Resumo do conteúdo contido na página número 1
CD-RECEIVER
KDC-MP333V
INSTRUCTION MANUAL
© B64-3474-00/00 (MW)
Resumo do conteúdo contido na página número 2
Contents Safety precautions 3 Menu system 16 Menu System Notes 4 Touch Sensor Tone Manual Clock Adjustment About CDs 5 DSI (Disabled System Indicator) Dimmer About MP3 and WMA 6 CRSC (Clean Reception System Circuit) Text Scroll General features 7 CD Read Setting Power Switches the NTSC/PAL setting Selecting the Source Accessories/ Volume Installation Procedure 19 Attenuator System Q Connecting Wires to Terminals 20 Audio Control Audio Setup Installation 21 Speaker Setting Switching Display Remo
Resumo do conteúdo contido na página número 3
Safety precautions Lens Fogging 2WARNING When you turn on the car heater in cold weather, To prevent injury or fire, take the dew or condensation may form on the lens in the following precautions: CD player of the unit. Called lens fogging, this • To prevent a short circuit, never put or leave any condensation on the lens may not allow CDs to metallic objects (such as coins or metal tools) play. In such a situation, remove the disc and wait inside the unit. for the condensation to evapora
Resumo do conteúdo contido na página número 4
Notes • If you experience problems during installation, Cleaning the Faceplate Terminals consult your Kenwood dealer. If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. The marking of products using lasers • If the unit fails to operate properly, press the Reset (Except for some areas) button. The unit returns to factory
Resumo do conteúdo contido na página número 5
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be
Resumo do conteúdo contido na página número 6
About MP3 and WMA The playable MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 64 (Joliet: 32) characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property: 30 file and folder names may not display correctly. characters Playable Audio file • MP3, WMA • File/Folder name is the number of the characters inclu
Resumo do conteúdo contido na página número 7
General features Release button Control knob LOUD indicator ATT indicator Clock display Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Attenuat
Resumo do conteúdo contido na página número 8
General features System Q Fader "FAD" Rear 15 — Front 15 Exit Audio Control mode (Volume control mode) Selecting the best sound setting preset for different types of music. 5 Exit Audio Control mode Press any button. 1 Select the source to set Press a button other than the [VOL] knob and Press the [SRC] button. [ATT] button. 2 Select the Sound type Press the [Q] button. When you press the button once, the current sound setting is displayed. Audio Setup Each time you press the button, the so
Resumo do conteúdo contido na página número 9
In Audio file source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE"* when setting the speaker type. Album name & Artist name "ALBUM"* 1 Enter Standby Folder name "FOLDER" Press the [SRC] button. File name "FILE" Select the "STANDBY" display. Track number & Play time "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In VCD source 3 Select the Speaker type Information Display Turn the [VOL] knob. Track
Resumo do conteúdo contido na página número 10
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate unlocks, allowing you to detach it. The audio system pauses. Listening to the audio during a call • The faceplate is a precision piece of equipment and Press the [SRC] button. can be damaged by sho
Resumo do conteúdo contido na página número 11
Tuner features Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automatic search for a st
Resumo do conteúdo contido na página número 12
Tuner features Station Preset Memory Frequency Step Setting Putting a station in the memory. Changing the tuning frequency step. The original setting is 50 kHz for FM band, and 9 1 Select the band kHz for AM band. Push the Control knob towards [FM] or [AM]. 1 Turn the power OFF 2 Select the frequency to put in the memory Press the [SRC] button for at least 1 second. Push the Control knob towards [4] or [¢]. 2 Switch the frequency step While pressing the [1] and [5] buttons, press 3 Put the fr
Resumo do conteúdo contido na página número 13
CD/Audio file/VCD control features Control knob IN indicator Track number Play time Playing CD, Audio file & VCD Fast Forwarding and Reversing When a disc is inserted Fast Forwarding Press the [SRC] button. Hold down the Control knob toward [¢]. Select the "CD" display. Release to resume the playback. Reversing Hold down the Control knob toward [4]. • When a CD is inserted, the "IN" indicator is ON. Release to resume the playback. Pause and play Press the Control knob. Each time you press the kn
Resumo do conteúdo contido na página número 14
CD/Audio file/VCD control features Track/File Search Scan Play Searching for a song on the disc or in the Audio Playing the first part of each song on the disc file folder. or Audio file folder you are listening to and searching for the song you want to hear. Push the Control knob towards [4] or [¢]. 1 Start Scan Play Press the [SCAN] button. "TRAC SCN"/"FILE SCN" is displayed. • If the remote control with number buttons is used as optional accessories, you can directly select a song 2 Rel
Resumo do conteúdo contido na página número 15
2 Select the folder level Text/Title Scroll Push the Control knob towards [FM] or [AM]. Scrolling the displayed CD text or Audio file text. With the [FM] of the Control knob, you move Push the Control knob toward [FM] for at 1 level down and with the [AM] of the Control least 2 seconds. knob, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or [¢]. With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob, to
Resumo do conteúdo contido na página número 16
Menu system Control knob Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc. 4 Exit Menu mode functions. Press the [MENU] button. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation • When other items those applicable to the basic explanation. operation method above are displayed, their setting content chart is entered. (N
Resumo do conteúdo contido na página número 17
In Standby mode In FM reception Manual Clock Adjustment CRSC (Clean Reception System Circuit) 1 Select Clock Adjustment mode Temporarily have reception alternate from Push the Control knob towards [FM] or [AM]. stereo to mono to reduce multi-path noise when Select the "CLK ADJ" display. listening to the FM station. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. Display Setting The clock display blinks. "CRSC ON" The CRSC is ON. "CRSC OFF" The CRSC is OFF. 3 Adjust the
Resumo do conteúdo contido na página número 18
Menu system In Standby mode Switches the NTSC/PAL setting Alternates to the NTSC broadcast mode or PAL broadcast mode setting. Display Setting "P/N PAL" Set this in the PAL broadcast mode area. "P/N NTSC" Set this in the NTSC broadcast mode area. • The PAL or NTSC setup must match the setup of the connected monitor unit. If they do not match, no image can be played. | 18 English
Resumo do conteúdo contido na página número 19
Accessories/ Installation Procedure 5. Connect the wiring harness connector to the Accessories unit. 6. Install the unit in your car. 1 7. Reconnect the - battery. 8. Press the reset button. ..........1 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short 2 circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. ..........2 • If the power is not turned ON (
Resumo do conteúdo contido na página número 20
Connecting Wires to Terminals Video output (Yellow) To the monitor unit Connection cable (Accessory6) Rear left output (White) Rear right output (Red) To parking brake detection switch harness of car. Parking sensor wire L (Light green) For the sake of safety, be sure to R connect the parking sensor. FM/AM antenna input Fuse (10A) Wiring harness If no connections are made, do not let the wire come out from the tab. (Accessory1) Power control wire (Blue/White) When using the optional power am
