Manual do usuário Pioneer AVIC X710BT

Resumo do conteúdo contido na página número 1

AVIC X-Series Firmware Update Instructions
INSTRUCTIONS FOR DOWNLOADING FIRMWARE UPDATE
FOR AVIC-X910BT, AVIC-X710BT, AVIC-X9115BT and AVIC-
X7115BT
**After you download the firmware update files onto your computer, you will need to
transfer the files to an SD card (512MB or larger) in order to install them on your
navigation system.
Important
Please print or save these Instructions before downloading and installing the firmware update
-- it is very important that you complete all steps

Resumo do conteúdo contido na página número 2

Installing the System Firmware Update on Your Navigation System Step 2 Disconnect any iPod, iPhone, or USB device from the system before proceeding. After you have transferred the "LPUE080" folder onto the top layer/folder of your SD card, insert the SD card into your AVIC-X910BT / X710BT / X9115BT /X7115BT while your vehicle is turned OFF. Next, turn ON your vehicle and navigation system. The system will automatically start the update process in one minute. WARNING! While your navigatio

Resumo do conteúdo contido na página número 3

"Boot Up Screen" Step 5 Turn off your vehicle and turn on again, and wait for your system to boot up. Confirming that the Firmware Update was Successfully Installed Step 6 Please follow the steps below to confirm the update process was successful: 6-1. Confirm your System Firmware Version • Press the "Menu" button • Select the "Settings" tab • Select "System Settings" • Select "Service Information" • Confirm that your system correctly displays the following information: Ve