Resumo do conteúdo contido na página número 1
WS-8010U
Wireless 433 MHz
Giant Radio Controlled Weather Center
Instruction Manual
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 Quick Set-up 3 Detailed Set-Up Guide Battery Installation 3-4 Program Mode Function Keys/Buttons 5 LCD Contrast Setting 6 Time Zone Setting 6 Daylight Saving Time Setting 6 Language Setting 6-7 12/24 hour Time Setting 7 Selecting °F or °C 7 World Time Setting 7 World/Local Time Display Setting 8 Graphic Time Display Options/Settings 8-9 Time and D
Resumo do conteúdo contido na página número 3
INVENTORY OF CONTENTS 1. WS-8010U—Giant Radio Controlled Weather Center. 2. TX4U—Remote Thermo-Hygro (temperature-humidity) includes: mounting bracket/receptor, rain cover, and two mounting screws. 3. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Three fresh 1.5V C batteries. 2. Two fresh 1.5V AA batteries. 3. Philips screwdriver. 4. Three mounting screws. QUICK SET-UP 1. Insert two AA batteries into the Remote Thermo-Hygro. 2. Insert three C
Resumo do conteúdo contido na página número 4
arrow, sliding the battery cover off. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (avoid start-up problems—make sure they do not spring free). 4. Replace the battery cover, and place the rain cover snugly onto the sensor. B. WEATHER CENTER 1. Remove the battery cover. Place a solid object in the space provided at the lower-central position of the battery cover (above the + and SET buttons), then push up and pull out on the battery cover.
Resumo do conteúdo contido na página número 5
PROGRAM MODE Indicates world time is shown WWVB Tower Icon Time display (indicates time reception) Indoor temperature Indoor humidity display display Tendency Forecast arrow icons Outdoor humidity Outdoor display temperature display Minute dots Satellite icon (indicates Date/Rain display Hour outdoor transmission) Triangle The Program Mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the W
Resumo do conteúdo contido na página número 6
II. SETTING THE LCD CONTRAST 1. Press the SET button, the default setting “LCD 5” will flash in the DATE DISPLAY. 2. There are 8 LCD contrast levels to choose from—“LCD 0” is the lightest and “LCD 7” is the darkest. 3. Press the + button to toggle through the various settings. 4. Press the SET button to confirm, and to advance to the Time Zone setting mode. III. TIME ZONE SETTING 1. Press the SET button two times to enter the Time Zone setting mode. 2. The default setting “ET –5”
Resumo do conteúdo contido na página número 7
English USA French F Italian I Dutch NL Danish DK Spanish E Japanese J German D 4. Press the SET button to confirm, and to advance to the 12/24 hour setting mode. VI. 12/24 HOUR SELECTION 1. Press the SET button five times to enter the 12/24 hour selection mode. 2. The default setting of “12h” will flash in the TIME DISPLAY. 3. Press the + button to select either “12h” (AM/PM mode) or “24h” (military time) time display. 4. Press the SET button to confirm, and to advance to t
Resumo do conteúdo contido na página número 8
IX. WORLD/LOCAL TIME DISPLAY Note: The World and Local Time can be displayed in three different ways. The Local Time can be the constant time shown, the World Time can be the constant time shown, or the World/Local Time can be displayed so that they show intermittently. The intermittent display option will show the times alternately in one-second increments until that option is confirmed then, they will show for five- second increments. When the World Time is being displayed, “WORLD” w
Resumo do conteúdo contido na página número 9
1. Press the SET button nine times to enter the Graphic Time Display Options setting mode. 2. The default setting “1” will flash in the DATE DISPLAY. 3. To shift to other Graphic Time Display Options, press the + button. The flashing option number in the DATE DISPLAY will shift from 1 through to 4 (depending on how many times the + button is pressed). 4. Press the SET button to confirm the setting, and to advance to the Local Time setting mode. XI. TIME AND DATE SETTINGS Note: Any
Resumo do conteúdo contido na página número 10
FEATURES I. ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is located in FT. Collins, Colorado, and transmits the exact time signal continuously throughout the United States at 60 kHz. The signal can be received from up to 2,000 miles away through the internal antenna in the Weather Center. However, due to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours.
