Resumo do conteúdo contido na página número 1
9" Portable On-camera LCD Monitor
User Manual
Model: HDSDI&HDMI, Waveform, Audio meter, Focus assist
DT-X91F
3GSDI&HDMI
DT-X91H
HDMI
DT-X91C
Resumo do conteúdo contido na página número 2
Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks are protected and other relative trademarks in this user manual are the properties of their respective owners. 3 ． Due to cons
Resumo do conteúdo contido na página número 3
Maintenance Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4. Please don't press the screen; the LCD
Resumo do conteúdo contido na página número 4
1. Features DT-X91F ◆ ◆◆ ◆ High resolution 9” LCD Panel ◆ ◆◆ ◆ Peaking focus assist (red/blue switch) 16:9, 1280×800, 16.77 million colors The Peaking focus assist function is to mark the ◆ ◆◆ ◆ Multiple inputs sharpest edges of the image with red or blue color, 2 HD/SD-SDI, 1 HDMI and 1 Composite input. for users to check if the subjects are focused. ◆ ◆ Loop through outputs ◆ ◆ Zebra stripes ◆ ◆ ◆ ◆ 2 HD/SD-SDI and 1 HDMI loop through output. Zebra Stripes are used to check if the
Resumo do conteúdo contido na página número 5
DT-X91H ◆ ◆◆ ◆ High resolution 9” LCD Panel ◆ ◆◆ ◆ DSLR scale zoom in 16:9, 1280×800, 16.77 million colors The Canon DSLR outputs the CMOS sensor ratio ◆ ◆◆ ◆ 3Gbps SDI support HDMI and this zoom in mode can make the Accepts 3G/HD/SD-SDI input. effective image scale full screen on the monitor. ◆ ◆◆ ◆ Multiple inputs ◆ ◆◆ ◆ User definable function keys 1 3G/HD/SD-SDI, 1 HDMI, 1 Composite input There are 2 function keys on the monitor front and L/R stereo audio. panel, that permit user
Resumo do conteúdo contido na página número 6
2. Panel Instruction DT-X91F Front view ⑴ PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio monitoring ⑵ POWER: Power on/off Connect with power cable, press the “POWER” and the power indicator is turned on and the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable or battery if the monitor will not be used for a period of time.
Resumo do conteúdo contido na página número 7
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ TALLY Light: Red, Green and Yellow 3-color TALLY indicator ⑶ Battery mount: Connect with SSL-JVC50 battery (optional) to power the monitor. ⑷ SDI-OUT: HDMI converted to SDI output (BNC connector) ⑹ ⑸ SDI LOOP1/2: HD/SD-SDI loop through output (BNC connector) ⑺ HDMI-IN: HDMI input ⑻ TALLY controlling port (RS-232): Terminal description is as follows: Terminal 1 2 3 4 5 6 7 8 9 D
Resumo do conteúdo contido na página número 8
DT-X91H Front view ⑴ PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio and analog audio monitoring ⑵ POWER: Power on/off Connect with power cable, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable or battery if the monitor will not be used for a period of time. ⑶ C
Resumo do conteúdo contido na página número 9
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ Battery mount: Connect with SSL-JVC50 battery (optional) to power the monitor. ⑶ CVBS IN: Composite video input (BNC connector) ⑷ SDI-LOOP: 3G/HD/SD-SDI loop through output (BNC connector) ⑸ SDI-IN: 3G/HD/SD-SDI input (BNC connector) ⑹ HDMI-LOOP: HDMI loop through output ⑺ HDMI-IN: HDMI input ⑻ TALLY controlling port (RS-232): terminal description is as follows: Terminal 1 2 3 4 5
Resumo do conteúdo contido na página número 10
DT-X91C Front view ⑴ PHONE: Earphone jack, for HDMI embedded audio and analog audio monitoring ⑵ POWER: Power on/off Connect with power cable, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable or battery if the monitor will not be used for a period of time. ⑶ CVBS: Press to switch
Resumo do conteúdo contido na página número 11
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ Battery mount: Connect with SSL-JVC50 battery (optional) to power the monitor. ⑶ CVBS IN: Composite video input (BNC connector) ⑷ HDMI-LOOP: HDMI loop through output ⑸ HDMI-IN: HDMI input ⑹ TALLY controlling port (RS-232): terminal description is as follows: Terminal 1 2 3 4 5 6 7 8 9 Description Y G R GND GND GND The RED light is on when connecting the terminal “R” with “GND”, and goes o
Resumo do conteúdo contido na página número 12
3. Menu Operation Press “MENU” and it will display menu system Revolve “OK” to select an item. The selected item will be highlighted display. Press “OK” to enter the selected item. Under menu system, press “MENU” to back to previous menu. The menu will automatically save and quit if it remains idle. 4. Picture Settings Submenu The Picture Settings Submenu includes: ⑴ CONTRAST: 0-100 value adjustment ⑵ BRIGHTNESS: 0-100 value adjustment ⑶ HUE: 0-100 value adjust
Resumo do conteúdo contido na página número 13
6. OSD Settings Submenu The OSD Settings Submenu includes: ⑴ LANGUAGE: Menu language English / Chinese selection ⑵ H-POSITION: Menu horizontal position (0-100) adjustment, real-time preview, default value: 50, center. ⑶ V-POSITION: Menu vertical position (0-100) adjustment, real-time preview, default value: 50, center. ⑷ DURATION: Menu timeout setting Set a time (in seconds) in which the menu will automatically quit if remains idle. Default: 10 seconds; Range: 5 seconds to 60 seconds
Resumo do conteúdo contido na página número 14
9. FUNCTION KEY Settings Submenu The F KEY Settings Submenu is to define Function Keys on the front keyboard. The DT-X91F has 3 function keys: F1, F2 and F3; The DT-X91H and DT-X91C has 2 function keys: F1 and F2. The available function items of each model are: -------------------DT-X91F------------------- -------------------DT-X91H------------------- 01-RATIO: Aspect ratio switch 01-RATIO: Aspect ratio switch 02-SCAN: Underscan / Overscan switch 02-SCAN: Underscan
Resumo do conteúdo contido na página número 15
10. Specifications LCD Performance Size 9.0 inches Resolution 1280 × RGB × 800 Aspect ratio 16:9/4:3 Color system NTSC/PAL 2 Brightness 250cd/m Contrast 700:1 Color 16.77 million colors Viewing angle H/V:140/120 Video Format 1080p (60 / 59.94 / 50) SMPTE-425M ** 1080i (60 / 59.94 / 50) SMPTE-274M 1080p (30 / 29.97 / 25 / 24 / 23.98) SDI * SMPTE-RP211 1080psf (30 / 29.97 / 25 / 24 / 23.98) SMPTE-296M 720p (60 / 59.94 / 50) SMPTE-125M 480i (59.94) ITU-R BT.656 576i (50) 480I
Resumo do conteúdo contido na página número 16
This model is manufactured, warranted and supported by SWIT Electronics Co., Ltd. / SWIT Electronics USA, LLC, and distributed in North America by JVC Professional Video Products. To obtain service or for further information, please contact: SWIT Electronics USA, LLC. Address: 4300 Stevens Creek Blvd., Suite 230, San Jose, CA 95129 Toll free: 1 866 986-SWIT (7948) • Tel: 408 260-8258 · Fax: 408 228-8438 Emai
