Resumo do conteúdo contido na página número 1
KDC-MP4026V
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2687-00/01 (MW)
Resumo do conteúdo contido na página número 2
Contents Safety precautions 3 Menu system 19 Menu System Notes 5 Touch Sensor Tone Manual Clock Adjustment Notes on playing MP3/WMA 6 DSI (Disabled System Indicator) CRSC (Clean Reception System Circuit) About CDs 8 Auxiliary Input Display Setting & Station/Disc Naming General features 9 Text Scroll Power CD Read Setting Selecting the Source Built-in Auxiliary input Setting Volume Switches the NTSC/PAL setting Attenuator Basic Operations of remote 21 Loudness System Q Loading and Replacing the
Resumo do conteúdo contido na página número 3
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, take following precautions: the following precautions: • Insert the unit all the way in until it is fully locked • Make sure to ground the unit to a negative 12V in place. Otherwise it may fall out of place when DC power supply. jolted. • Do not open the top or bottom covers of the unit. • When extending the ignition, battery, or ground • Do not install the unit in a spot exposed to dire
Resumo do conteúdo contido na página número 4
Safety precautions About CD players/disc changers NOTE connected to this unit • If you experience problems during installation, KENWOOD disc changers/ CD players released in consult your Kenwood dealer. 1998 or later can be connected to this unit. • If the unit fails to operate properly, press the Reset Refer to the catalog or consult your Kenwood button. The unit returns to factory settings when dealer for connectable models of disc changers/ the Reset button is pressed. If the unit stil
Resumo do conteúdo contido na página número 5
Notes Cleaning the Unit The marking of products using lasers If the faceplate of this unit is stained, wipe it with a (Except for some areas) dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off CLASS 1 with a cloth moistened with neutral cleaner, then wipe neutral detergent off. LASER PRODUCT The label is attached to the chassis/case and says • Applying spray cleaner directly to the unit may affect its that the component uses laser beams that have
Resumo do conteúdo contido na página número 6
Notes on playing MP3/WMA KDC-MP4026V can play MP3(MPEG1, 2 Audio When you use your CD writer to record MP3/WMA Layer 3)/WMA. Note, however, that the MP3/WMA up to the maximum disc capacity, disable additional recording media and formats acceptable are writing. For recording on an empty disc up to the limited. When writing MP3/WMA, pay attention to maximum capacity at once, check Disc at Once. the following restrictions. Acceptable media • Play mode may not be possible when portions of the Th
Resumo do conteúdo contido na página número 7
MP3/WMA playing order When selected for play, Folder Search, File Search, When a File Search is executed with file ¡$ or for Folder Select, files and folders are accessed being played ... in the order in which they were written by the CD Operation of writer. (Current file: ¡$) the button Because of this, the order in which they are expected to be played may not match the order in 4 Button Beginning of file ¡$ ➜ ¡# which they are actually played. You may be able to ¢ Button ¡% ➜ ¡& set t
Resumo do conteúdo contido na página número 8
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
Resumo do conteúdo contido na página número 9
General features Release button VOL AM FM RDM REP ATT/LOUD Q/AUD SRC DISP/MENU 4 ¢ ATT indicator LOUD indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Press the [u] button. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Press the [d] button. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time the button is pressed the Attenuato
Resumo do conteúdo contido na página número 10
General features Loudness Adjustment Item Display Range Bass level "BAS" –8 — +8 Compensating for low and high tones during low Middle level "MID" –8 — +8 volume. Treble level "TRE" –8 — +8 Press the [LOUD] button for at least 1 second. Balance "BAL" Left 15 — Right 15 Each time the button is pressed for at least 1 Fader "FAD" Rear 15 — Front 15 second the Loudness turns ON or OFF. When it's ON, "LOUD" indicator is ON. 5 Exit Audio Control mode Press the [AUD] button. System Q You can recall t
Resumo do conteúdo contido na página número 11