Resumo do conteúdo contido na página número 11
although it is possible for the change to occur quickly. If the symbols do not change then the weather has not changed, or the change has been slow and gradual. B. WEATHER TENDENCY ARROWS There are 2 weather tendency arrows, one appearing on each side of the Weather Icons. One tendency arrow points up (on the left side of the Display) and one points down (on the right side of the Display). These arrows reflect current changes in the air pressure. An arrow pointing up indicates tha
Resumo do conteúdo contido na página número 12
4. In sequential order, install batteries into the sensors (follow the same battery installation procedures seen in section I. A). 5. Install batteries into the Weather Center. 6. Follow the Programming Mode instructions to program and set-up the Weather Center. B. SELECTING WHICH SENSOR DATA TO DISPLAY 1. To view the outdoor temperature and humidity from a different sensor, press key #1. A shift from a “boxed #1” to a “boxed #2” should be observed under the DATE DISPLAY (between th
Resumo do conteúdo contido na página número 13
2. Press key #2 again, and “RAIN 24h - -.- in” is displayed. This is the measure of the total number of inches of rainfall over a 24-hour period, updated daily at 7:00 am local time. 3. To return to the standard DATE DISPLAY of month/date/year, press key #2. VI. RAIN GAUGE SET-UP (optional) The WS-8010U has the optional feature of adding the TX5U Rain Gauge, which can be purchased through the same dealer as the WS-8010U or by contacting La Crosse Technology directly. The rain gauge
Resumo do conteúdo contido na página número 14
4. Press key #3 while the MINIMUM outdoor temperature is still displayed. “MAX” is now flashing to the right of where the forecast icon was, the MAXIMUM outdoor temperature and humidity, the time and the date of occurrence are all shown in the LCD. 5. Press key #3 to return to normal operating mode. (To exit the MINIMUM/ MAXIMUM mode, either press key #1 or key #2, or wait for the 20-second automatic timeout). Note: The data displayed in the Outdoor MINIMUM/MAXIMUM fields are depend
Resumo do conteúdo contido na página número 15
MOUNTING Note: Before permanently mounting ensure that the Weather Center is able to receive WWVB signals from the desired location. Extreme and sudden changes in temperature will decrease the accuracy of the Weather Center, and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a true temperature reading, avoid mounting the TX4U—Remote Thermo-Hygro
Resumo do conteúdo contido na página número 16
6. Fit the mounting post (on the back of the sensor) into the receptor of the mounting bracket. B. MOUNTING WITH ADHESIVE TAPE 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. 2. Remove the protective strip from one side of the tape. Press firmly onto the designated area on the back of the mounting bracket. 3. Remove the protective strip from the other sid
Resumo do conteúdo contido na página número 17
TROUBLESHOOTING Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure Weather Center is at least 6 feet from any electrical devices, such as televisions, computers, or other radio-controlled clocks. 3) Remove batteries for 5 minutes, reinsert and leave the unit alone overnight without pressing buttons. 4) If there are still problems, contact La Crosse Technology. Problem: Hour is incorrect (minute and date are correct). Solution: Be sure corre
Resumo do conteúdo contido na página número 18
SPECIFICATIONS Temperature measuring range Indoor: 32 °F to 140 °F with 0.2 °F resolution. (0 °C to 59.9 °C with 0.1 °C resolution). Outdoor: -21 °F to 140 °F with 0.2 °F resolution. (-29.9 °C to 59.9 °C with 0.1 °C resolution). Relative Humidity measuring range Indoor/Outdoor: 20% to 95% with 1% resolution. Indoor Temperature checking interval: Every 10 seconds. Indoor Humidity checking interval: Every 20 seconds. Outdoor Temperature/Humidity 2 times every 10 minutes. re
Resumo do conteúdo contido na página número 19
warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. L
Resumo do conteúdo contido na página número 20
FCC ID: OMO-01TX (sensor), OMO-01RX (receiver) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 20
