroll. 1 Press (SOURCE) repeatedly to select “CD” or “MD.” 2 Press (MODE) repeatedly until the Playing tracks repeatedly desired unit appears. Playback starts. — Repeat Play Locating a disc The disc in the main unit will repeat a track or the entire disc when it reaches the end. For repeat — Disc selection play, you can select: (see “Locating a disc by name” on page 12
Resumo do conteúdo contido na página número 11
Note Tips “Shuffle all” will not shuffle tracks between CD units Simply overwrite or enter “” to correct or erase a and MD units. name. There is another way to start labeling a CD: Push the jog roller for 2 seconds instead of performing steps 2 and 3. You can label CDs on a unit without the CUSTOM Labeling a CD FILE function if that unit is connected along with a CD unit that has the function. The Disc Memo will be — Disc Memo (For a CD unit with the stored in the memory of the CD u
Resumo do conteúdo contido na página número 12
Locating a disc by name Selecting specific tracks for — List-up (For a CD unit with the CD TEXT/ playback CUSTOM FILE function, or an MD unit) — Bank (For a CD unit with the CUSTOM FILE You can use this function for discs that have been function) 1 assigned custom names* or for CD TEXT 2 If you label the disc, you can set the unit to skip discs* . or play the tracks of your choice. *1 Locating a disc by its custom name: when you assign a name for a CD (page 11) or an MD. 1 Start playing t
Resumo do conteúdo contido na página número 13
Playing specific tracks only You can select: Cassette Player Bank on — to play the tracks with the “Play” setting. Bank inv (Inverse) — to play the tracks with the “Skip” setting. Listening to a tape 1 During playback, press (MENU), then rotate the jog roller until “Bank on,” Insert a cassette. “Bank inv,” or “Bank off” appears. Playback starts automatically. 2 Press (SEEK/AMS +) repeatedly until the desired setting appears. 3 Push the jog roller. Playback starts from the track followin
Resumo do conteúdo contido na página número 14
Playing a tape in various Radio modes The unit can store up to 10 stations per band You can play the tape in various modes: (FM1, FM2, and AM). Met al lets you play a metal or CrO2 tape. BL.Skip (Blank Skip) skips blanks longer than Caution When tuning in stations while driving, use Best 8 seconds. Tuning Memory to prevent accidents. ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding the tape. NR (Dolby NR) lets you select the Dolby* NR B system. * M
Resumo do conteúdo contido na página número 15
Automatic reception frequency adjustment Receiving the stored stations — IF Auto function 1 Press (SOURCE) repeatedly to select While receiving FM stereo, interference from a the radio. nearby station may make listening difficult. In such cases, the “IF Auto” function of this unit 2 Press (MODE) repeatedly to select the will automatically narrow the reception band. frequency to eliminate noise. For this reason, 3 Push the jog roller. some FM stereo broadcasts may become monaural. If you
Resumo do conteúdo contido na página número 16
Displaying the station name Switch the display item to frequency or station Storing station names name*. — Station Memo To Press You can assign a name to each radio station and store it in memory. The name of the station Switch display (DSPL) during radio currently tuned in appears in the display. You can item reception assign a name using up to 8 characters for a station. * If the station name is not stored, “NO Name” appears in the display for one second. Storing the station names Eras
Resumo do conteúdo contido na página número 17
DSPL MODE SOUND Tuning in a station through a Other Functions list You can also control the unit (and optional CD/ — List-up MD units) with a rotary commander (optional). 1 During radio reception, push the jog roller. The frequency or the name assigned to the Using the rotary commander station currently tuned in flashes. First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls. 2 Rot
Resumo do conteúdo contido na página número 18
*1 Only if the corresponding optional equipment is Changing the operative direction connected. The operative direction of controls is factory-set *2 If your car has no ACC (accessory) position on the as shown below. ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning To increase off the ignition. By rotating the control To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse t
Resumo do conteúdo contido na página número 19
Adjusting the sound Changing the sound and characteristics display settings — Menu You can adjust the bass, treble, balance, fader, and subwoofer volume. The following items can be set: The bass and treble levels and subwoofer volume can be stored independently for each source. Set up Clock (page 9) 1 Press (SOURCE) to select a source Beep — to turn the beeps on or off. (radio, CD, MD, or tape). RM (Rotary Commander) — to change the 2 Press (SOUND) repeatedly to select operative direc
Resumo do conteúdo contido na página número 20
Sound HPF (High pass filter) (page 21) Setting the Dynamic LPF (Low pass filter) (page 22) Soundstage Organizer (DSO) Loud (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced. If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear. P.Mode (Play Mode) The DSO (Dynamic Soundstage Organizer) Local on/off (Local seek mode) (page 15) function creates a more ambient sound as if the