Switching Display TEL Mute Switching the information displayed. The audio system automatically mutes when a call comes in. Press the [DISP] button. Each time the button is pressed the display When a call comes in switches as shown below. "CALL" is displayed. In Tuner source The audio system pauses. Information Display Listening to the audio during a call Frequency Press the [SRC] button. Station name or Frequency "SNPS" The "CALL" display disappears and the audio Clock system comes back ON. W
Resumo do conteúdo contido na página número 12
General features manual. Station/Disc Naming (SNPS/DNPS) • The title of station/CD can be changed by the same Attaching a title to a Station or a CD of the CD operation used to name it. Changer. 1 Receive/play the station/disc you want to attach a title to • A title can't be attached to MD or MP3/WMA media. • You cannot use the Disc Naming for the built-in CD player. Theft Deterrent Faceplate 2 Enter Menu mode The faceplate of the unit can be detached and Press the [MENU] button for at leas
Resumo do conteúdo contido na página número 13
Tuner features AM FM RDM REP 4 ¢ AUTO/ SRC 1-6 AME Frequency display Band display ST indicator Preset station number AUTO indicator between the FM1, FM2, and FM3 bands. Tuning Mode 3 Tune up or down band Choose the tuning mode. Press the [4] or [¢] button. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. • During reception of stereo stations the "ST" indicator is ON. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station
Resumo do conteúdo contido na página número 14
Tuner features Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. Frequency S
Resumo do conteúdo contido na página número 15
CD/MP3/WMA/VCD/External disc control features DISC– /AM DISC+ /SCRL /FM RDM REP 4 ¢ SRC 1 RDM/ F.SEL 3 SCAN/ REP M.RDM M/S Track Title/ Disc Title/ Folder name/ File name/ MP3/WMA text IN indicator • Data is not displayed and not played back if it is Playing CD & MP3/WMA & VCD recorded in the VDC title menu area for Playback Control. When a CD is inserted • You cannot use the PBC (Playback Control) function Press the [SRC] button. even if the media having the PBC function is played Select t
Resumo do conteúdo contido na página número 16
CD/MP3/WMA/VCD/External disc control features Fast Forwarding and Reversing Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or Fast Forwarding MP3/WMA folder you're listening to. Hold down on the [¢] button. Press the [REP] button. Release your finger to play the disc at that point. Each time the button is pressed the Repeat Play Reversing switches as shown below. Hold down on the [4] button. In CD/VCD & External disc source Release your finger to play the disc at th
Resumo do conteúdo contido na página número 17
Function of disc changer Canceling the Folder Select mode Press the [F.SEL] button. Magazine Random Play Play the songs on all the discs in the disc changer in random order. Function of VCD Press the [M.RDM] button. Each time the button is pressed the Magazine Audio output select Random Play turns ON or OFF. You can switch the audio output to STEREO, Left When it's ON, "MRDM ON" is displayed. or Right. Press the [M/S] button. • When the [¢] button is pressed, the next song Display Operation
Resumo do conteúdo contido na página número 18
Menu system AM FM RDM REP MENU SRC 4 ¢ Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed afterwards their setting content chart is entered. (Normally the and their setting content is after this operation uppermost setting in the chart is the ori
Resumo do conteúdo contido na página número 19
Manual Clock Adjustment Auxiliary Input Display Setting & Station/Disc Naming 1 Select Clock Adjustment mode For selecting the display when switched to Press the [FM] or [AM] button. Auxiliary input source. For the Station/Disc Select the "CLK ADJ" display. Naming refer to the 'Station/Disc Naming (SNPS/ 2 Enter Clock Adjust mode DNPS)' (page 12). Press the [4] or [¢] button for at least 2 seconds. 1 Select Auxiliary input source The clock display blinks. Press the [SRC] button. Select the "
Resumo do conteúdo contido na página número 20
Menu system Text Scroll Setting the displayed text scroll. • The PAL or NTSC setup must match the setup of the connected monitor unit. If they do not match, no Display Setting image can be played back. "SCL AUTO" Repeats scroll. "SCL MANU" Scrolls when the display changes. • The text scrolled is shown below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title In Standby mode CD Read Setting When there is a problem on playing a CD with special format, thi
