Manual do usuário Korg EASYSTART D1600MKII

Resumo do conteúdo contido na página número 1

EasyStart














D1600mkII Main Features

• Intuitive TouchView Interface

• No Audio Compression
• 24 channel, 8 buss digital mixer

• 16 track recorder, with a total of 128 virtual tracks
• Hi, Lo and adjustable mid frequency EQ for every channel

• Up to 11 simultaneous effects per song: 8 inserts, 2 masters and a final effect. Includes REMS mic, amp
and cabinet effects plus 98 effect chains and hundreds of programs

• Internal/External Mix Automation

Resumo do conteúdo contido na página número 2

D1600mkII EasyStart A quick overview of modes SONG/CDCD – This mode allows you to select songs, create a new song, rename a song, perform song editing functions (copy song, move song, protect song, etc.), use the Program Play function, listen to audio CD’s and burn a CDR/RW of your final mix. RECORD – Here you can select the Recording mode (“Input” or “Bounce”). The default setting to record tracks is “Input”. INPUT/TUNER – This mode allows you to assign the 8 analog and S/PDIFdi

Resumo do conteúdo contido na página número 3

D1600mkII EasyStart Creating a new song 1. After installing the internal hard drive (following the included instructions), connect the AC power cable and press the [MAIN] power key on the rear panel press the [POWER] key (red) on the top panel 2. Press the [SONG/CD] key, and then press the “SelSong” tab in the display. 3. Press the “New” button in the display select the “Song Type” as “16Bit/16Track” and the “Mixer Set” as “New” press “OK”. The display will indicate “NEW SONG” in

Resumo do conteúdo contido na página número 4

D1600mkII EasyStart Using the Insert Effects 1. Press the [INSERT EFFECT] key, and then press the “ ” popup button in the display to the right of “Assign”. 2. To assign an insert effect to a recorded track, select “PlayTrack” by pressing the “radio button” to the left of “PlayTrack”, and then press “OK”. (Note: To assign an insert effect to an audio source before recording it to a track, select “Input” by pressing the radio button to the left of “Input” and then press “OK”) 3. To sel

Resumo do conteúdo contido na página número 5

D1600mkII EasyStart Selecting Virtual Tracks and Editing tracks 1. Press the [TRACK] key. 2. Using the CURSOR keys and the DIAL, select which virtual track you will be listening to or recording to. To adjust Virtual Track settings for tracks 9-16, press the “Vtr9-16” tab in the display. For more info on Virtual tracks refer to the Owner’s Manual pgs. 27, 81. 3. To use the “EditTrk” function, you must first select a range of the song to be edited by storing an IN, OUT and TO location